富含黄铁矿的煤矸石中碳酸盐影响其风化淋溶性质的研究

富含黄铁矿的煤矸石在风化淋溶过程中，碳酸盐含量不仅控制其风化程度，而且控制淋溶液的酸度。风化淋溶实验结果表明，Ｆｅ的淋溶量主要受控于酸度，而Ｍｎ＾２＋与ＳＯ４＾２－的淋溶量主要取决于其风化程度。     

中药青蒿的生理生化特征及其研究进展

中药青蒿即黄花蒿 (ＡｒｔｅｍｉｓｉａａｎｎｕａＬ .) ,与分类学上的青蒿 (Ａｒｔｅｍｉｓｉａａｐｉａｃｅａ)同属菊科 (ＡｓｔｅｒａｃｅａｅｏｒＣｏｍｐｏｓｉｔａｅ)蒿属(Ａｒｔｅｍｉｓｉａ) ,两者均为一年生草本植物且形态上非常相似 ,最明显的区别是黄花蒿的叶片为三回羽状全裂 ,而青蒿为二回羽状全裂 .青蒿广泛分布于全国各地 ,多生于海拔 40 0ｍ以下的丘陵平地[1] .现在这种植物广泛分布于世界各地[2 ] .青蒿在许多地区被用于编制花环 ,提取香料 ,更重要的是从青蒿中分离出的青蒿素是所有抗疟药中起效最快、疗效最好、毒性最低…     

中药青蒿鲨烯合酶的大肠杆菌表达、纯化与功能鉴定

利用PCR方法,将经RACE方法克隆到的中药青蒿鲨烯合酶cDNA(AF302464)开放阅读框的3′末端截短99bp,插入到原核表达载体pET30a( )的NcoⅠ和BamHⅠ酶切位点之间,构建N端和C端均携带有HIS6表达标签的鲨烯合酶重组表达载体pETSSA.将pETSSA转入大肠杆菌BL21(DE3),0.5mmol/LIPTG(isopropyl-beta-D-thiogalactoside)28℃诱导重组鲨烯合酶的表达.表达产物经镍琼脂糖柱纯化.纯化蛋白加入酶促反应体系(含FPP和NADPH),GC-MS分析酶促反应体系的正己烷萃取物,结果显示重组鲨烯合酶可以催化FPP向鲨烯的转化.青蒿鲨烯合酶的功能鉴定为进一步利用反义或RNAi技术限制甾类生物合成,从而提高青蒿中的青蒿素含量提供了基础.图5参15     

大连湾挥发性有机污染物挥发速率常数估算

本文采用气－液双膜模型和大连湾水文参数，对大连湾检测出的挥发性有机物的挥发速率常数进行估算。结果表明，三氯乙烯等１４种挥发性有机物在大连湾海域中的挥发速率常数在８．０×１０＾－３ｈ－１－１．４×１０＾－２×＾－１之间，挥发半衰期在５０ｈ＝８０ｈ之间。因此，挥发至大气是这些在机物主要归宿。     

钢铁渣粉对混凝土中钢筋的保护作用

钢渣和矿渣是冶炼钢、铁过程中产生的固体废物.由于其矿物组成与水泥熟料相似,具有水硬胶凝性能,所以被用作混凝土掺合料.钢铁渣粉是钢渣粉和矿渣粉接一定的比例混合而成的.试验表明,钢铁渣粉的使用能够保留钢渣粉和矿渣粉单掺时的优点,弥补单掺时的缺点,对钢筋起到很好的保护作用.     

炼厂罐区排气减排及集中收集设计

在对储罐排气达标治理时,首先需要采用源头减排措施,减少储罐排气量。在此基础上,核算储罐排气量、吸气量及安全承压等,设计合理的储罐氮气保护系统、储罐排气集中收集系统、罐区排气压力控制系统,实现储罐排气密闭收集和罐区安全稳定运行。某炼油厂储运部21台储罐在正常工况时其大呼吸和小呼吸最大吸气量为876m3/h;但当遇暴雨时,罐区瞬时最大吸气量为2760m3/h,以0.6MPa氮气为补氮源,补氮总管管径需设计为DN100;该罐区最大排气量876m3/h,为了满足储罐排气安全输送,排气收集总管管径需设计为DN200。以混合二甲苯储罐为例,核算了储罐的承压压力、呼吸阀工作压力等,设置储罐排气操作压力范围为600~1200Pa、补氮操作压力范围为200~500Pa。     

Interaction between Cu and different types of surface-modified nanoscale zero-valent iron during their transport in porous media

This study investigated the interaction between Cu^2 + and nano zero-valent iron (NZVI) coated with three types of stabilizers (i.e., polyacrylic acid [PAA], Tween-20 and starch) by examining the Cu^2 + uptake, colloidal stability and mobility of surface-modified NZVI (SM-NZVI) in the presence of Cu^2 +. The uptake of Cu^2 + by SM-NZVI and the colloidal stability of the Cu-bearing SM-NZVI were examined in batch tests. The results showed that NZVI coated with different modifiers exhibited different affinities for Cu^2 +, which resulted in varying colloidal stability of different SM-NZVI in the presence of Cu^2 +. The presence of Cu^2 + exerted a slight influence on the aggregation and settling of NZVI modified with PAA or Tween-20. However, the presence of Cu^2 + caused significant aggregation and sedimentation of starch-modified NZVI, which is due to Cu^2 + complexation with the starch molecules coated on the surface of the particles. Column experiments were conducted to investigate the co-transport of Cu^2 + in association with SM-NZVI in water-saturated quartz sand. It was presumed that a physical straining mechanism accounted for the retention of Cu-bearing SM-NZVI in the porous media. Moreover, the enhanced aggregation of SM-NZVI in the presence of Cu^2 + may be contributing to this straining effect.