赭石对模拟重金属废水的吸附效果研究

采用模拟重金属废水的正交试验设计,进行赭石对模拟重金属废水的吸附效果研究,探讨pH、赭石加入量和振荡时间等影响因素对吸附效果的影响。结果表明,在一定pH、赭石加入量和振荡时间条件下,赭石对6种重金属（Pb、Cd、Mn、Zn、Cr和Ni）均有较好吸附效果,对Pb、Cd、Mn、Zn和Cr的最大吸附率可达100%,对Ni的吸附率达8963%。处理后废水中重金属达到污水排放标准。各影响因素对Mn、Zn和Cr吸附效率的影响大小表现为：pH＞赭石加入量＞振荡时间,Ni和Cd表现为：赭石加入量＞pH＞振荡时间,Pb表现为：pH＞振荡时间＞赭石加入量。赭石对废水中重金属吸附的最佳条件为赭石加入量40 g/L,pH 10～10.5,振荡时间2 h。     

Investigation of a new approach to decompose two potent greenhouse gases: photoreduction of SF(6) and SF(5)CF(3) in the presence of acetone

In this paper, we addressed the utilization of photochemical method as an innovative technology for the destruction and removal of two potent greenhouse gases, SF(6) and SF(5)CF(3). The destruction and removal efficiency (DRE) of the process was determined as a function of excitation wavelength, irradiation time, initial ratio of acetone to SF(5)X (X represented F or CF(3)), initial SF(5)X concentration, additive oxygen and water vapor concentration. A complete removal was achieved by a radiation period of 55min and 120min for SF(6)-CH(3)COCH(3) system and SF(5)CF(3)-CH(3)COCH(3) system respectively under 184.9nm irradiation. Extra addition of water vapor can enhance DRE by approximately 6% points in both systems. Further studies with GC/MS and FT-IR proved that no hazardous products such as S(2)F(10), SO(2)F(2), SOF(2), SOF(4) were generated in this process.     

家居室内设计及新进展的思考

在对传统室内设计基本观点阐述与理解的基础上分析其整体性、可持续发展,并着重探讨在物质文明和精神文明高度发展的今天,现代室内设计在个性化、自然性、现代性、艺术性等方面发展的新趋势.通过对现代室内设计特点和发展趋势的分析,创造出一个适合人们现代生活的理想空间.     

Different reaction mechanisms of diphenylether and 4-bromodiphenylether with nitrous acid in the 355 nm laser flash photolysis of mixed aqueous solution

The microscopic reaction mechanisms of diphenylether (DPE) and 4-bromodiphenylether (4-BrDPE) with nitrous acid (HNO(2)) in the absence of O(2) have been explored by the 355nm laser flash photolysis. It was proposed that OH radical, from the photolysis of HNO(2), added to DPE forms the C(12)H(10)O-OH adduct while added to 4-BrDPE forms the 4-BrDPE-OH and 4-BrOH-DPE adducts. The first-order decay rate constants of the C(12)H(10)O-OH adduct, 4-BrDPE-OH adduct and 4-BrOH-DPE adduct were measured to be (1.86+/-0.14)x10(5)s(-1), (2.19+/-0.04)x10(5)s(-1) and (1.56+/-0.03)x10(5)s(-1), respectively. The final photolysis products of DPE and HNO(2) identified by GC/MS analysis were phenol, o-hydroxydiphenylether, p-hydroxydiphenylether and p-nitrodiphenylether, while the final photolysis product of 4-BrDPE and HNO(2) identified by LC/MS analysis was mainly the dimer.     

Spatial–temporal dynamics of NDVI and Chl-a concentration from 1998 to 2009 in the East coastal zone of China: integrating terrestrial and oceanic components

Annual normalized difference vegetation index (NDVI) and chlorophyll-a (Chl-a) concentration are the most important large-scale indicators of terrestrial and oceanic ecosystem net primary productivity. In this paper, the Sea-viewing Wide Field-of-view Sensor level 3 standard mapped image annual products from 1998 to 2009 are used to study the spatial–temporal characters of terrestrial NDVI and oceanic Chl-a concentration on two sides of the coastline of China by using the methods of mean value (M), coefficient of variation (CV), the slope of unary linear regression model (Slope), and the Hurst index (H). In detail, we researched and analyzed the spatial–temporal dynamics, the longitudinal zonality and latitudinal zonality, the direction, intensity, and persistency of historical changes. The results showed that: (1) spatial patterns of M and CV between NDVI and Chl-a concentration from 1998 to 2009 were very different. The dynamic variation of terrestrial NDVI was much mild, while the variation of oceanic Chl-a concentration was relatively much larger; (2) distinct longitudinal zonality was found for Chl-a concentration and NDVI due to their hypersensitivity to the distance to shoreline, and strong latitudinal zonality existed for Chl-a concentration while terrestrial NDVI had a very weak latitudinal zonality; (3) overall, the NDVI showed a slight decreasing trend while the Chl-a concentration showed a significant increasing trend in the past 12 years, and both of them exhibit strong self-similarity and long-range dependence which indicates opposite future trends between land and ocean.     

我国农药工业三废治理方法

详细介绍了我国农药生产中排放的废水、废气、废渣的常用治理技术,通过改进生产工艺和回收利用减少三废的实例,以及主要品系农药生产废水治理方法选择的思路。     

不同火灾规模下隧道水幕线性喷水强度的研究

为了探究火源功率和水幕线性喷水强度对烟气特征参数和水幕阻烟隔热能力的影响,以全尺寸隧道为研究对象,采用FDS数值模拟方法,还原验证了前人使用的小尺寸模型,研究了20组工况下烟气特征参数变化的规律。研究结果表明:根据相似性原理还原后的全尺寸模型在相同工况下的模拟结果与小尺寸实验基本一致;水幕系统降低遮光率的效果随线性喷水强度增加而增强,当线性喷水强度增至一定程度时,遮光率和隔热效率无明显变化;对于中、大型规模火灾,水幕有效作用时间出现减少的情况;火源功率为5,20,30 MW的小、中、大规模的隧道火灾,综合考虑经济性和水幕效果,建议分别选择水幕的线性喷水强度为8,14,16 L/(s瘙
簚m)。     

Sb release characteristics of the solid waste produced in antimony mining smelting process

Sb release characteristics of blast furnace slag, mining waste rock and tailing sand were investigated in static immersion and dynamic leaching test. These three kinds of waste samples were collected from the antimony mine in Lengshuijiang, China, produced in mining smelting process. Effects of solid/liquid ratio, sample size and pH of leaching solution on Sb release characteristics were inspected based on the analysis of scanning electron microscope, pH and EC of leachate. The optimal parameters for Sb leaching of each sample were analyzed. For blast furnace slag and mining waste rock, Sb release contents increased along with the decline of solid/liquid ratio. The maximum accumulative release contents were 42.13, 34.26 mg/kg at the solid/liquid ratio of 1:20. While Sb release content for tailing sand decreased first and then increased with the reduction of solid/liquid ratio. When the solid/liquid ratio was 1:5, the accumulative Sb release content reached the most (24.30 mg/kg). Sb release content of mining waste rock increased with the drop of leaching solution pH, with the highest accumulative release content of 26.01 mg/kg at pH 2.0. Sb release contents of blast furnace slag and tailing sand showed positive correlation with the variation of leaching solution pH. The maximum accumulative release contents of these two samples were 215.91 and 147.83 mg/kg, respectively, when leaching solution pH was 7.0. In summary, Sb release capacity of the three samples in descending order was tailing sand, blast furnace slag and mining waste rock. pH and EC of the leachate in dynamic test varied independently with the initial pH of leaching solution while showing close relationship with mineral hydrolysis in the waste.