天山乌鲁木齐河源1号冰川区气溶胶水溶性离子变化特征及来源分析

基于2007年4、8和10月这3个时段不同季节的野外考察取样和实验室分析测试,探讨了天山乌鲁木齐河源1号冰川区气溶胶样品中水溶性离子成分的浓度组成、变化特征及其可能来源.结果表明,气溶胶水溶性离子平均浓度为2.76μg·m-3,化学组成以Ca2+、NO-3和SO2-4为主.Ca2+、SO2-4、NH+4、Na+、Mg2+、Cl-在春、夏、秋这3个季节的变化趋势与总离子浓度的变化趋势一致,均为夏季最高、秋季次之、春季最低,而K+与NO-3却呈现出秋季最高、夏季和春季浓度次之的季节变化特征.分析认为,气溶胶中Ca2+、Na+、Mg2+、K+和Cl-主要可能来自陆源矿物;而NO-3和NH+4则很大程度上以人为源为主.并且发现,SO2-4可能同时受陆地源与人类活动来源的影响.     

羧基化碳纳米管载铂催化剂对微生物燃料电池阴极氧还原性能的影响

阴极催化剂是影响微生物燃料电池(microbial fuel cell,MFC)性能的关键要素.为了考察不同羧基化方法改性的碳纳米管(carbon nanotube,CNT)负载Pt的催化氧还原效率,分别在80℃和95℃条件下对CNT进行了羧基化,采用浸渍-沉淀法制备了Pt/CNT催化剂(Pt/CNT-80和Pt/CNT-95),并在空气阴极MFC体系中验证了其催化氧还原效果(MFC-80、MFC-95和MFC-C).结果表明,MFC-95和MFC-80的最大功率密度分别为568.8 mW.m-2和412.8 mW.m-2,内阻分别为204.7Ω和207.7Ω,开路电压分别为0.719 V和0.651 V.而对照MFC-C的最大功率密度仅为5.4 mW.m-2,内阻为826.2Ω.XPS和XRD分析结果显示,Pt/CNT-95催化氧还原效果优于Pt/CNT-80,原因可能是95℃羧基化过程在CNT表面引入了丰富的含氧基团.     

我国沿海地区城镇污水处理厂污泥重金属污染状况及其处置分析

采用ICP-MS分析法测定了我国3个典型沿海城市广州、上海和大连共13个污水处理厂污泥的7种重金属含量,并与2006年和2001年的数据进行了对比,以了解我国沿海城市污水处理厂重金属污染状况、变化趋势和处置方案.结果表明,我国沿海城市污泥中重金属污染分布存在较大差异,7种重金属平均含量大小顺序为Cr>Zn>Cu>Pb>As>Hg>Cd,Cr、Cu和As的含量超出了《城镇污水处理厂污染物排放标准》,污染严重.相对于以前,我国沿海城市污泥中Zn的含量明显减少,Pb、Hg和Cd的含量与没有明显变化,但Cr、Cu、As均明显增加.各区域各类型污水处理厂城市污泥重金属含量分析表明,来源于工业废水的城市污泥中Zn、Cu和Hg的平均含量较生活污水为主的污泥高;广州污水处理厂城市污泥中Cr、Pb、As、Hg和Cd的含量均高于上海和大连.沿海城市污水处理厂中超出《城镇污水处理厂污染物排放标准》中污泥农用标准限值的占总调查污水处理厂的23%,我国沿海城市污泥大部分仍可采用污泥农用的有益处置方式进行处置.同时,本次调查数据也为我国沿海城市开展污水污泥海洋倾倒相关技术标准的制定提供了基础数据.     

单光子/光电子在线质谱实时分析聚氯乙烯热分解/燃烧产物

实验室研制了低能光电子磁场增强电离(MEPEI)和单光子电离(SPI)复合电离源,该电离源具有电离化合物范围宽、碎片离子少、质谱图简单等优点,结合飞行时间质谱(TOF-MS)实现了聚氯乙烯(PVC)热分解/燃烧产物的在线分析.针对不同的目标化合物,MEPEI/SPI复合电离源通过调节电离区电场强度,可以快速在SPI和SPI-MEPEI之间切换.PVC热分解/燃烧产物中电离能大于光子能量(10.60 eV)的HCl和CO2(12.74 eV、13.77 eV)利用MEPEI模式电离;而烯烃、二氯乙烯、苯系物、氯苯、苯乙烯、茚满及萘系物等可通过SPI-MEPEI复合模式电离.通过实时监测PVC主要燃烧产物的信号强度随温度的变化趋势可推断出,PVC燃烧产物主要是通过两种机制生成:①250～370℃时,PVC发生脱氯及分子内环化反应,产生大量的HCl、苯和萘;②380～510℃时,PVC发生分子间交联反应,生成烷基芳烃,如甲苯和二甲苯/乙苯等.实验结果表明,SPI/SPI-MEPEI复合离子源TOF-MS分析速度快,应用范围广,在在线分析中具有广泛的应用前景.     

北京市居家空气微生物粒径及分布特征研究

室内外空气微生物对人们健康的危害不仅与微生物的种类和浓度有关,而且还与微生物粒子的大小及粒径分布特征密切相关,并且不同粒径的空气微生物对人们健康影响的作用机制不同.在北京市不同方向选取31户有1～10岁儿童的家庭进行空气微生物取样,系统研究了室内家庭空气微生物粒径及分布特征.结果表明,室内空气细菌和真菌粒径分布特征不随家庭环境、季节特征、儿童性别、房屋结构的变化而变化,但空气细菌和真菌的粒径分布特征不同.总体上空气细菌和真菌粒径均呈对数正态分布,但空气细菌粒子百分比从Ⅰ级(>8.2μm)到Ⅴ级(1.0～2.0μm)逐渐增加,Ⅵ级(<1.0μm)细菌粒子百分比急剧下降,最高值出现在Ⅴ级,而空气真菌粒径百分比从Ⅰ级～Ⅳ级(2.0～3.5μm)逐渐增加,而后从Ⅳ级～Ⅵ级真菌粒径百分比急剧下降,最高值出现在Ⅳ级.不同优势真菌属的粒径分布也不相同,枝孢属、青霉属和曲霉属呈对数正态分布,最高值出现在Ⅳ级,而链格孢属为偏态分布,最高值出现在Ⅱ级(5.0～10.4μm).室内空气细菌的中值直径明显大于空气真菌,1 a中空气细菌和真菌春、夏、秋季的粒径明显大于冬季.     

Factors influencing the contents of metals and As in soils around the watershed of Guanting Reservoir, China

Topsoil samples from 61 sites around the Guanting Reservoir,China,were measured for Cu,Zn,Cr,Ni,Cd,Pb and As concentrations.The mean concentrations of Cu,Zn,Cr,Ni,Cd,Pb and As were 16.8,59.4,37.8,18.3,0.32,20.1 and 8.67 mg/kg dry weight,respectively.Factors that influence the dynamics of these metals in soils around the watersheds of Beijing reservoirs were examined.The influence of atmospheric deposition,land use,soil texture,soil type and soil chemical parameters on metal contents in soils was investigated.Atmospheric deposition,land use and soil texture were the important factors affecting heavy metal residues.Soil type and soil chemical parameters were also involved in heavy metal retention in soils.The data provided in this study are considered crucial for reservoir remediation,especially since the Guanting Reservoir will serve as one of the main drinking water sources for Beijing in the foreseeable future.     

明胶厂剩余高钙污泥作为燃煤固硫剂的应用研究

明胶生产产业在废水处理工艺中产生大量剩余高钙污泥,采用该剩余污泥作为燃煤固硫剂,在高温管式电阻炉内进行燃烧实验,通过测定燃烧前和燃烧后样品中的硫含量确定该剩余污泥的固硫效果。通过单因素研究煤粉粒径、剩余污泥粒径和剩余污泥/煤样%等影响因素对固硫率的影响。在单因素试验的基础上通过正交设计法优选达到较高固硫率的实验条件。实验结果表明:影响固硫率的因素从大到小依次为燃烧温度>剩余污泥/煤样%>煤粉粒径>剩余污泥粒径。以剩余污泥作为固硫剂,固硫率最高的实验条件为:燃烧温度800℃,剩余污泥/煤样为3%,煤粉粒径60⁹0目,剩余污泥粒径9090目,剩余污泥粒径90¹20目。并且,当温度达到1150℃,煤粉粒径90120目。并且,当温度达到1150℃,煤粉粒径90¹20目,剩余污泥粒径为60120目,剩余污泥粒径为60⁹0目,污泥/煤样(质量比)为3%时,固硫率可达62.78%,说明在高温下该剩余污泥保持较高的固硫率。将明胶厂剩余污泥作为固硫剂是较为合适的再利用方法,可有效缓解当前该污泥大量堆积污染环境的状况。     

Metal loaded zeolite adsorbents for hydrogen cyanide removal

Metal(Cu,Co,or Zn) loaded ZSM-5 and Y zeolite adsorbents were prepared for the adsorption of hydrogen cyanide(HCN) toxic gas.The results showed that the HCN breakthrough capacity was enhanced significantly when zeolites were loaded with Cu.The physical and chemical properties of the adsorbents that influence the HCN adsorption capacity were analyzed.The maximal HCN breakthrough capacities were about the same for both zeolites at 2.2 mol of HCN/mol of Cu.The Cu2p XPS spectra showed that the possible species present were Cu2O and CuO.The N1s XPS data and FT-IR spectra indicated that CNwould be formed in the presence of Cu+/Cu2+ and oxygen gas,and the reaction product could be adsorbed onto Cu/ZSM-5 zeolite more easily than HCN.     

Adsorption of 2-mercaptobenzothiazole from aqueous solution by organo-bentonite

The adsorption behavior of 2-mercaptobenzothiazole onto organo-bentonite was investigated.Natural bentonite from Gaozhou in Guangdong Province,China was collected.Organo-bentonite was prepared by intercalation of cetyltrimethyl ammonium bromide into the natural bentonite.The physicochemical properties of the prepared organo-bentonite were characterized by X-ray diffraction,N2 adsorption-desorption isotherm and Fourier transform infrared spectroscopy.The results showed that montmorillonite is the main component of the natural bentonite.The basal spacing of the natural bentonite is 1.47 nm,which increased to 1.98 nm on intercalation with cetyltrimethyl ammonium bromide.Moreover,both the surface area and pore volume increased with intercalation.Clear CH2 stretching(3000-2800 cm-1) and scissoring(1480-1450 cm-1) modes of the intercalated surfactants were observed for organobentonite.Compared with the pseudo first-order kinetic model,the pseudo second-order kinetic model is more suitable to describe the adsorption kinetics of 2-mercaptobenzothiazole onto organo-bentonite.The adsorption capacity of 2-mercaptobenzothiazole onto organo-bentonite increased with increasing initial concentration of 2-mercaptobenzothiazole,but decreased with increasing adsorbent dosage.The adsorption isotherm of 2-mercaptobenzothiazole onto organo-bentonite fits well with the Langmuir model.The maximum adsorption capacity of organo-bentonite for 2-mercaptobenzothiazole was 33.61 mg/g,indicating that organo-bentonite is a promising adsorbent for 2-mercaptobenzothiazole.     

Decrease of NH4+-N by bacterioplankton accelerated the removal of cyanobacterial blooms in aerated aquatic ecosystem

We used aerated systems to assess the influence of the bacterioplankton community on cyanobacterial blooms in algae/post-bloom of Lake Taihu, China. Bacterioplankton community diversity was evaluated by polymerase chain reaction-denaturing gradient gel electrophoresis(PCR-DGGE) fingerprinting. Chemical analysis and nitrogen dynamic changes illustrated that NH4+-N was nitrified to NO2-N and NO3-N by bacterioplankton. Finally, NH4+-N was exhausted and NO3-N was denitrified to NO2-N, while the accumulation of NO2-N indicated that bacterioplankton with completely aerobic denitrification ability were lacking in the water samples collected from Lake Taihu. We suggested that adding completely aerobic denitrification bacteria(to denitrify NO2-N to N2)would improve the water quality. PCR-DGGE and sequencing results showed that more than 1/3 of the bacterial species were associated with the removal of nitrogen, and Acidovorax temperans was the dominant one. PCR-DGGE, variation of nitrogen, removal efciencies of chlorophyll-a and canonical correspondence analysis indicated that the bacterioplankton significantly influenced the physiological and biochemical changes of cyanobacteria. Additionally, the unweighted pair-group method with arithmetic means revealed there was no obvious harm to the microecosystem from aeration. The present study demonstrated that bacterioplankton can play crucial roles in aerated ecosystems, which could control the impact of cyanobacterial blooms in eutrophicated fresh water systems.