Catalytic hydrogenation rate of polycyclic aromatic hydrocarbons in supercritical carbon dioxide containing polymer-stabilized palladium nanoparticles

Catalytic hydrogenation of polycyclic aromatic hydrocarbons (PAHs) with up to four fused benzene rings over high-density-polyethylene-stabilized palladium nanoparticles in supercritical carbon dioxide via in situ UV/Vis spectroscopy is presented. PAHs can be efficiently converted to saturated polycyclic hydrocarbons using this green technique under mild conditions at 20 MPa of CO₂ containing 1 MPa of H₂ at 40-50 °C. Kinetic studies based on in situ UV/Vis spectra of the CO₂ phase reveal that the initial hydrogenation of a given PAH and the subsequent hydrogenations of its intermediates are pseudo-first-order. The hydrogenation rate of the latter is always much smaller than that of the former probably due to increasing steric hindrance introduced by the hydrogenated benzene rings of PAHs which impedes the adsorption process and hydrogen access to PAHs on catalyst surfaces.     

Acute,chronic and biochemical effects of chlorothalonil on <Emphasis Type="Italic">Agalychnis callidryas</Emphasis>, <Emphasis Type="Italic">Isthmohyla pseudopuma</Emphasis> and <Emphasis Type="Italic">Smilisca baudinii</Emphasis> tadpoles

Declines of amphibian populations have been a worldwide issue of concern for the scientific community during the last several decades. Efforts are being carried out to elucidate factors related to this phenomenon. Among these factors, pathogens, climate change, and environmental pollution have been suggested as possible causes. Regarding environmental pollutants, some pesticides are persistent in the environment and capable of being transported long distances from their release point. In Costa Rica, some pesticides have been detected in protected areas, at locations where amphibian populations have declined. Information about toxicity of pesticides used in Costa Rican agriculture to amphibians is still scarce, particularly for native species.Toxicity tests with chlorothalonil, a fungicide intensively used in Costa Rica, were carried out exposing tadpoles of three Costa Rican native species: Agalychnis callidryas, Isthmohyla pseudopuma, and Smilisca baudinii in order to evaluate acute and chronic toxicity as well as the biomarkers cholinesterase activity (ChE), glutathione-S transferase activity (GST), and lipid peroxidation (LPO).96-h LC₅₀: 26.6 (18.9–35.8) μg/L to A. callidryas, 25.5 (21.3–29.7) μg/L to I pseudopuma and 32.3 (26.3–39.7) μg/L to S. baudinii were determined for chlorothalonil. These three species of anurans are among the most sensitive to chlorothalonil according to the literature. Besides, GST was induced in S. baudinii after exposure to sub-lethal concentrations of chlorothalonil while evisceration occurred in S. baudinii and A. callidryas tadpoles exposed to lethal concentrations of the fungicide. Chronic exposure to sub-lethal concentrations accelerated development in S. baudinii and caused lesions in tail of S. baudinii and I. pseudopuma tadpoles. Our results demonstrate that chlorothalonil is highly toxic to native amphibian species and that low concentrations can cause biochemical responses related to phase II of biotransformation and effects on development.     

Preparation and Properties of Poly (Lactic Acid) Nanocomposites Filled with Functionalized Single-Walled Carbon Nanotubes

This work prepared poly (lactic acid) (PLA)/single-walled carbon nanotubes (SWCNTs) composites using a solution blend method, and investigated the influence of the physical properties of PLA/SWCNTs composites. In order to enhanced interfacial interactions between PLA and SWCNTs, the purified SWCNTs were given functionalisation treatments with a nitric acid/sulfuric acid mixture. These acid-treated SWCNTs (A-SWCNTs) were then grafted with 3-isocyanatopropyl triethoxysilane (A-SWCNTs-Si). When these functionalized SWCNTs were used to fill the PLA matrix, the fractured surface of composite does not present the pullout phenomenon. The dimensional stability obviously increased by a factor of approximately 72. The storage modulus was also significantly improved. The surface resistivity of the PLA/SWCNTs composites decreased from 1 × 10¹⁶ to 2.22 × 10⁴ Ω/cm².     

Reductive dechlorination for remediation of polychlorinated biphenyls

Technologies such as thermal, oxidative, reductive, and microbial methods for the remediation of polychlorinated biphenyls (PCBs) have previously been reviewed. Based on energy consumption, formation of PCDD/F, and remediation efficiency, reductive methods have emerged as being advantageous for remediation of PCBs. However, many new developments in this field have not been systematically reviewed. Therefore, reductive technologies published in the last decade related to remediation of PCBs will be reviewed here. Three categories, including catalytic hydrodechlorination with H₂, Fe-based reductive dechlorination, and other reductive dechlorination methods (e.g., hydrogen-transfer dechlorination, base-catalyzed dechlorination, and sodium dispersion) are specifically reviewed. In addition, the advantages of each remediation technology are discussed. In this review, 108 articles are referenced.     

Removing perfluorooctane sulfonate and perfluorooctanoic acid from solid matrices, paper, fabrics, and sand by mineral acid suppression and supercritical carbon dioxide extraction

The removal of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS) from solid matrices has received considerable attention because of the environmental persistence, bioaccumulation, and potential toxicity of these compounds. This study presents a simple method using concentrated HNO₃ as a suppression agent, and methanol-modified supercritical carbon dioxide (Sc-CO₂) extraction for removing PFOS and PFOA from solid matrices. The optimal conditions were 16 M HNO₃ and 20% (v/v) methanol containing Sc-CO₂, under a pressure of 20.3 MPa and a temperature of 50 °C. Extraction time was set at 70 min (40 min for static and 30 min for dynamic extraction). PFOA and PFOS were identified and quantitated by liquid chromatography/mass spectrometry. The extraction efficiencies (with double extractions) were close to 100% for PFOA and 80% for PFOS for both paper and fabric matrices. The extraction efficiencies for sand were approximately 77% for PFOA and 59% for PFOS. The results show that this method is accurate, and effective, and that it provides a promising and convenient approach to remediate the environment of hazardous PFOA and PFOS contamination.     

Effect of metal chlorides on thermal degradation of (waste) polycarbonate

In this study, we investigated how to treat (waste) polycarbonate efficiently to reduce its degraded residue. The study was carried out in an isothermal reactor under continuous nitrogen flow at atmospheric pressure to pyrolyze polycarbonate (PC) alone and in the presence of metal chloride. Some metal chlorides were shown to be catalytic active for the degradation of PC at 400 degrees C, which increased degradation conversion from 8.5% to more than 58.3%. Among those active metal chlorides, ZnCl2 and SnCl2 can produce higher liquid product yields. Effects such as particle size of PC, temperature, the weight ratio of metal chloride/PC, and degradation time on the degradation conversion of PC without and with these two most active metal chlorides were studied. Results of the liquid product analysis by GC/MS demonstrated the product composition of PC degradation over the metal chlorides is much simpler than that of degradation alone. The main liquid product is phenol, p-isopropylphenol, diphenyl carbonate, and bisphenol A for all cases.     

Decoupling analysis of water consumption and economic development of arid and semiarid regions in Northwest China

The contradiction between China's economic development, its need for resources and the protection of the environment is ctitical. Scarce water resources have resulted in a considerable bottleneck restricting the economic development of water-deficient areas. An objective evaluation of the decoupling state of water consumption and economic development has become an important indicator of regional economic sustainable development. Based on panel data from 2000 to 2017 for six provinces in the arid and semiarid regions of Northwest China, the Logarithmic Mean Divisia Index method is employed to decompose the factors of the decoupling index and establish a decoupling relationship model between water consumption and economic development. The reasons that affect the decoupling state of water resource utilization and economic development are herein discussed, and the stability of the decoupling trend is analysed. Based on the overall regional trend, the decoupling state of the arid and semiarid regions in Northwest China improved from weak to strong, but the high decoupling stability index varied among the provinces. The intensity and structure were promotional factors for decoupling water consumption and economic development, and the contribution rate of the intensity factor was higher than that of the structure factor. Income and population were inhibiting factors for decoupling water consumption and economic development, and the contribution rate of the income factor was higher than that of the population factor. Based on these results, corresponding policy recommendations are provided.     

Distributive and procedural justice as predictors of employee outcomes in Hong Kong

This study examines the extent to which employee judgments about distributive and procedural justice predict job satisfaction, intent to stay and evaluation of supervision in Hong Kong. Distributive and procedural justice each plays a role in determining work outcomes of Hong Kong employees. However, some effects of these justice variables differ from results of previous studies in the United States (U.S.). First, in previous U.S. studies, procedural justice moderates the relationship of distributive justice with evaluation of supervision, but not with job satisfaction or intent to stay. For Hong Kong employees, procedural justice moderates the effects of distributive justice on job satisfaction and intent to stay, but not on evaluation of supervision. Second, previous U.S. studies have shown that procedural justice has a larger effect on work outcomes for women, while distributive justice has larger effects on outcomes for men. For Hong Kong employees, the effects of procedural and distributive justice are about the same for men and women. Differences in the effects of distributive and procedural justice between Hong Kong and the U.S. may reflect cultural dimensions, such as collectivism/individualism and power distance, as well as the relative availability of rewards for women in the work force. Practical implications and future research directions are discussed. Copyright © 2000 John Wiley & Sons, Ltd.     

Influence of vertical greening design of building opening on indoor cooling and ventilation

This study focused on greening designs for building openings. Field experimentation was conducted and Computational Fluid Dynamics (CFD) software was used for simulation in order to analyze the influence of different greening design modes on indoor temperature. A greening design mode suitable for the opening of houses in Kaohsiung was proposed. This study took an architectural space with a pitched roof as the experimental site, where the main variable was the location of the plant facade outside the opening, and the distance between the plant and wall surface, as well as the number of plant layers, was the control variable. A plant (Rose of China) was selected for experimentation, and the indoor temperature distributions under various research module settings were discussed by numerical simulation. The conclusions are described, as follows: (1) The air temperature would be affected by the plants, and the indoor air temperature is reduced (over 0.5°C without direct sunshine in this study). (The difference between the indoor cooling effects with and without plants was 0.89~1.11°C. (2) While the cooling effect of the double-layer plant on indoor air temperature was better than a single-layer plant, the difference was limited and not proportional. (3) The plants should be located as close to the opening as possible, and be arranged partially sparse and partially dense. (4) When the outside wind speed is low, plant greening is highly recommended for cooling.