Emergy-based fuzzy optimization approach for water reuse in an eco-industrial park

The establishment of an eco-industrial park (EIP) provides opportunity for individual plants to cooperate with each other in order to utilize resources efficiently and thus reduce waste. The goal of an EIP is to “close the loop” through recycling and reuse of material and energy streams. Studies show with current freshwater consumption trends there would be water stress aggravated by global warming in the near future. This paper presents a model to design an EIP water reuse network that considers overall system sustainability as measured with emergy, as well as cost saving desired by individual plants. Case studies from literature are then solved to illustrate the advantage of this method in decision making. The illustrative examples show how the model achieves a compromise among the potentially conflicting fuzzy goals of the various EIP stakeholders.     

Introduction to the special issue on Advances in Life-Cycle Approachesto Business and Resource Management in the Asia-Pacific Region

This special issue of the Journal of Cleaner Production was initiated as a result of the 5th and 6th meetings of the Asia Pacific Roundtable for Sustainable Consumption and Production (APRSCP), which were held in Melbourne, Australia and Hanoi, Vietnam, respectively. A need identified at those meetings was to create another means of communicating the best ideas and papers being presented, to a wider audience. The Asia Pacific region has special development needs given its rapid emergence as a global production hub, but coupled to that are also the rapid social adjustments and shifts in patterns of consumption and production which aren't positive for the environment. This special issue contains eight papers covering the implementation of cleaner production and life cycle principles at the systems and regional planning level. These articles cover urban development, corporate CP programs, supply chain management, eco-industrial networks, and industrial parks, recycling, and understanding the role of human factors in bringing about environmental change.     

Availability and immobilization of 137Cs in subtropical high mountain forest and grassland soils

To understand the behavior of (137)Cs in undisturbed soils after nuclear fallout deposition between the 1940s and 1980s, we investigated the speciation of (137)Cs in soils in forest and its adjacent grassland from a volcano and subalpine area in Taiwan. We performed sequential extraction of (137)Cs (i.e., fractions readily exchangeable, bound to microbial biomass, bound to Fe-Mn oxides, bound to organic matter, persistently bound and residual). For both the forest and grassland soils, (137)Cs was mainly present in the persistently bound (31-41%) and residual (22-62%) fractions. The proportions of (137)Cs labile fractions--bound to exchangeable sites, microbial biomass, Mn-Fe oxides, and organic matter--were lower than those of the recalcitrant fractions. The labile fractions in the forest soils were also higher than those in the grassland soils, especially in the volcanic soil. The results suggest that the labile form of (137)Cs was mostly transferred to the persistently bound and resistant fractions after long-term deposition of fallout. The readily exchangeable (137)Cs fraction was higher in soils with higher organic matter content or minor amounts of 2:1 silicate clay minerals.     

Full-scale experimental studies for backdraft using solid materials

The backdraft experiments involved three full-scale room fire tests that used solid furnishing, loveseats. From experimental data, a backdraft caused two temperature peaks. The first one was below 600 °C. Then, an abrupt opening of the front door led to a supply of a large amount of fresh air, followed by an indication of sudden temperature rise. The second peak temperature was over 600 °C. Meanwhile, the deflagration resulted in the gases heating and expanding within the fire space, thus forcing unburned gases out of the vent ahead of the flame front. Comparing both cases with natural gas and solid loveseat as the fuel in backdraft, the former can achieve pre-mixture state and readily create an instant explosion wave phenomenon; however, this wave disappeared immediately. On the other hand, the solid loveseat used as the fuel in this study produced backdraft within 30–50 s after opening of the door. After the occurrence of backdraft, fire maintained a period of fully developed stage, which was consistent with the conditions in actual fires.     

Enhanced biodegradation of azo dyes using an integrated elemental iron-activated sludge system: I. Evaluation of system performance.

The objective of this research is to evaluate an integrated system coupling zero-valent iron (Fe(0)) and aerobic biological oxidation for the treatment of azo dye wastewater. Zero-valent (elemental) iron can reduce the azo bond, cleaving dye molecules into products that are more amenable to aerobic biological treatment processes. Azo dye reduction products, including aniline and sulfanilic acid, were shown to be readily biodegradable at concentrations up to approximately 25 mg/L. Batch reduction and biodegradation data support the proposed integrated iron pretreatment and activated sludge process for the degradation of the azo dyes orange G and orange I. The integrated system was able to decolorize dye solutions and yield effluents with lower total organic carbon concentrations than control systems without iron pretreatment. The success of the bench-scale integrated system suggests that iron pretreatment may be a feasible approach to treat azo dye containing wastewaters.     

Analysis of polycyclic aromatic hydrocarbons in sediment reference materials by microwave-assisted extraction

The microwave-assisted extraction (MAE) of polycyclic aromatic hydrocarbons (PAHs) from harbor sediment reference material EC-1, marine sediment reference material HS-2 and PAH-spiked river bed soil was conducted. The extraction conditions for EC-1 were carried out at 70 degrees C and 100 degrees C under pressure in closed vessels with cyclohexane acetone (1:1), cyclohexane-water (3:1), hexane acetone (1:1), and hexane-water (3:1) for 10 min. A comparison between MAE and a 16-h Soxhlet extraction (SX) method showed that both techniques gave comparable results with certified values. MAE has advantages over the currently used Soxhlet technique due to a faster extraction time and lower quantity of solvent used. The consumption of organic solvent of the microwave method was less than one-tenth compared to Soxhlet.     

Dechlorination pathways of ortho-substituted PCBs by UV irradiation in n-hexane and their correlation to the charge distribution on carbon atom

The photodegradations of 22 individual polychlorinated biphenyl (PCB) congeners (including 21 non-coplanar ortho substituted and one non-ortho substituted) by irradiation with ultraviolet lamp in n-hexane solution were studied. Photoproducts were identified by matching their retention times and mass spectra with those of authentic standards. PCB congener with less than two chlorides was photodegraded within half an hour, if more than three chlorine on ring, the photodechlorination time for PCB needs one and half hours or more, sometimes even longer than 15 h. The half-life of PCB degradation by photodechlorination was much shorter than that by anaerobic biological dechlorination. Charge distribution on carbon atom combined with the monitoring products of individual PCB congeners were used to deduce the photodegradation pathways. The higher the charge distribution for carbon to which chlorine is attached, the easier for photodechlorination to occur. A lot of chlorine atoms attached PCB, the dechlorination was found to occur prior to the carbon with higher charge distribution at the benzene ring with more chlorine atoms attached.     

Sludge-grown algae for culturing aquatic organisms: Part I. Algal growth in sludge extracts

This project is aimed at studying the feasibility of using sewage sludge to prepare culture media for microalgae (Chlorella-HKBU) and the use of the sludge-grown algae as a feed for some aquatic organisms. Part I of the project included results on preparing sludge extracts and their use on algal culture. By comparing two culturing techniques, aeration and shaking, it was noted that both lag and log phases were shortened in the aeration system. A subsequent experiment noted that algal growth subject to aeration rates of 1.0 and 1.5 liters/min had similar lag and log phases. In addition, both aeration rates had a significantly higher (P < 0.05) final cell density than that of 0.5 liters/min. A detailed study on the variation of growth conditions on the algal growth was done. The results indicated that pH values of all the cultures declined below 5 at day 12. The removal rates of ammonia N ranged from 62% to 70%. The sludge-grown algae contained a rather substantial amount of heavy metals (µg/g): Zn 289–581, Cu 443–682, Ni 310–963, Mn 96–126, Cr 25–118, and Fe 438–653. This implied that the rather high levels of heavy metals may impose adverse effects on higher trophic organisms.