Investigation of sources of atmospheric aerosol at a hot spot area in Dhaka, Bangladesh

Samples of fine and coarse fractions of airborne particulate matter were collected at the Farm Gate area in Dhaka from July 2001 to March 2002. Dhaka is a hot spot area with very high pollutant concentrations because of the proximity of major roadways. The samples were collected using a "Gent" stacked filter unit in two fractions of 0- to 2.2-microm and 2.2- to 10-microm sizes. The samples were analyzed for elemental concentrations by particle-induced X-ray excitation (PIXE) and for black carbon by reflectivity methods, respectively. The data were analyzed by positive matrix factorization (PMF) to identify the possible sources of atmospheric aerosols in this area. Six sources were found for both the coarse and fine PM fractions. The data sets were also analyzed by an expanded model to explore additional sources. Seven and six factors were obtained for coarse and fine PM fractions, respectively, in these analyses. The identified sources are motor vehicle, soil dust, emissions from construction activities, sea salt, biomass burning/brick kiln, resuspended/fugitive Pb, and two-stroke engines. From the expanded modeling, approximately 50% of the total PM2.2 mass can be attributed to motor vehicles, including two-stroke engine vehicle in this hot spot in Dhaka, whereas the PMF modeling indicates that 45% of the total PM2.2 mass is from motor vehicles. The PMF2 and expanded models could resolve approximately 4% and 3% of the total PM2.2 mass as resuspended/fugitive Pb, respectively. Although, Pb has been eliminated from gasoline in Bangladesh since July 1999, there still may be substantial amounts of accumulated lead in the dust near roadways as well as fugitive Pb emissions from battery reclaimation and other industries. Soil dust is the largest component of the coarse particle fraction (PM2.2-10) accounting for approximately 71% of the total PM2.2-10 mass in the expanded model, whereas from the PMF modeling, the dust (undifferentiated) contribution is approximately 49%.     

SOCIO-ECONOMIC CONSIDERATIONS IN WATER RESOURCES PLANNING1

Historically, the main objective of water resources development has been economic efficiency, and the technique for its evaluation has been benefit-cost analysis. Gradually other objectives have emerged, and these in order of their emergence are regional income redistribution, environmental quality and social well-being. These multi-objectives have given rise to multifarious problems, and have made the planning process much more complex than ever before. The different objectives are not mutually exclusive, and, hence, contributions to one can only be made at the expense of others. Trade-off studies between different objectives are difficult to make. It is suggested that one way to overcome this difficulty could be to design a system to perform optimally in terms of one objective, subject to a specified level of performance of the other, which in effect becomes a constraint. The paper also discusses the pros and cons of the desirability of public participation in our decision-making processes, and the necessity of developing social sciences models to aid water planning and management.     

Concentration gradient patterns of aerosol particles near interstate highways in the Greater Cincinnati airshed

The objective of this study was to determine if there is an exposure gradient in particulate matter concentrations for people living near interstate highways, and to determine how far from the highway the gradient extends. Air samples were collected in a residential area of Greater Cincinnati in the vicinity of two major highways. The measurements were conducted at different distances from the highways by using ultrafine particle counters (measurement range: 0.02-1 microm), optical particle counters (0.3-20 microm), and PM2.5 Harvard Impactors (0.02-2.5 microm). The collected PM2.5 samples were analyzed for mass concentration, for elemental and organic carbon, and for elemental concentrations. The results show that the aerosol concentration gradient was most clearly seen in the particle number concentration measured by the ultrafine particle counters. The concentration of ultrafine particles decreased to half between the sampling points located at 50 m and 150 m downwind from the highway. Additionally, elemental analysis revealed a gradient in sulfur concentrations up to 400 m from the highway in a residential area that does not have major nearby industrial sources. This gradient was qualitatively attributed to the sulfate particle emissions from diesel engine exhausts, and was supported by the concentration data on several key elements indicative of traffic sources (road dust and diesel exhaust). As different particulate components gave different profiles of the diesel exposure gradient, these results indicate that no single element or component of diesel exhaust can be used as a surrogate for diesel exposure, but more comprehensive signature analysis is needed. This characterization is crucial especially when the exposure data are to be used in epidemiological studies.     

Inactivation of enzyme laccase and role of cosubstrate oxygen in enzymatic removal of phenol from water.

Research was conducted to evaluate the potential use of laccase and its susceptibility to inactivation in an alternative enzyme-based treatment technology to remove parent phenol from buffered distilled water. Enzymatic oxidative polymerization of phenol with laccase was carried out in continuously stirred batch reactors. The reaction products were insoluble polymers, which precipitated out of the solution once their solubility limits were exceeded. The findings demonstrated that the polymeric products had significant effects on enzyme activity consumption and subsequent phenol removal. Enzyme species present in the reaction vessel were classified into enzyme remaining in the solution (type 1) and enzyme adhering to the precipitate polymers (type 2). Type 1 enzyme was more efficient in removal of phenol from solution compared with type 2. Subsequent filtration enhanced the phenol removal by removing type 2 enzyme adhering to the polymer particles and decelerating enzyme inactivation. The study also investigated the effects of available dissolved oxygen, provided through aeration and hydrogen peroxide addition, on phenol removal. Aeration and hydrogen peroxide addition increased the dissolved oxygen concentration, but had no effect on the progress curve for phenol removal.     

Species-level study on arsenic availability from dietary components

Arsenic (As) contaminated water and foodstuffs are of major concern. Samples of drinking–cooking water (n = 50), raw rice (n = 50), common vegetables (eight types), and common pulses (three types) were collected from households in the endemic region. The study found up to 70% As reduction by using safe water for cooking of rice and vegetables. Speciation study reflected more arsenate than arsenite and other organic arsenicals in all the types of samples. Male intake of 293 μg As through drinking water contained 38 μg arsenite and 246 μg arsenate, and female intake of 199 μg As contained 167 μg arsenate and 25 μg arsenite. In cooked rice, 108 μg As contained 69 μg arsenate and 17 μg arsenite with 9 μg dimethylarsonic acid (DMA). Total As consumption from cooked vegetables was 45 μg with 34 and 4 μg of arsenite and arsenate, respectively, and 5 μg of DMA. Data indicate that cooking with As-free water removes arsenic in already contaminated foodstuffs but without interconversion of the As species, from toxic inorganic to less toxic organic forms.