Critical technical elements of state bioassessment programs: a process to evaluate program rigor and comparability

We developed a systematic process to evaluate state/tribal bioassessment programs to provide information about the rigor of the technical approach. This is accomplished via on-site interviews to produce an evaluation that assigns one of four levels of rigor as an outcome. Level 4 is the most rigorous and reflects a technical capacity to accurately determine incremental condition and support management programs. The remaining three levels are less able to assess incremental condition and are appropriate for only some management support needs. Accurately determining impairment and diagnosing pollution-specific stressors are fundamental tasks that states/tribes must accomplish to provide management support. This goal is fulfilled to varying degrees by most states/tribes. The evaluation employs a checklist and a sliding scale of rigor for 13 technical elements. Feedback is provided to each state/tribe via a technical memorandum that describes the technical components of the monitoring program, highlights strengths, and recommends improvements for specific technical issues. This can be used to refine the bioassessment and monitoring programs to better support management programs. The results of 14 state/tribal evaluations are included here. The majority (nine states, one tribe) revealed that most operate at level 2 with developmental activities that will elevate the level of program rigor already underway. Two states operate level 4 programs and each have numeric biocriteria and refined designated uses in their water quality standards. This is the ultimate goal of the process of engaging states in the development of bioassessment programs in the U.S.     

Investigating Jacaranda mimosifolia tree as biomonitor of atmospheric trace metals

Studies on the use of tree bark as biomonitors for environmental pollutants are still very scarce. We evaluated the reliability of using Jacaranda mimosifolia, a common tree in Tshwane City of South Africa, as a suitable biomonitor of atmospheric trace metals. Bark samples were collected from ten different locations during two sampling periods. The concentrations of the metals were determined by inductively coupled plasma mass spectrometry. The concentrations of the metals were 33.2–1,795 μg/g (Pb), 21.4–210 μg/g (Cu), 68.4–490 μg/g (Zn), 30.6–2,916 μg/g (Cr), 0.12–1.34 μg/g (Cd), and 6.04–68.0 μg/g (V), respectively. The differences obtained for the results from different sites were significant (p?< 0.05). A significant difference was also observed between the two sampling periods. The trace metals concentrations suggested that automobile emissions are a major source of these metals. The study also confirms the suitability of J. mimosifolia as a biomonitor of atmospheric deposition of these metals.     

Characterizing the forest fragmentation of Canada’s national parks

Characterizing the amount and configuration of forests can provide insights into habitat quality, biodiversity, and land use. The establishment of protected areas can be a mechanism for maintaining large, contiguous areas of forests, and the loss and fragmentation of forest habitat is a potential threat to Canada’s national park system. Using the Earth Observation for Sustainable Development of Forests (EOSD) land cover product (EOSD LC 2000), we characterize the circa 2000 forest patterns in 26 of Canada’s national parks and compare these to forest patterns in the ecological units surrounding these parks, referred to as the greater park ecosystem (GPE). Five landscape pattern metrics were analyzed: number of forest patches, mean forest patch size (hectare), standard deviation of forest patch size (hectare), mean forest patch perimeter-to-area ratio (meters per hectare), and edge density of forest patches (meters per hectare). An assumption is often made that forests within park boundaries are less fragmented than the surrounding GPE, as indicated by fewer forest patches, a larger mean forest patch size, less variability in forest patch size, a lower perimeter-to-area ratio, and lower forest edge density. Of the 26 national parks we analyzed, 58% had significantly fewer patches, 46% had a significantly larger mean forest patch size (23% were not significantly different), and 46% had a significantly smaller standard deviation of forest patch size (31% were not significantly different), relative to their GPEs. For forest patch perimeter-to-area ratio and forest edge density, equal proportions of parks had values that were significantly larger or smaller than their respective GPEs and no clear trend emerged. In summary, all the national parks we analyzed, with the exception of the Georgian Bay Islands, were found to be significantly different from their corresponding GPE for at least one of the five metrics assessed, and 50% of the 26 parks were significantly different from their respective GPEs for all of the metrics assessed. The EOSD LC 2000 provides a heretofore unavailable dataset for characterizing broad trends in forest fragmentation in Canada’s national parks and in their surrounding GPEs. The interpretation of forest fragmentation metrics must be guided by the underlying land cover context, as many forested ecosystems in Canada are naturally fragmented due to wetlands and topography. Furthermore, interpretation must also consider the management context, as some parks are designed to preserve fragmented habitats. An analysis of forest pattern such as that described herein provides a baseline, from which changes in fragmentation patterns over time could be monitored, enabled by earth observation data.     

Determination of some organochlorine pesticide residues in honeys from Konya, Turkey

In this study, 24 organochlorine pesticide residues in 109 different honey samples collected from stores and open markets in Konya, Turkey were analyzed by gas chromatography-electron capture detection. Aldrin, cis-chlordane, trans-chlordane, oxy-chlordane, 2,4^′ -DDE, and 4,4^′ -DDE were found in all honey samples. The mean value was 0.0540 μg g^???1 for oxy-chlordane. In the 55 samples of 109, levels of organochlorine pesticide residues of oxy-chlordane were determined as higher than those of Turkish Alimentarius Codex maximum residual limits (MRLs). Other organochlorine pesticide residues also exceeded MRLs except for cis-heptachlor epoxide and α-hexachlorocyclohexane. Since all of the honey samples are found contaminated and most of these samples exceeded MRLs, a control of organochlorine pesticide residues in honey is necessary for consumer health.     

Bacteria with dual resistance to elevated concentrations of heavy metals and antibiotics in Nigerian contaminated systems

Samples of soil, water, and sediments from industrial estates in Lagos were collected and analyzed for heavy metals and physicochemical composition. Bacteria that are resistant to elevated concentrations of metals (Cd^2?+?, Co^2?+?, Ni^2?+?, Cr^6?+?, and Hg^2?+?) were isolated from the samples, and they were further screened for antibiotic sensitivity. The minimum tolerance concentrations (MTCs) of the isolates with dual resistance to the metals were determined. The physicochemistry of all the samples indicated were heavily polluted. Twenty-two of the 270 bacterial strains isolated showed dual resistances to antibiotics and heavy metals. The MTCs of isolates to the metals were 14 mM for Cd^2?+?, 15 mM for Co^2?+? and Ni^2?+?, 17 mM for Cr^6?+?, and 10 mM for Hg^2?+?. Five strains (Pseudomonas aeruginosa, Actinomyces turicensis, Acinetobacter junni, Nocardia sp., and Micrococcus sp.) resisted all the 18 antibiotics tested. Whereas Rhodococcus sp. and Micrococcus sp. resisted 15 mM Ni^2?+?, P. aeruginosa resisted 10 mM Co^2?+?. To our knowledge, there has not been any report of bacterial strains resisting such high doses of metals coupled with wide range of antibiotics. Therefore, dual expressions of antibiotics and heavy-metal resistance make the isolates, potential seeds for decommissioning of sites polluted with industrial effluents rich in heavy metals, since the bacteria will be able to withstand in situ antibiosis that may prevail in such ecosystems.     

Valorization of post-consumer waste plastic in cementitious concrete composites

The sheer amount of disposable bottles being produced nowadays makes it imperative to identify alternative procedures for recycling them since they are non-biodegradable. This paper describes an innovative use of consumed plastic bottle waste as sand-substitution aggregate within composite materials for building application. Particularly, bottles made of polyethylene terephthalate (PET) have been used as partial and complete substitutes for sand in concrete composites. Various volume fractions of sand varying from 2% to 100% were substituted by the same volume of granulated plastic, and various sizes of PET aggregates were used. The bulk density and mechanical characteristics of the composites produced were evaluated. To study the relationship between mechanical properties and composite microstructure, scanning electron microscopy technique was employed. The results presented show that substituting sand at a level below 50% by volume with granulated PET, whose upper granular limit equals 5mm, affects neither the compressive strength nor the flexural strength of composites. This study demonstrates that plastic bottles shredded into small PET particles may be used successfully as sand-substitution aggregates in cementitious concrete composites. These new composites would appear to offer an attractive low-cost material with consistent properties; moreover, they would help in resolving some of the solid waste problems created by plastics production and in saving energy.     

Pyrolysis of mixtures of sewage sludge and manure: a comparison of the results obtained in the laboratory (semi-pilot) and in a pilot plant

A pilot-scale pyrolysis process was carried out for the treatment of a mixture of two types of waste, sewage sludge and cattle manure, comparing the results with others obtained under laboratory conditions (semi-pilot scale). The aim of this study was to obtain the energetic valorization of the products. Owing to the specific characteristics of the plant, two products were obtained from the process: gas and carbonized solid. As no liquid fraction was obtained, the gas fraction is a greater percentage made up of both condensable and non-condensable compounds, which were obtained separately at the laboratory scale. The pilot plant was designed so that the gases produced by thermolysis were burnt continuously in a combustion chamber, while the carbonized fraction was fed in batches for co-combustion. To determine composition and combustion ability, the gas and solid products from the pilot process were characterized by chromatographic analysis of the gaseous fraction and chemical analysis and programmed-temperature combustion of the carbonized solid. The composition of the combustion gases, rich in light hydrocarbons, and the carbon present in the carbonized fraction enable the energetic valorization of these products. The combustion gases were subjected to a cleaning process and their composition analysed twice: before and after the gas cleaning treatment. The study led to a positive assessment of the possible use of the process products as fuel, provided that the combustion gases are treated. As most of the sulphur and chlorine from the original waste are mainly concentrated in the solid fraction, the use of char as a fuel will depend on the effectiveness of clean-up techniques for combustion gases. During gas cleansing, neutralizing with sodium bicarbonate proved effective, especially for the acidic compounds HCl, HF and SO(2).     

Estimating pesticide runoff in small streams

Surface runoff is one of the most important pathways for pesticides to enter surface waters. Mathematical models are employed to characterize its spatio-temporal variability within landscapes, but they must be simple owing to the limited availability and low resolution of data at this scale. This study aimed to validate a simplified spatially-explicit model that is developed for the regional scale to calculate the runoff potential (RP). The RP is a generic indicator of the magnitude of pesticide inputs into streams via runoff. The underlying runoff model considers key environmental factors affecting runoff (precipitation, topography, land use, and soil characteristics), but predicts losses of a generic substance instead of any one pesticide. We predicted and evaluated RP for 20 small streams. RP input data were extracted from governmental databases. Pesticide measurements from a triennial study were used for validation. Measured pesticide concentrations were standardized by the applied mass per catchment and the water solubility of the relevant compounds. The maximum standardized concentration per site and year (runoff loss, R_Loss) provided a generalized measure of observed pesticide inputs into the streams. Average RP explained 75% (p < 0.001) of the variance in R_Loss. Our results imply that the generic indicator can give an adequate estimate of runoff inputs into small streams, wherever data of similar resolution are available. Therefore, we suggest RP for a first quick and cost-effective location of potential runoff hot spots at the landscape level.     

Adsorption of natural organic matter from waters by iron coated pumice

Natural pumice particles were used as granular support media and coated with iron oxides to investigate their adsorptive natural organic matter (NOM) removal from waters. The impacts of natural pumice source, particle size fraction, pumice dose, pumice surface chemistry and specific surface area, and NOM source on the ultimate extent and rate of NOM removal were studied. All adsorption isotherm experiments were conducted employing the variable-dose completely mixed batch reactor bottle-point method. Iron oxide coating overwhelmed the surface electrical properties of the underlying pumice particles. Surface areas as high as 20.6m(2)g(-1) were achieved after iron coating of pumice samples, which are above than those of iron coated sand samples reported in the literature. For all particle size fractions, iron coating of natural pumices significantly increased their NOM uptakes both on an adsorbent mass- and surface area-basis. The smallest size fractions (<63 microm) of coated pumices generally exhibited the highest NOM uptakes. A strong linear correlation between the iron contents of coated pumices and their Freundlich affinity parameters (K(F)) indicated that the enhanced NOM uptake is due to iron oxides bound on pumice surfaces. Iron oxide coated pumice surfaces preferentially removed high UV-absorbing fractions of NOM, with UV absorbance reductions up to 90%. Control experiments indicated that iron oxide species bound on pumice surfaces are stable, and potential iron release to the solution is not a concern at pH values of typical natural waters. Based on high NOM adsorption capacities, iron oxide coated pumice may be a promising novel adsorbent in removing NOM from waters. Furthermore, due to preferential removal of high UV-absorbing NOM fractions, iron oxide coated pumice may also be effective in controlling the formation of disinfection by-products in drinking water treatment.     

The influence of radical architecture on cadmium bioaccumulation in the black mangrove, Avicennia germinans L

Two groups of Avicennia germinans plants with differences in the radical architecture were exposed under hydroponic conditions to 95ppm of cadmium (Cd) for a period of 24h. Later, Cd concentration in roots, stems and leaves was determined by graphite furnace atomic absorption spectrophotometry. Our results showed that, for both groups of plants, the roots accumulated higher concentration of Cd as compared to stems and leaves, though, the plants of group B displayed enhanced radical architecture, better growth performance, and lower Cd concentration as compared to plants of group A. In contrast, low values of leaves/roots Cd transportation index, and bioaccumulation factor were found in plants of group B. These results suggest that the higher radical architecture developed in plants of group B might better adjust the uptake of Cd as a result of an integrated network of multiple response processes for instances, production of organic acids, antioxidative replay, cell-wall lignification and/or suberization. Further studies will be focused in understanding the role of the radical system in mangrove plants with the rhizosphere activation and root adsorption to soil Cd under natural conditions.