Catalyst deterioration over the lifetime of small utility engines

In this paper, the deterioration of catalysts in small, four-stroke, spark-ignition engines is described. The laboratory testing performed followed a proven test method that mimics the lifetime of a small air-cooled utility engine operating under normal field conditions. The engines used were single-cylinder, 6.5-hp, side-valve engines. These engines have a nominal 125-hr lifetime. The effectiveness of the catalysts was determined by testing exhaust emissions before and after the catalyst to determine the catalyst's efficiency. This was done several times during the lifetime of the engines to determine the deterioration in the performance of the catalysts at lowering pollutant emissions. Additional testing was performed on the catalysts to determine wear patterns, contamination, and recoverable activity. The results indicate that considerable catalyst deterioration is occurring over the lifetime of the engine. The results reveal that soot buildup, poisons, and active surface loss appear to be the contributing factors to the deterioration. These results were determined after analyzing the exhaust emissions data, scanning electron microscope results analysis, and the impact of regeneration attempts. An ANOVA statistical analysis was performed, and it was determined that the emissions are also impacted, to some degree, by time and the engine itself.     

Effective elution of RDX and TNT from particles of Comp B in surface soil

During live fire training exercises, large amounts of explosives are consumed. Low order detonations of high explosive payloads result in the patchy dispersal of particles of high explosive formulations over large areas of firing range soils. Dissolution of explosives from explosive formulation particles into soil pore water is a controlling factor for transport, fate, and effects of explosive compounds. We developed an empirical method to evaluate soils based on functionally defined effective dissolution rates. An automated Accelerated Solvent Extractor was used to determine the effective elution rates under controlled conditions of RDX and TNT from soil columns containing particles of Comp B. Contrived soils containing selected soil geosorbants and reactive surfaces were used to quantitatively determine the importance of these materials. Natural soils from training ranges of various soil types were also evaluated. The effects of geosorbants on effective elution rates were compound- and sorbent-specific. TNT elution was less than that of RDX and was greatly slowed by humic acid. Iron and iron-bearing clays reduced the effective elution rates of both RDX and TNT. This empirical method is a useful tool for directly generating data on the potential for explosives to leach from firing range soils, to identify general bulk soil characteristics that can be used to predict the potential, and to identify means to engineer soil treatments to mitigate potential transport.     

Perceived support in a dual organizational environment: Union participation in a university setting

There is extensive research on employee attitudes regarding employers and unions, but these studies have underemphasized social and affective forces. Most studies also examine attitudes toward either the union or the employer without considering how these attitudes might relate to one another. The present study of faculty (N = 306) at a large public research university demonstrated that perceptions of union support were positively related to union participation and perceptions of administration support were negatively related to union participation. Subjective norms and general union attitudes were related to perceptions of union support, and subjective norms were related to perceived organizational support. Taken together, an individual's participation in a union recognition effort depends not only on union instrumentality, but also upon social relationships with the union and administration. Copyright © 2009 John Wiley & Sons, Ltd.     

Migrating an incident reporting system to a CCPS process safety metrics model

A major chemical company established a formal incident investigation and reporting system several years ago. The original system focused heavily on worker-related injuries, illnesses, and near-misses and was used primarily to track statistics reportable to the Occupational Safety and Health Administration (OSHA). This Occupational Injury and Illness (OII) approach has been recognized to be an ineffective tool for measuring, predicting, and preventing process safety incidents. The Center for Chemical Process Safety (CCPS) recently published guidelines on how to establish safety metrics for the measurement and reduction of process safety incidents. The process safety metrics approach relies upon leading and lagging metrics to improve organization process safety. This paper is a case study of the analysis of one organization’s incident database, which represents approximately five years of data from over a dozen facilities. The aim of this investigation was to extract useful process safety metrics from the incident investigation and reporting system, which would be pertinent to the types of process units and process functions at these facilities. This paper will discuss the approach taken to extract process incident information from an OII-based database and present the difficulties of performing an analysis on such a database. This paper provides guidance on how to migrate an existing OII-based reporting system to a program that includes process safety metrics in accordance with industry best practices.     

Highlights of LNG risk technology

The authors have recently undertaken a major review of LNG consequence modeling, compiling a wide range of historical information with more recent experiments and modeling approaches in a book entitled “LNG Risk-Based Safety: Modeling and Consequence Analysis”. All the main consequence routes were reviewed – discharge, evaporation, pool and jet fire, vapor cloud explosions, rollover, and Rapid Phase Transitions (RPT’s). In the book, experimental data bases are assembled for tests on pool spread and evaporation, burn rates, dispersion, fire and radiation and effects on personnel and structures. The current paper presents selected highlights of interest: lessons learned from historical development and experience, comparison of predictions by various models, varying mechanisms for LNG spread of water, a modeling protocol to enable acceptance of newer models, and unresolved technical issues such as cascading failures, fire engulfment of a carrier, the circumstances for a possible LNG BLEVE, and accelerated evaporation by LNG penetration into water.     

Application of slipstreamed air pollution control devices on waste-as-fuel processes

The recovery of energy from the combustion of municipal solid wastes is becoming an attractive alternative as landfill space becomes scarce and the availability of fossil fuels decreases. Particulate emissions from “waste-as-fuel” processes, however, may differ significantly in chemical and physical properties from particulate emissions produced by firing only coal. Such differences can affect the design and operation of air pollution control equipment. Presented in this paper are the results of a 2-month test program at Ames, Iowa, with a mobile electrostatic precipitator (ESP) and a mobile scrubber supplied by the U.S. Environmental Protection Agency (EPA), Industrial Environmental Research Laboratory (IERL), Research Triangle Park. PEDCo Environmental, Inc., and Acurex Corporation jointly conducted the test program to examine the effect of burning refuse-derived fuel (RDF) on particulate and heavy metal control efficiencies. The mobile ESP was used only as a primary control device, whereas the mobile scrubber was tested both upstream and downstream of the existing full-scale ESP. This paper also presents a status report on a PEDCo test program with a pilot fabric filter at Ames.     

High velocity fabric filtration for control of coal-fired boilers

As a follow-up to a pilot study, a full scale investigation of applying high velocity fabric filtration to coal-fired boiler fly ash control was conducted. Two filter systems were separately applied to two 60,000 lb/h coal-fired boilers. Performance evaluations conducted over the course of a year included total mass removal efficiency and fractional efficiencies. One filtration system employed Teflon felt as the filter media while the second system employed Gore-Tex, a Polytetrofluorethylene (PTFE) laminate on PTFE woven backing. During the course of the year, a limited number of glass felt and woven glass bags were introduced into the house containing Gore-Tex. As a separate option, the second system was outfitted entirely with woven glass bags. Preliminary results indicate acceptable performance at air-to-cloth ratio of 6 to 1. Future plans call for utilizing one of the baghouse systems for SO₂ removal.     

Perceived stressors of climate vulnerability across scales in the Savannah zone of Ghana: a participatory approach

Smallholder farmers in sub-Saharan Africa are confronted with climatic and non-climatic stressors. Research attention has focused on climatic stressors, such as rainfall variability, with few empirical studies exploring non-climatic stressors and how these interact with climatic stressors at multiple scales to affect food security and livelihoods. This focus on climatic factors restricts understanding of the combinations of stressors that exacerbate the vulnerability of farming households and hampers the development of holistic climate change adaptation policies. This study addresses this particular research gap by adopting a multi-scale approach to understand how climatic and non-climatic stressors vary, and interact, across three spatial scales (household, community and district levels) to influence livelihood vulnerability of smallholder farming households in the Savannah zone of northern Ghana. This study across three case study villages utilises a series of participatory tools including semi-structured interviews, key informant interviews and focus group discussions. The incidence, importance, severity and overall risk indices for stressors are calculated at the household, community, and district levels. Results show that climatic and non-climatic stressors were perceived differently; yet, there were a number of common stressors including lack of money, high cost of farm inputs, erratic rainfall, cattle destruction of crops, limited access to markets and lack of agricultural equipment that crossed all scales. Results indicate that the gender of respondents influenced the perception and severity assessment of stressors on rural livelihoods at the community level. Findings suggest a mismatch between local and district level priorities that have implications for policy and development of agricultural and related livelihoods in rural communities. Ghana’s climate change adaptation policies need to take a more holistic approach that integrates both climatic and non-climatic factors to ensure policy coherence between national climate adaptation plans and District development plans.