Recovery of NH 4 + by corn cob produced biochars and its potential application as soil conditioner

NH4^＋ ion, a main pollutant in aquatic systems, not only causes eutrophication in rivers and lakes but also contributes to fish toxicity. In this study, an eco-friendly biosorbent was prepared from the pyrolysis of corn cob, a low-cost agricultural residue. The biochars produced by pyrolysis of corn cob at 400℃ and 600℃ were characterized and investigated as adsorbents for NH4＋ -N from an aqueous solution. The biochars were characterized through elemental analysis, Brunauer-Emmett-Teller-N2 surface area analysis, scanning electron microscopy, and Fourier transform infrared spectroscopy. Batch experiments were conducted to investigate the NH4＋ adsorption process of the corn cob biochars. The Freundlich isotherm model fitted the adsorption process better than the Langmuir and Dubinin-Radushkevich isotherm models. Moreover, the adsorption process was well described by a pseudo-second-order kinetic model. Results of thermodynamic analysis suggested that adsorption was a nonspontaneous exothermic process. Biochars produced at 400℃ had higher adsorption capacity than those produced at 600℃ because of the presence of polar functional groups with higher acidity. The exhausted biochar can be potentially used as soil conditioner, which can provide 6.37 kg NH4＋-N-t^-1 （N fertilizer per ton of biochar）.     

Movement patterns of young Caribbean reef sharks, Carcharhinus perezi, at Fernando de Noronha Archipelago, Brazil: the potential of marine protected areas for conservation of a nursery ground

The movement patterns and long-term site-fidelity of primarily juvenile Caribbean reef sharks, Carcharhinus perezi, were investigated using tag-recapture and automated telemetry at an insular nursery area, the Fernando de Noronha Archipelago, Brazil. Of the 143 externally tagged juvenile sharks (<110 cm), 22 (15.3%) were recaptured between 0 and 5 km from the site of tagging after 5–800 days at liberty, suggesting some site-fidelity in young individuals of this species. Site-fidelity and movement patterns of ten juvenile sharks ranging from 78 to 110 cm total length (TL) and one opportunistically captured adult female (224 cm TL) were also investigated for periods of up to 2 years with an array of automated telemetry receivers. Tagging and telemetry data from both inside and outside a marine protected area (MPA) show that shark abundance and activity is greatest along the part of the archipelago’s coastline least disturbed by human activity. Telemetry tracking also showed that juvenile reef sharks demonstrated a high degree of site-fidelity and occupied specific locations along the coast throughout the year, with some evidence of an increase in activity space with ontogeny. Sharks appeared to range more widely at night and there were no seasonal variations in habitat use. Our results suggest that MPAs may be a useful conservation tool to protect young C. perezi and potentially other reef-dwelling carcharhinid sharks during their early life history.     

DDT residue in soil and water in and around abandoned DDT manufacturing factory

Dichlorodiphenyltrichloroethane (DDT) belongs to one of the most hazardous groups of chemicals called persistent organic pollutants. Many organochlorine pesticides including p,p(')-DDT are long lasting due to their non-degradability can travel to distant places and being fat soluble can accumulate in animals and human bodies. Due to the persistent nature of p,p(')-DDT, its adverse environmental and health impacts, the present study was undertaken to examine the residual p,p(')-DDT in and around abandoned p,p(')-DDT manufacturing factory in Amman Gharh, Nowshera, NWFP. Samples of soil, sediments and water were collected in and around the factory area, nearby p,p(')-DDT stores, main factory drain leading to river Kabul and nearby villages. Standard procedures were used for the collection, transportation and storage of samples for analyses. Extraction of each sample for p,p(')-DDT analyses was carried out in triplicates using Soxhelt extraction. p,p(')-DDT contents in the samples were analyzed by capillary GC with electron capture detector. Most of the samples collected up to half kilometer distance from the site of the DDT factory were found contaminated. Further the level of p,p(')-DDT decreased with increasing depth from top to bottom and with distance from the site. The results indicate that there is no immediate threat to underground water reservoirs.     

Fabrication and Characterization of Polyaniline Based Nano-Composite with Their Physico-Chemical and Environmental Applications

A series of organic–inorganic conducting nano polymer-matrix composite cation-exchanger have been synthesized via sol–gel method and characterized through FTIR, XRD, TGA-DTA, SEM, and TEM studies. The structural studies confirm the semi-crystalline nature of the material but the morphology of the exchanger gets changed after incorporation of inorganic moiety. The particle size of the nano-composite was found to be 19.2 nm. The observed band gap for the different samples was found to be in the range of 3.70–4.61 eV which shows that nano-composite material covers semiconducting range but the resistivity of samples is highly dependent on the percentage of inorganic part in the composite. Further the oxidative degradation of the polymer backbone begins after the removal of trapped water successively followed by dopant and low molecular weight oligomers. During the antimicrobial screening, the nano-composite was found to be active against different strains of bacteria and fungi. Gel electrophoresis and molecular docking studies were carried out to check the interaction and mechanism of inhibition of microbial growth, respectively by studying the effect of the nano-composite with DNA-Topoisomerase-1.     

Medium-scale gasification of oil palm empty fruit bunch for power generation

Journal of Material Cycles and Waste Management - This paper focuses on the performance of oil palm empty fruit bunch (EFB) gasification using a medium-scale downdraft gasifier for power...     

Chemical characterization and source apportionment of fine and coarse particulate matter in Lahore,Pakistan

Lahore, Pakistan is an emerging megacity that is heavily polluted with high levels of particle air pollution. In this study, respirable particulate matter (PM_2.5 and PM₁₀) were collected every sixth day in Lahore from 12 January 2007 to 19 January 2008. Ambient aerosol was characterized using well-established chemical methods for mass, organic carbon (OC), elemental carbon (EC), ionic species (sulfate, nitrate, chloride, ammonium, sodium, calcium, and potassium), and organic species. The annual average concentration (±one standard deviation) of PM_2.5 was 194 ± 94 μg m^?3 and PM₁₀ was 336 ± 135 μg m^?3. Coarse aerosol (PM_10?2.5) was dominated by crustal sources like dust (74 ± 16%, annual average ± one standard deviation), whereas fine particles were dominated by carbonaceous aerosol (organic matter and elemental carbon, 61 ± 17%). Organic tracer species were used to identify sources of PM_2.5 OC and chemical mass balance (CMB) modeling was used to estimate relative source contributions. On an annual basis, non-catalyzed motor vehicles accounted for more than half of primary OC (53 ± 19%). Lesser sources included biomass burning (10 ± 5%) and the combined source of diesel engines and residual fuel oil combustion (6 ± 2%). Secondary organic aerosol (SOA) was an important contributor to ambient OC, particularly during the winter when secondary processing of aerosol species during fog episodes was expected. Coal combustion alone contributed a small percentage of organic aerosol (1.9 ± 0.3%), but showed strong linear correlation with unidentified sources of OC that contributed more significantly (27 ± 16%). Brick kilns, where coal and other low quality fuels are burned together, are suggested as the most probable origins of unapportioned OC. The chemical profiling of emissions from brick kilns and other sources unique to Lahore would contribute to a better understanding of OC sources in this megacity.     

Sediments deposition due to soil erosion in the watershed region of Mangla Dam

Soil erosion is the most important reason of sedimentation load of water reservoirs in the world. In Pakistan, Mangla dam is one of the most important water reservoirs used for the production of electricity and for the supply of water for irrigation purposes. However, the capacity of Mangla dam reservoir has reduced by more than 20% since its construction. This study highlights the impact of rainfall on soil erosion and consequently on sedimentation deposition in Mangla dam reservoir. Sedimentation, annual rainfall, and normal rainfall data of 39 years were used in this study. Shuttle Radar Topographic Mission data were used to calculate the total drainage area of the Mangla watershed region. The sedimentation data of Mangla reservoir from 1967 to 2005 were retrieved from Water and Power Development Authority in Pakistan. The meteorological observatories in the Mangla watershed region are identified. Annual rainfall data from 1967 to 2005 for the meteorological observatories in the Mangla watershed regions were retrieved from Pakistan Meteorological Department (PMD). In addition, normal rainfall data for the years 1949 to 1978 and for the years 1979 to 2008 were also retrieved from PMD. The impact of annual rainfall is observed on sedimentation load in Mangla dam. The correlation coefficient between annual rainfall and sedimentation load is 0.94. This study shows that with an increase in rainfall, the soil erosion of the area increases which subsequently is responsible for the increase in the rate of sedimentation load in Mangla dam. This study further demonstrates that better soil management can reduce the sedimentation load in the Mangla reservoir.     

Zero waste management of spent mushroom compost

Journal of Material Cycles and Waste Management - Edible mushroom are grown commercially using lignocellulosic waste by applying a biological process. However after the harvesting season about 70%...     

Spatial analysis of mortality rate of pedestrian accidents in Iran during 2012–2013

Objectives: Considering the high mortality rate of pedestrians in traffic accidents in Iran, the present study aimed to determine the high-risk and low-risk areas of accidents resulting in pedestrian deaths and the spatial analysis of their mortality rates.

Methods: This cross-sectional study included 4,371 deceased pedestrians reported by the Legal Medicine Organization in Iran from March 2012 to March 2013. For spatial analysis, the collected data were entered into ArcGIS software version 10.2 and a spatial map of the mortality rate was drawn according to the distribution of data in the provinces. Using this software, high-risk and low-risk areas were identified by calculating the spatial autocorrelation of the data. The Moran’s index of road accident patterns was surveyed and high-risk and low-risk points were identified using the local Getis index.

Results: The age-standardized incidence rate was 6.8 per 100,000. After analyzing the data using ArcGIS software, the local Moran’s index showed a cluster pattern with a high mortality rate in 3 provinces of Mazandaran, Gilan, and Qazvin. In identifying high-risk and low-risk points, the local Getis index showed 3 hot spots with a confidence interval of 99% in Qom, Qazvin, and Mazandaran and 5 hot spots with a 95% confidence interval in Markazi, Tehran, Zanjan, Gilan, and Golestan provinces.

Conclusions: According to the cluster pattern of accidents in the 3 provinces and the presence of hot spots in 9 provinces, it is necessary to identify factors that increase the risk of death in the study provinces in order to reduce the mortality rate among pedestrians due to traffic accidents. Therefore, to reduce the pedestrian mortality rate, especially in high-risk provinces, some studies need to be conducted to determine the risk factors in pedestrian mortality.     

Challenges on the recycling of cigarette butts

Environmental Science and Pollution Research - Cigarette butt (CB)&nbsp;is a crucial litter in urban communities because it may contain various toxicants. Due to serious limitations on...