Remediation of copper polluted red soils with clay materials

Attapulgite and montmorillonite were utilized to remediate heavy metal polluted red soils in Guixi City, Jiangxi Province, China. The e ects of clay minerals on availability, chemical distribution, and biotoxicity of Cu and Zn were evaluated. The results provided a reference for the rational application of clay materials to remediate heavy metal contaminated soils. From the sorption experiment, the maximum adsorbed Cu2+ by attapulgite and montmorillonite was 1501 and 3741 mg/kg, respectively. After polluted red soil was amended with attapulgite or montmorillonite and cultured at 30 and 60 days, soil pH increased significantly compared to the control. An 8% increase in the amount of montmorillonite in soil and 30 days incubation decreased acid exchangeable Cu by 24.7% compared to the control red soil. Acid exchangeable Cu decreased with increasing amounts of attapulgite and montmorillonite, with best remediation e ect reached at a dose of 8%. Results also showed that the Cu poisoning e ect on earthworms was reduced with the addition of attapulgite and montmorillonite. Montmorillonite showed the best e ect, with the addition of a 2% dose the mortality of earthworms decreased from 60% to zero compared to the control. Our results indicated that the bioavailability of Cu in soils was reduced more e ectively with the application of montmorillonite than attapulgite.     

Application of magnetic particles modified with amino groups to adsorb copper ions in aqueous solution

A magnetic adsorbent can be easily recovered from treated water by magnetic force,without requiring further downstream treatment.In this research,amine-functionalized silica magnetite has been synthesized using N-[3-(trimethoxysilyl)propyl]-ethylenediamine(TPED) as a surface modification agent.The synthesized magnetic amine adsorbents were used to adsorb copper ions in an aqueous solution in a batch system,and the maximum adsorption was found to occur at pH 5.5 ± 0.1.The adsorption equilibrium data fitted t...     

南淝河沉积物有机物污染及其生态风险评价

参照文献报道的提取方法,利用GC和HPLC对南淝河不同河段沉积物中的四种浓度较高有机污染物(苯酚、氯代苯类、多环芳烃(PAHs)和邻苯二甲酸酯类(PAEs))进行了定量分析,结果表明其浓度高低顺序为多环芳烃类＞邻苯二甲酸酯类＞氯代苯类＞苯酚类.与世界各地表层沉积物中有机污染物的浓度进行对比,分析了南淝河各河段沉积物的有...     

彭水电站蓄水前后鱼类群落多样性特征

根据2006-2008年9-10月渔业资源动态监测资料,分析研究了彭水电站蓄水前后坝上和坝下江段鱼类群落结构变化及其生物多样性变化特征.研究结果表明:3次监测中,调查江段出现的鱼类共有9科44属63种,其中长江上游特有鱼类22种;渔获物中,群体数量主要由体重＜50 g的小型鱼类和幼鱼组成,而群体重量主要由＜500g的中...     

臭氧处理循环冷却水节能减排效益分析

文章基于臭氧(O3)处理法处理循环冷却水因可以同时达到阻垢脱垢、缓蚀、杀菌等多重功能,其在国外已得到广泛应用,同时国内也逐步普及应用的环境下,结合国内外长期的工程实践经验,从节水、节能、减排和公共卫生效益四个方面,详细分析了臭氧处理循环冷却水所带来的巨大经济效益、社会效益和环境效益。     

建设项目施工期环境监理实施要点

建设项目施工期环境监理实施要点是国家建设项目环境管理的重要组成部分,通过分析建设项目施工期环境监理要点的内容,提出环境监理实施要点的作用和实施环境监理实施要点的要求.     

碳钢在高温高盐矿井水中腐蚀与缓蚀性能的试验研究

为了解决高温高盐矿井水对碳钢管道和设备腐蚀问题,进行了缓蚀挂片试验,研究适应该类水质的缓蚀剂种类和最佳投加量。试验结果表明：软化剂氢氧化钙和碳酸钠对碳钢均有一定缓蚀效果．其平均缓蚀率分别为17．33％、57．46％。因此药剂软化过程同时达到防腐效果有限：单独投加缓蚀剂HEDP的缓蚀效果明显,其静态缓蚀率82．46％以上,动态缓蚀率76．45％：复合配方缓蚀剂的缓蚀效果最好,最佳配方为“有机膦酸一聚环氧琥珀酸一锌盐”或“有机膦酸一磺酸基团多元共聚物一锌盐”,在投加量80mg／L时动态缓蚀率接近90％。     

“十二五”地表水国家环境监测网络吉林省水环境国控监测点位布设的构想

根据国家环境质量监测网络,对“十二五”地表水环境质量监测断面调整工作要求,吉林省在辖区内所有水环境质量监测断面及采样点基础上,完成了松花江流域和辽河流域国控监测断面的优化调整工作。在此过程中,如何从国家尺度上,既能充分反映吉林省水环境质量状况,又能满足国家对地表水环境管理需求进行了深入思考。本文以吉林省为例,在确定国控监测断面及采样点的布设中．提出了自己的构想和建议。     

快速高效去除微囊藻的GO/QPEI复合纳米材料

本研究合成了一种新型高效的去除铜绿微囊藻(Microcystis aeruginosa)的氧化石墨烯/季铵盐聚乙烯亚胺(GO/QPEI)纳米复合材料.GO/QPEI在pH为4~10的条件下都具有高效去除M.aeruginosa的能力,其去除能力在2 min内可达96%以上.GO/QPEI对微囊藻的吸附更符合Freundlich方程,最大吸附量为5.58×1011cells·mg-1.吸附动力学表明GO/QPEI的假二级吸附反应.GO纳米片和QPEI的协同效应是其高效去除微囊藻的主要机制.     

Effects of metal and acidic sites on the reaction by-products of butyl acetate oxidation over palladium-based catalysts

Catalytic oxidation is widely used in pollution control technology to remove volatile organic compounds. In this study, Pd/ZSM-5 catalysts with different Pd contents and acidic sites were prepared via the impregnation method. All the catalysts were characterized by means of N2 adsorption- desorption, X-ray fluorescence （XRF）, HE temperature programmed reduction （H2-TPR）, and NH3 temperature programmed desorption （NH3-TPD）. Their catalytic performance was investigated in the oxidation of butyl acetate experiments. The by-products of the reaction were collected in thermal desorption tubes and identified by gas chromatography/mass spectrometry. It was found that the increase of Pd content slightly changed the catalytic activity of butyl acetate oxidation according to the yield of CO2 achieved at 90%, but decreased the cracking by-products, whereas the enhancement of strong acidity over Pd-based catalysts enriched the by-product species. The butyl acetate oxidation process involves a series of reaction steps including protolysis, dehydrogenation, dehydration, cracking, and isomerization. Generally, butyl acetate was cracked to acetic acid and 2- methylpropene and the latter was an intermediate of the other by-products, and the oxidation routes of typical by-products were proposed. Trace amounts of 3-methylpentane, hexane, 2-methylpentane, pentane, and 2-methylbutane originated from iso4merization and protolysis reactions.