双金属和多金属系统对零价铁利用效率的改进

为解决Fe0-PRB(零价铁-渗透反应格栅)中Fe0利用效率低、易板结堵塞的问题,分别采用粒径为0.074 mm的试剂铁粉和0.150～0.270 mm的工业铁粉为反应介质,在铁粉表面负载不同比例的Cu或Ni制备Cu/Fe、Ni/Fe双金属和Cu/Ni/Fe多金属颗粒,研究Fe0、双金属和多金属系统去除Cr(Ⅵ)的性能、机制.结果表明:双金属和多金属系统的Cr(Ⅵ)去除率明显高于Fe0,试剂铁粉的Cr(Ⅵ)去除率明显高于工业铁粉.反应8 h达到平衡后,试剂铁粉和工业铁粉的Cr(Ⅵ)去除率仅为45%和20%,Cu/Fe双金属、Cu/Ni/Fe多金属的Cr(Ⅵ)去除率均能达到90%以上,以试剂铁粉和工业铁粉制备的Ni/Fe双金属的Cr(Ⅵ)去除率最高分别为76.6%和44.0%.不同负载率的双金属和多金属系统反应过程中可溶的ρ〔Cr(Ⅲ)〕较低.反应后溶液的pH从反应前的5.0升至10.0左右.反应初期ρ(TFe)(TFe为总铁)超过了0.30 mg/L,其余时间均达标.反应过程中ρ(Cu2+)均在0.40 mg/L以下,均未检测出Ni2+.研究显示,双金属和多金属系统显著提高了Fe0利用效率.      

典型西南工业城市柳州市核心区大气污染物时空分布与气象因素研究

为研究柳州市核心区大气污染物浓度时空变化规律与气象因素之间的关系,统计分析了2018年全年研究区内6个自动监测站点PM_(2.5)、PM_(10)、SO_2、NO_2、O_3和CO的浓度监测数据和气象站气象数据,并对28次超标日污染物来源进行了解析.结果显示:①核心区颗粒污染物污染较为严重,且以PM_(2.5)为主的细颗粒污染物仍为柳州市主要的大气污染物;各污染物月均浓度季节差异显著,除NO_2外柳州大气污染物浓度下降明显,指示柳州市多项节能减排综合整治措施成效显著;PM_(2.5)、PM_(10)、CO受早晚高峰期影响,浓度日变化均呈双峰型;NO_2在不同季节峰型不同,作为O_3前体物其浓度日变化与O_3相反,呈现"早峰午谷"的变化趋势.②通过对污染物浓度插值发现,由于核心区主要工商业区位于西部且处于主导风向下风向,故PM_(2.5)和SO_2浓度西北高、东南低,PM_(10)、NO_2和CO浓度西南高、东北低;核心区东部的山区为O_3生成带来大量前体物,使O_3浓度东南高、西北低.③由于气候特征,核心区春、夏季主要气象因素均为降水量;秋季的主要气象因素是风速,风速与污染物的负相关关系表明了风的扩散效应;冬季大部分污染物与气象因素的相关性不显著,表明人为因素对污染物的影响大于气象因素;核心区大气污染物主要来源于局地排放和区域传输,且南北主导风向对大气污染影响最大.④HYSPLIT模型结果指示柳州超标日大气污染物主要来自于珠三角地区,且陆源颗粒物浓度普遍比海洋源高,来自南部的远距离输送气流颗粒物含量最低,表明远距离输送为影响颗粒物传播的主要原因.     

河北水库及湖泊沉积物中DDT农药的残留特征与风险评估

分析了河北省主要湖泊水库沉积物中有机氯农药(DDT)的残留特征与生态风险.2004年秋季采集了河北12个水库和2个湖泊的表层沉积物样品,利用GC-ECD测定DDTs农药的含量,在此基础上分析了其残留与组成特征以及生态风险.结果表明:1)河北省主要湖泊水库沉积物中DDTs的平均含量为3.328 ng·g-1,其含量范围为1.014～9.022 ng·g-1;并且,不同样品中DDTs的含量的差异较大,变异系数均超过65%.2)临城水库、陡河水库、龙门水库3个样点的表面沉积物中wDDT/(wDDD wDDE)＞1,表明有新的DDT输入;岗南水库、邱庄水库、黄壁庄水库3个样点的表面沉积物中wDDD/wDDE＞1,说明DDD降解环境为厌氧条件;其余8个样点wDDD/wDDE＜1,说明DDD降解环境为好氧条件.3)所有样点中DDT、DDD和DDE浓度均低于ERM,并且大部分小于ERL,表明其生态风险大多低于10%;但11个样点的DDTs含量介于ERL和ERM之间,表明其生态风险大多介于10%～50%.     

Enhancing the adsorption function of biochar by mechanochemical graphitization for organic pollutant removal

• Mechanochemical treatment reduced the calcination temperature for biochar synthesis. • Biochar is converted to graphite after mechanochemical treatment. • Biochar was reduced to nanoscale after mechanochemical treatment. Biochar (BC) has been extensively studied as adsorbent for the treatment of water pollution. Despite the distinct advantages, the high calcination temperature and low adsorption capacity of pristine BC limit its practical applications. Most of the former studies focused on the structure and/or surface modification to improve the adsorption capacity of BC. However, the harsh experiment conditions involved in the biochar modification limited the application in industrial level. Herein, we introduced mechanical treatment into BC preparation to reduce the calcination temperature and improve the adsorption capacity simultaneously. The results indicated that the calcination temperature was reduced and the adsorption capacity of the treated BC was improved after mechanochemical treatment. Characterization of the samples disclosed that BCs were graphitized with the particle size reduced to nanoscale after treatment. Adsorption tests indicated that the mechanochemically treated BCs showed much better removal performance of organic contaminants than that of pristine BCs. For instance, among four pristine BCs (BC600, BC700, BC800, and BC900), only BC900 has strong adsorption capacity for MB, while BC600 has low adsorption capacity (1.2 mg/g). By comparison, the adsorption capacity of MB increased greatly to 173.96 mg/g by BC600-500/1 (treated at 500 r/min for 1 hour). To optimize the mechanochemical treatment, the effects of rotation speed and agitation duration were also investigated.     

Microbial responses to the use of NaClO in sediment treatment

• Chlorine addition enhanced the release of TOC, TN from the sediment. • Chlorine has a long-term negative effect on microbial richness. • Usually enzymes lose activity, and expression of genes was downregulated. • Carbon degradation and nitrification might be strongly inhibited. Chlorine is often used in algal removal and deodorization of landscape waters, and occasionally used as an emergency treatment of heavily polluted sediments. However, the ecological impact of this practice has not been fully studied and recognized. In this study, NaClO at 0.1 mmol/g based on dry weight sediment was evenly mixed into the polluted sediment, and then the sediment was incubated for 150 days to evaluate its microbial effect. Results showed that NaClO addition enhanced the release of TOC, TN, Cr and Cu from the sediment. The microbial richness in the examined sediment decreased continuously, and the Chao1 index declined from 4241 to 2731, in 150 days. The microbial community composition was also changed. The abundance of Proteobacteria and Bacteroidetes increased to 54.8% and 4.2% within 7 days compared to the control, and linear discriminant analysis (LDA) showed gram-negative bacteria and aerobic bacteria enriched after chlorination. The functional prediction with PICRUSt2 showed the functions of the microbial community underwent major adjustments, and the metabolic-related functions such as carbon metabolism, including pyruvate and methane metabolisms were significantly inhibited; besides, 15 out of 22 analyzed key enzymes involved in C cycling and 6 out of 12 key enzymes or genes involved in N cycling were strongly impacted, and the enzymes and genes involved in carbon degradation and denitrification showed remarkable downregulation. It can be concluded that chlorination posed a seriously adverse effect on microbial community structure and function. This study deepens the understanding of the ecological effects of applying chlorine for environmental remediation.     

温度和pH值对活性污泥法脱氮除磷的影响

温度和pH值是影响污水脱氮除磷效果的2个重要因素.试验采用连续搅拌槽式反应器(continuous stirred tank reactor,CSTR),通过对不同温度和pH值条件下的硝化、反硝化、释磷和吸磷反应速率的测定,总结出温度和pH值对活性污泥生化反应速率的影响规律.试验表明,硝化和反硝化速率随温度的升高而加快.在5℃和33℃时,硝化速率分别为0.01 kg NH4 -N/(kg VSS·d)和0.28 kg NH4 -N/(kg VSS·d);在5℃和30℃时,反硝化速率分别为0.097 kg NO3--N/(kg VSS·d)和0.476 kg NO3--N/(kg VSS·d);但温度对吸磷和释磷速率的影响不大.pH值对硝化、反硝化、吸磷和释磷速率均有显著影响,在pH值为7.74时,硝化速率为0.095 kg NO3--N/(kg VSS·d);而在pH值为4.9和10.08时,硝化速率仅为0.005 kg NO3--N/(kg VSS·d)和0.006 kg NO3--N/(kg VSS·d).在pH值为7.85时,反硝化速率达到最大值0.36 kg NO3--N/(kg VSS·d);而在偏酸性和碱性条件下,反硝化速率显著下降.     

粒状羟基氧化铁对废水中硝酸盐的吸附

本实验研究了粒状羟基氧化铁(GFH)对人工配制含氮废水中NO3--N吸附的影响因素、吸附等温线和吸附动力学。结果表明,GFH的吸附平衡时间为80 min,增加NO3--N溶液的初始浓度,去除率下降;pH值为5时GFH对NO3--N的吸附能力最强,pH值升高和降低,吸附能力均下降;GFH对NO3--N的吸附能力随着温度的升高略有降低;在25℃下,以Langmuir方程和Freundlich方程分别对GFH吸附NO3--N的等温线进行拟合,拟合效果以Langmuir方程较好,相关性达到0.9930。GFH吸附NO3--N的过程符合拟二级动力学方程,初始时刻的吸附速率h在35℃时最大,为1.653 mg/(g.mg),吸附速率常数随温度的升高而增大;吸附反应的活化能Ea为54.72 kJ/mol。本研究结果表明,GFH在饮用水脱氮和含氮浓度较低的污水再生回用领域有实际应用的潜力。     

不同酶强化污泥为燃料微生物燃料电池特性对比分析

采用单室无膜悬浮阴极微生物燃料电池(MFC),对比分析了蛋白酶和淀粉酶强化剩余污泥为燃料的MFC(ESMFC)产电特性、酶特性和污泥减量化效果。研究表明,投加蛋白酶的ESMFC最大功率密度比对照组增加106.2%,投加淀粉酶时ESMFC最大功率密度比对照组增加48%。蛋白酶作用主要体现在投加后的前12小时,而淀粉酶作用时间则较长,为投加后的前144小时,但在运行前期,由于高温作用,导致系统内的酶活性较强,投加的淀粉酶作用则不明显。投加蛋白酶的系统内TCOD、TSS和VSS去除率分别为82%、65%和85%,而投加淀粉酶的系统内TCOD、TSS和VSS去除率分别达到86%、67%和88%。此研究对于ESMFC中外加酶的选择具有一定意义。     

Polycyclic aromatic hydrocarbon (PAH) deposition to and exchange at the air-water interface of Luhu, an urban lake in Guangzhou, China

Urban lakes are vulnerable to the accumulation of semivolatile organic compounds, such as PAHs from wet and dry atmospheric deposition. Little was reported on the seasonal patterns of atmospheric deposition of PAHs under Asian monsoon climate. Bulk (dry + wet) particle deposition, air-water diffusion exchange, and vapour wet deposition of PAHs in a small urban lake in Guangzhou were estimated based on a year-round monitoring. The total PAH particle deposition fluxes observed were 0.44-3.46 μg m⁻² day⁻¹. The mean air-water diffusive exchange flux was 20.7 μg m⁻² day⁻¹. The vapour deposition fluxes of PAHs ranged 0.15-8.26 μg m⁻² day⁻¹. Remarkable seasonal variations of particulate PAH deposition, air-water exchange fluxes and vapour wet deposition were influenced by seasonal changes in meteorological parameters. The deposition fluxes were predominantly controlled by the precipitation intensity in wet season whereas by atmospheric concentration in dry season.     

柴油车加载减速工况烟度排放测试软件开发

依据《柴油车加载减速烟度排放标准》和《柴油车加载减速工况烟度检测计算机控制试验规程》的要求,开发了柴油车加载减速工况烟度排放测试软件。详细介绍了该测试软件的功能和特点。