污染物排放与巴州产业经济发展关系研究

本文以"十三五"环境统计数据及巴音郭楞蒙古自治州统计年鉴为数据源分析了巴州污染源时空变化及污染物排放强度,总结出污染物排放主要受社会经济生产、能源消耗、产业发展及环境保护政策等综合因素影响,并提出了建议以期政策实施促进巴州环境经济可持续发展.     

An antibiotic composite electrode for improving the sensitivity of electrochemically active biofilm biosensor

• Antibiotic azithromycin employed in graphite electrode for EAB biosensor. • Azithromycin at 0.5% dosage increased the sensitivity for toxic formaldehyde. • Azithromycin increased the relative abundance of Geobacter. • Azithromycin regulated thickness of electroactive biofilm. Extensive research has been carried out for improved sensitivity of electroactive biofilm-based sensor (EAB-sensor), which is recognized as a useful tool in water quality early-warning. Antibiotic that is employed widely to treat infection has been proved feasible in this study to regulate the EAB and to increase the EAB-biosensor’s sensitivity. A novel composite electrode was prepared using azithromycin (AZM) and graphite powder (GP), namely AZM@GP electrode, and was employed as the anode in EAB-biosensor. Different dosages of AZM, i.e., 2 mg, 4 mg, and 8 mg, referred to as 0.25%, 0.5% and 1% AZM@GP were under examination. Results showed that EAB-biosensor was greatly benefited from appropriate dosage of AZM (0.5% AZM@GP) with reduced start-up time period, comparatively higher voltage output, more readable electrical signal and increased inhibition rate (30%-65% higher than control sensor with GP electrode) when exposing to toxic formaldehyde. This may be attributed to the fact that AZM inhibited the growth of non-EAM without much influence on the physiologic or metabolism activities of EAM under proper dosage. Further investigation of the biofilm morphology and microbial community analysis suggested that the biofilm formation was optimized with reduced thickness and enriched Geobacter with 0.5% AZM@GP dosage. This novel electrode is easily fabricated and equipped, and therefore would be a promising way to facilitate the practical application of EAB-sensors.     

Construction,renovation, and demolition waste in landfill: a review of waste characteristics,environmental impacts,and mitigation measures

Environmental Science and Pollution Research - With the increase in global population, industrialization, and urbanization, waste from construction, renovation, and demolition (CRD) activities has...     

Evaluation of phoxim toxicity on aquatic and zebrafish intestinal microbiota by metagenomics and 16S rRNA gene sequencing analysis

Environmental Science and Pollution Research - Phoxim is one of the main organophosphorus pesticides used in agricultural production. However, little information is known about how it affects the...     

One-part alkali-activated slag binder for cemented fine tailings backfill: proportion optimization and properties evaluation

In this study, a one-part alkali-activated slag (AAS) composed of ground-granulated blast furnace slag, desulfurized gypsum, and hydrated lime is proposed as alternative to cement for the production of cemented fine tailings backfill (CFTB), which is an environmentally friendly binder consisting of 93.72 wt.% industrial solid waste. Results show that AAS with 67.83 wt.% slag, 25.92 wt.% desulfurized gypsum, and 6.25 wt.% hydrated lime yields the highest strength, which is 1.7–3.2 times that of ordinary Portland cement (OPC). Aside from calcium silicate hydrate gel, appreciable quantity of ettringite characterized by interlocking needles structure and high bound water is also produced during the AAS hydration process. In addition, the hydration heat of the AAS binder is 48% less than that of OPC. Moreover, CFTB made of AAS provides better workability than that of CFTB with OPC up to 20 h. The findings of this study will contribute to the production of more cost-effective, durable, and environmental-friendly cemented fine tailings backfill.

     

某高密度街区大气颗粒物质量浓度分布特征实测研究

为研究城市高密度街区大气颗粒物浓度分布特征,2019年秋季对上海市某高密度街区道路大气颗粒物浓度、空气温度、相对湿度、地理位置、车辆与道路图像视频信息进行了同步移动在线监测,并结合街区内固定站数据和后向轨迹模拟结果,总结了影响街区大气颗粒物浓度变化的主要因素。结果表明:城市大气颗粒物背景拟合值处于较低水平时,街区内的大气颗粒物浓度变化和影响因素易被识别;机动车污染源对大气颗粒物浓度贡献大,其中大型机动车的影响明显;户外施工和道路清扫会引起大气颗粒物浓度上升,其中PM₁₀上升更明显;交通密度大的十字路口大气颗粒物浓度通常较高;城市高架的盖状结构会阻碍大气颗粒物在垂直方向上的扩散,引起局部大气颗粒物浓度上升;街区内高大浓密的乔木对近地面的大气颗粒物屏蔽效果不理想,甚至有助于颗粒物累积;早晚高峰时段大气颗粒物浓度较非高峰时段高。     

初始扰动对CO2抑制瓦斯爆炸特性研究*

为了预防实际生产过程中发生的瓦斯爆炸事故,利用20 L球形爆炸装置,通过改变粉尘仓充压压力产生不同的扰动,研究9.5%CH4浓度下不同扰动条件对CO2抑爆特性的影响。通过对所得参数进行分析,得到CO2抑爆特性与初始扰动的关系。研究结果表明:相较于均匀静置状态,初始扰动的存在均能提高CH4的爆炸强度,当引发初始扰动的粉尘仓压力为1.5 MPa时,最大爆炸压力达到0.78 MPa;随CO2浓度增大,爆炸强度整体下降,呈二次下降趋势、最大爆炸压力时间呈上升趋势,且各初始扰动压力间爆炸强度均大于均匀静置状态、最大爆炸压力时间小于均匀静置状态;同时利用CHEMKIN软件得到绝热平衡压力,计算热损失参数发现,同一气体混合比例工况下,初始扰动状态的热损失及热损失分数明显低于均匀静置状态的,且当CO2浓度为15%时,差距最大,不同初始扰动间热损失及热损失分数最小值分别为0.013 19 kJ/m2,17.9%,远小于静置状态下0.036 29 kJ/m2,46.4%,说明初始扰动对于CO2抑爆效果存在削弱作用。     

静脉产业类生态工业园区标准的研究

以静脉产业和静脉产业类生态工业园区的基本概念为基础,深入分析了我国建立静脉产业类生态工业园区标准的重要意义. 选取经济发展、资源循环与利用、污染控制和园区管理4个方面共20个指标,构成静脉产业类生态工业园区评价指标体系,旨在全面、准确地反映静脉产业类生态工业园区的建设水平. 经过综合分析,确定采用层次分析(AHP)法对评价指标体系进行权重计算. 根据权重分析结果可得出如下结论:静脉产业类生态工业园区的建设重点应为提高资源循环利用率和保障环境安全,污染控制以固体废物的安全处置为主. 最后,对该评价指标体系进行了可行性分析,该方法所设定的各项指标在经济上、技术上、可操作性上都是可行的. 依据该评价方法,制定了国家《静脉产业类生态工业园区标准》.      

水泥窑共处置废农药生命周期评价研究

国内在水泥窑共处置废农药方面的研究处于起步阶段. 通过开展试烧试验,以生命周期评价方法(LCA)为研究手段, 对水泥窑共处置废农药技术的环境影响进行评价,并与危险废物的其他处置方法做比较,以处置1 kg危险废物为功能单位. 结果表明,常规危险废物焚烧的综合环境负荷指数为1.428 4×10-12 a-1, 而水泥窑中共处置废农药的综合环境负荷指数为0.183 9×10-12 a-1,远低于常规危险废物焚烧.      

氧化-微絮凝-高速过滤应用于再生水生产的研究

以中国北方缺水地区污水再生利用为目标,采用常规滤料双层过滤探讨高速微絮凝、氧化过滤再生水处理技术,试验通过不同的滤料级配、滤层厚度的对比试验;采用3种混凝剂和3种助凝剂做筛选试验,发现采用1#混凝剂,HFO助凝剂做絮凝氧化剂效果较理想,得出高速微絮凝氧化过滤工艺处理城市污水厂二级出水的工艺是可行的。试验装置的滤池单位面积周期产水量为50m3/(m2.h),最佳工艺条件下出水浊度去除率为92.21%,平均浊度为0.889NTU;COD去除率为55.58%,平均为22.33mg/L;PO34--P去除率为84%,平均为0.135mg/L;色度去除率为80.7%,平均为1.45度,完全符合GB/T18920-2002《城市污水再生利用城市杂用水质》要求。