Detailed Ecological Footprint Accounting of Liaoning in 2006

Ecological footprint （EF） has received considerable attention as a useful indicator in the context of sustainable development. So far, EF has been used in numerous studies by academies, organizations and government authorities. However, the results of these studies failed to be comparable directly with each other due to imprecise data sets, unmodified accounting methods of pasture and fossil energy, ignored secondary products, undefined process Of calculating yield factors and improper biocapacity for biodiversity. In this paper, we elaborated on EF estimating methods from six categories of consumption in order to overcome the limitations above. We adopted precise data and revised methods, calculated EF of some secondary products, introduced weighted factor to calculate yield factors and adjusted biocapacity by an appropriate amount. Meanwhile, we investigated the resource consumption of Liaoning Province in 2006 to assess EF. Its results showed that Liaoning Province overused its natural capital and was in an unsustainable state. We concluded that two specific problems that had arisen in EF assessment and gave some suggestions for Liaoning Province to improve its unsustainable state.     

Nitrogen removal from landfill leachate via ex situ nitrification and sequential in situ denitrification

Ex situ nitrification and sequential in situ denitrification represents a novel approach to nitrogen management at landfills. Simultaneous ammonia and organics removal was achieved in a continuous stirred tank reactor (CSTR). The results showed that the maximum nitrogen loading rate (NLR) and the maximum organic loading rate (OLR) was 0.65 g N l^?1 d^?1 and 3.84 g COD l^?1 d^?1, respectively. The ammonia and chemical oxygen demand (COD) removal was over 99% and 57%, respectively. In the run of the CSTR, free ammonia (FA) inhibition and low dissolved oxygen (DO) were found to be key factors affecting nitrite accumulation. In situ denitrification was studied in a municipal solid waste (MSW) column by recalculating nitrified leachate from CSTR. The decomposition of MSW was accelerated by the recirculation of nitrified leachate. Complete reduction of total oxidized nitrogen (TON) was obtained with maximum TON loading of 28.6 g N t^?1 TS d^?1 and denitrification was the main reaction responsible. Additionally, methanogenesis inhibition was observed while TON loading was over 11.4 g N t^?1 TS d^?1 and the inhibition was enhanced with the increase of TON loading.     

Assessing the sustainability of major cities in China

Rapid urbanization in the developing world calls for attention to address the issue of urban sustainability, especially in emerging countries such as China, where social equity and environmental conditions have been marginalized by the rapid economic development. In this paper, we addressed the above issue with an attempt to answer the following questions: (1) How did the sustainability of Chinese cities evolve over time? (2) What are the driving forces for the evolution? By constructing a composite index that incorporates three major aspects of sustainability, economy, environment, and social equity, we characterized the recent evolution of Chinese cities and assessed the disparity among regions in terms of the sustainability measures. Further, we analyzed the driving forces for the change of sustainability indices through a driving force-pressure-state-effect model. We substantiate our numerical analysis of Chinese cities with a detailed case study of Urumqi, the capital of Xinjiang Autonomous Region, which has experienced significant change over the past 3 decades in every aspect of sustainability. We highlight some fundamental socioeconomic driving forces that have caused spatial restructuring, reflected by land-use change, and consequently impacted the urban environment of Urumqi. A brief case analysis of Guangzhou is also provided.     

全面落实新《安全生产法》强化焦化企业安全管理

新《安全生产法》的颁布和实施,对焦化企业提出了更高的要求。焦化企业可以通过完善安全仪表系统、开展危险与可操作分析、建立企业安全生产预警体系、贯彻执行焦化行业安全生产标准和建立现代企业安全管理制度来更好地促进其安全生产。     

地表载荷对硬岩区埋地管道应力应变影响分析

为研究地表载荷对硬岩区埋地管道力学性能的影响,建立了管-土耦合三维数值模型,分析了地表载荷大小、作用面积、管道压力、管道径厚比及回填土弹性模量对管道应力分布、塑性应变、椭圆度的影响。结果表明:地表压载作用下,高应力区首先出现在管道顶部且呈椭圆形;随着地表载荷及其作用面积的增大,管道高应力区逐渐扩大,管道截面左右两侧也出现应力集中;随着回填土弹性模量、管道壁厚及内压的增加,管道顶部高应力区及最大等效应力均减小。塑性应变首先出现在管顶,且塑性区随地表载荷、载荷作用长度增加而增大,随回填土体弹性模量及管道壁厚增大而逐渐减小;当内压为0~4MPa时,管道塑性应变及塑性区随内压的增大而减小。管道椭圆度随回填土体弹性模量、管道内压、壁厚增加而逐渐减小,随地表压载增大而增大。     

关于气溶胶颗粒物沉积率系数平均方法模型的改进研究

气溶胶颗粒物在壁面的沉积率系数模型的研究已经成为现代气溶胶动力学研究的重要课题.本文通过实验腔测量和理论分析相结合,对Koivisto等(2012)提出的平均方法模型(AM)中的关键参数(即时间间隔)的选取和对测量数据量的要求两个问题进行研究.选取目前广泛使用的最小二乘法模型(LSM)和Lai和Nazaroff(2000)提出的理论分析模型进行对比.研究发现,AM模型中的时间间隔这一关键参数,应由目前的50矫正为20;AM模型和LSM模型均要求实验测量数据个数等于或者大于10,但是AM模型在小数据量情况下的预测结果更精确.     

铜-磺胺嘧啶复合胁迫对蔬菜种子发芽的急性毒性效应

研究了黄潮土中常用兽药磺胺嘧啶(SD)与重金属铜(Cu)单一及复合污染对小白菜和西红柿种子发芽(发芽率、根伸长、芽伸长)的影响,分析了土壤中药物浓度与作物生长抑制的剂量-效应关系及复合污染的毒性效应。结果表明,无论是在Cu或SD单一污染物作用下,根伸长和芽伸长抑制率与污染物浓度显著相关(P0.01),发芽抑制率与污染物浓度不相关(P0.05);污染物对根伸长及芽伸长的抑制高于对种子发芽的抑制;SD对2种作物的毒性效应明显强于Cu,SD对小白菜和西红柿根伸长的ID50(抑制率为50%时污染物浓度)分别为1.7和33.6 mg·kg~(-1),而Cu为273.6和457.7 mg·kg~(-1)。Cu-SD复合污染,对西红柿的根和芽伸长的拮抗作用显著(P0.01);但对小白菜来说,在低浓度Cu(100 mg·kg~(-1))作用下,二者的联合拮抗作用不显著(P0.05),随Cu的增加,拮抗作用显著(P0.01)。     

烧结机共处置危险废物过程中重金属Pb、Zn的挥发特性

利用化学试剂PbCl2、ZnCl2来模拟危险废物,研究了烧结机共处置危险废物过程中Pb、Zn的挥发特性.首先选取PbCl2、ZnCl2两种化合物的纯化学试剂分别进行了热重分析实验,然后对掺有一定比例PbCl2、ZnCl2的烧结矿原料进行煅烧,采集分析煅烧烟气和煅烧所得烧结矿中Pb和Zn的总量.实验结果表明,在刚开始煅烧的一段时间内,Pb、Zn两种重金属挥发特性相似,均是随着时间的增加以及温度的升高而挥发率逐渐上升,而当煅烧超过一定时间后,其挥发和固化反应会达到平衡,当煅烧的温度为1200℃时,Pb和Zn的挥发率分别为97.13%和65.04%.运用化学反应动力学理论对Pb、Zn两种重金属在烧结机共处置过程中的挥发规律进行动力学模拟,模拟结果表明,PbCl2中Pb挥发的动力学方程可表示为α=f(T,t)=1-exp[-7.90exp(-5595/T)t];而ZnCl2中的Zn为α=f(T,t)=1-exp[-0.534exp(-3210/T)t].     

Hg0 removal from flue gas over different zeolites modified by FeCl3

The elemental mercury removal abilities of three different zeolites (NaA, NaX, HZSM-5) impregnated with iron (III) chloride were studied on alab-scale fixed-bed reactor. X-ray diffraction, nitrogen adsorption porosimetry, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and temperature programmed desorption (TPD) analy-ses were used to investigate the physicochemical properties. Results indicated that the pore structure and active chloride species on the surface of the samples are the key factors for physisorption and oxidation of Hg⁰, respectively. Relatively high surface area and micropore volume are beneficial to efficient mercury adsorption. The active Cl species generated on the surface of the samples were effective oxidants able to convert elemental mercury (Hg⁰) into oxidized mercury (Hg²⁺). The crystallization of NaCl due to the ion exchange effect during the impregnation of NaA and NaX reduced the number of active Cl species on the surface, and restricted the physisorption of Hg⁰. Therefore, the Hg⁰ removal efficiencies of the samples were inhibited. The TPD analysis revealed that the species of mercury on the surface of FeCl₃-HZSM-5 was mainly in the form of mercuric chloride(HgCl₂), while on FeCl₃-NaX and FeCl₃-NaA it was mainly mercuri coxide(HgO).