Assessment of potential dermal and inhalation exposure of workers to the insecticide imidacloprid using whole-body dosimetry in China

In China, although improvements to the pesticide registration process have beenmade in last thirty years, no occupational exposure data are required to obtain a commercial license for a pesticide product. Consequently, notably little research has been conducted to establish an exposure assessment procedure in China. The present study monitored the potential dermal operator exposure from knapsack electric sprayer wheat field application of imidacloprid in Liaocheng City, Shandong Province and in Xinxiang City, Henan Province, China, using whole-body dosimetry. The potential inhalation exposure was determined using a personal air pump and XAD-2 sample tubes. The analytical method was developed and validated, including such performance parameters as limits of detection and quantification, linear range, recovery and precision. The total potential dermal and inhalation exposures were 14.20, 16.80, 15.39 and 20.78 mL/hr, respectively, for the four operators in Liaocheng and Xinxiang, corresponding to 0.02% to 0.03% of the applied volume of spray solution. In all trials, the lower part (thigh, lower leg) of the body was the most contaminated, accounting for approximately 76% to 88% of the total exposure. The inhalation exposure was less than 1% of the total exposure. Such factors as the application pattern, crop type, spray equipment, operator experience and climatic conditions have been used to explain the exposure distribution over the different parts of the body. As indicated by the calculated Margin of Exposure, the typical wheat treatment scenarios when a backpack sprayer was used are considered to be safe in terms of imidacloprid exposure.     

Effects of water regime,crop residues,and application rates on control of Fusarium oxysporum f. sp. cubense

Biological soil disinfestation is an effective method to control soil-borne disease by flooding and incorporating with organic amendments, but field conditions and resources sometimes limited its practical application. A laboratory experiment was conducted to develop practice guidelines on controlling Fusarium wilt, a widespread banana disease caused by Fusarium oxysporum f. sp. cubense (FOC). FOC infested soil incorporated with rice or maize straw at rates of 1.5 tons/ha and 3.0 tons/ha was incubated under flooded or water-saturated (100% water holding capacity) conditions at 30°C for 30 days. Results showed that FOC populations in the soils incorporated with either rice or maize straw rapidly reduced more than 90% in the first 15 days and then fluctuated till the end of incubation, while flooding alone without organic amendment reduced FOC populations slightly. The rapid and dramatic decrease of redox potential (down to − 350 mV) in straw-amended treatments implied that both anaerobic condition and strongly reductive soil condition would contribute to pathogen inactivation. Water-saturation combined with straw amendments had the comparable effects on reduction of FOC, indicating that flooding was not indispensable for inactivating FOC. There was no significant difference in the reduction of FOC observed in the straw amendments at between 1.5 and 3 tons/ha. Therefore, incorporating soil with straw (rice or maize straw) at a rate of 3.0 tons/ha under 100% water holding capacity or 1.5 tons/ha under flooding, would effectively alleviate banana Fusarium wilt caused by FOC after 15-day treating under 30°C.     

Cu–Mn–Ce ternary mixed-oxide catalysts for catalytic combustion of toluene

Cu–Mn, Cu–Mn–Ce, and Cu–Ce mixed-oxide catalysts were prepared by a citric acid sol–gel method and then characterized by XRD, BET, H₂-TPR and XPS analyses. Their catalytic properties were investigated in the toluene combustion reaction. Results showed that the Cu–Mn–Ce ternary mixed-oxide catalyst with 1:2:4 mole ratios had the highest catalytic activity, and 99% toluene conversion was achieved at temperatures below 220°C. In the Cu–Mn–Ce catalyst, a portion of Cu and Mn species entered into the CeO₂ fluorite lattice, which led to the formation of a ceria-based solid solution. Excess Cu and Mn oxides existed on the surface of the ceria-based solid solution. The coexistence of Cu–Mn mixed oxides and the ceria-based solid solution resulted in a better synergetic interaction than the Cu–Mn and Cu–Ce catalysts, which promoted catalyst reducibility, increased oxygen mobility, and enhanced the formation of abundant active oxygen species.     

Do vehicular emissions dominate the source of C6–C8 aromatics in the megacity Shanghai of eastern China?

The characteristic ratios of volatile organic compounds(VOCs) to i-pentane, the indicator of vehicular emissions, were employed to apportion the vehicular and non-vehicular contributions to reactive species in urban Shanghai. Two kinds of tunnel experiments, one tunnel with more than 90% light duty gasoline vehicles and the other with more than 60% light duty diesel vehicles, were carried out to study the characteristic ratios of vehicle-related emissions from December 2009 to January 2010. Based on the experiments, the characteristic ratios of C6–C8aromatics to i-pentane of vehicular emissions were 0.53 ± 0.08(benzene), 0.70 ± 0.12(toluene),0.41 ± 0.09(m,p-xylenes), 0.16 ± 0.04(o-xylene), 0.023 ± 0.011(styrene), and 0.15 ± 0.02(ethylbenzene), respectively. The source apportionment results showed that around 23.3% of C6–C8 aromatics in urban Shanghai were from vehicular emissions, which meant that the non-vehicular emissions had more importance. These findings suggested that emission control of non-vehicular sources, i.e. industrial emissions, should also receive attention in addition to the control of vehicle-related emissions in Shanghai. The chemical removal of VOCs during the transport from emissions to the receptor site had a large impact on the apportionment results. Generally, the overestimation of vehicular contributions would occur when the VOC reaction rate constant with OH radicals(k OH) was larger than that of the vehicular indicator, while for species with smaller k OH than the vehicular indicator, the vehicular contribution would be underestimated by the method of characteristic ratios.     

Heterogeneous oxidation of SO2 by O3-aged black carbon and its dithiothreitol oxidative potential

Ozone (O₃) is an important atmospheric oxidant. Black carbon (BC) particles released into the atmosphere undergo an aging process via O₃ oxidation. O₃-aged BC particles may change their uptake ability toward trace reducing gases such as SO₂ in the atmosphere, leading to different environmental and health effects. In this paper, the heterogeneous reaction process between O₃-aged BC and SO₂ was explored via in-situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Combined with ion chromatography (IC), DRIFTS was used to qualitatively and quantitatively analyze the sulfate product. The results showed that O₃-aged BC had stronger SO₂ oxidation ability than fresh BC, and the reactive species/sites generated on the surface had an important role in the oxidation of SO₂. Relative humidity or 254 nm UV (ultraviolet) light illumination enhanced the oxidation uptake of SO₂ on O₃-aged BC. The oxidation potentials of the BC particles were detected via dithiothreitol (DTT) assay. The DTT activity over BC was decreased in the process of SO₂ reduction, with the consumption of oxidative active sites.     

膨润土负载纳米铁的改性及对水中As(Ⅴ)的吸附

用十六烷基三甲基溴化铵(CTMAB)对膨润土负载纳米零价铁(Bent-n ZVI)进行表面改性,得到表面改性膨润土负载纳米铁(Bent-n ZVI)/CTMAB。通过SEM、Zeta电位和中位径d(50)分析,与膨润土(Bent)、改性膨润土(CTMAB-Bent)、Bent-n ZVI进行了对比,结果表明:相比Bent-n ZVI,(Bent-n ZVI)/CTMAB中的纳米铁颗粒更为分散且呈链状分布,d(50)仅为5.21μm,并且Zeta电位为+0.65 m V,更易静电吸引和吸附阴离子As O43-。4种材料的除砷结果亦表明其中(Bent-n ZVI)/CTMAB去除率最高,达到了93.9%。光电子能谱(XPS)分析表明(Bent-n ZVI)/CTMAB的除砷产物中只有As(Ⅴ),并不存在其还原态As(Ⅲ),说明(Bent-n ZVI)/CTMAB是通过吸附作用去除As(Ⅴ)。     

再生水消毒副产物去除技术研究进展

三卤甲烷、卤乙酸、卤乙腈、三氯硝基甲烷以及N-亚硝基二甲胺是再生水氯/氯胺消毒中主要的消毒副产物,具有较强的毒性和致癌性,严重威胁生态安全及人体健康。目前难以通过改变消毒条件来减少其生成量,而去除其前驱物可有效降低消毒副产物的生成。文章介绍了氧化法、混凝沉淀法、离子交换法以及膜过滤等方法去除消毒副产物前驱物的研究,重点分析了臭氧氧化法去除消毒副产物前驱物的影响因素,对已生成的消毒副产物的去除也进行了简述。     

两种方法测定固定污染源废气中铅的对比研究

以石英纤维滤筒采样,采用硝酸-氢氟酸消解体系,建立了火焰原子吸收光谱法和电感耦合等离子体原子发射光谱法测定固定污染源废气中铅的分析方法。分别对两种方法的波长选择、干扰因素、标准曲线、检出限、准确度和精密度等方面进行了对比研究,并对两种方法的测定结果进行t检验。结果表明,两种方法无显著性差异,均可用于固定污染源废气中铅的含量测定。     

废水中α-氯代环己基苯基甲酮的电化学降解

采用石墨电极对含α-氯代环己基苯基甲酮的氯化清洗水进行电化学降解。结果表明,电化学降解对COD的去除效果非常明显,并且随着电流密度增加,COD的去除效率逐渐升高,电流密度由15 mA/cm2增加至100 mA/cm2, COD的去除率从39.7%升高到72.3%;电化学降解作用下,水样可生化性显著提高,降解2 h后,(BOD5)/(COD)由原水的0.22提高到0.46;电化学降解过程中,COD的降解遵循零级反应动力学方程;此外,还对电化学降解过程中α-氯代环己基苯基甲酮的降解途径进行了推测。     

亚热带城市河流生态河岸的研究

随着生活水平的提高,城市河流生态河岸日益受到重视.从城市河流河岸的现状分析,到国内外城市河流生态河岸的研究,包括城市河流生态河岸的规划与实践,较为全面的体现了城市河流生态河岸的结构与功能,并提供了亚热带城市河流生态河岸的研究案例,基于亚热带的气候条件及研究基础,为亚热带城市河流生态河岸进一步研究提供参考.