Emergency membrane contactor based absorption system for ammonia leaks in water treatment plants

Because of the suspected health risks of trihalomethanes (THMs), more and more water treatment plants have replaced traditionalchlorine disinfection process with chloramines but often without the proper absorption system installed in the case of ammonia leaksin the storage room. A pilot plant membrane absorption system was developed and installed in a water treatment plant for this purpose.Experimentally determined contact angle, surface tension, and corrosion tests indicated that the sulfuric acid was the proper choice as the absorbent for leaking ammonia using polypropylene hollow fiber membrane contactor. Effects of several operating conditionson the mass transfer coefficient, ammonia absorption, and removal efficiency were examined, including the liquid concentration,liquid velocity, and feed gas concentration. Under the operation conditions investigated, the gas absorption efficiency over 99.9%was achieved. This indicated that the designed pilot plant membrane absorption system was effective to absorb the leaking ammonia in the model storage room. The removal rate of the ammonia in the model storage room was also experimentally and theoretically foundto be primarily determined by the ammonia suction flow rate from the ammonia storage room to the membrane contactor. The ammoniaremoval rate of 99.9% was expected to be achieved within 1.3 h at the ammonia gas flow rate of 500 m3/h. The success of the pilot plantmembrane absorption system developed in this study illustrated the potential of this technology for ammonia leaks in water treatmentplant, also paved the way towards a larger scale application.     

A risk assessment system for alien plant bio-invasion in Xiamen, China

Bio-invasion has caused serious ecosystem damage and enormous economic losses in China,and it has been the greatest factor to island bio-diversity reduction.Xiamen,as an important seaport with a relatively high conservation value,is particularly vulnerable to bio-invasion for its typical island ecosystem as well as frequent human-made disturbance.As a result of field surveys,literature review, and consultation with experts,a list of 67 alien plants identified as major invaders(12 species)and emerging inv...     

ESD模拟器校验研究现状及进展

介绍了静电放电模拟器校验系统的组成及原理.在综述国内外静电放电模拟器校验研究现状的基础上,指出该研究领域当前需要进一步研究的问题和发展方向.研究结论表明,需要对现行静电放电抗扰度试验标准(IEC 61000-4-2)进行完善,并提出了改进建议;选用在较大频率范围上具有平坦频率响应的电流靶等校验设备;全面分析校验测试的误差来源及影响;改进校验程序和方法.     

一株菲高效降解菌的环境适应性研究

生物降解是多环芳烃从环境中去除的主要途径,菲是一种典型的三环芳烃。本研究考察了一株能高效降解多环芳烃菲的鞘氨醇单胞菌GY2B在含河沙环境及不同盐度的人工海水环境中的生长特性与降解菲的情况。结果表明：河沙的加入对菌株GY2B的生长及其高效降解菲的性能均无明显影响,65 h可将起始浓度为100 mg/L的菲降解99.5%以上;而经过驯化后在添加85%人工海水的条件下该菌也仍可正常生长并高效降解菲,66 h可将起始浓度为100 mg/L的菲几乎完全降解。本研究结果可为菌株GY2B在受多环芳烃污染的河滩、河口及近海海洋环境修复中的应用提供参考依据。     

景观水体治理技术的研究

随着城市的日益发展,人们对城市环境的要求也日益提高,水景主题公园、水景建筑的不断涌现,对改善城市人居环境、提升城市形象有着重要的作用。但是近年来环境污染日益严重,常规水处理方法又不能简单地应用于景观水体的治理,人们对景观水体的治理也提出了迫切的要求。景观水体水质控制技术的研究,对营造与自然和谐的城市生态环境具有重要的作用。文章就目前对景观水体常用的物理、化学、生物及生态修复等各种方法进行了阐述,特别重点介绍了近年来新兴的人工湿地等生态修复处理方法。     

泰安市城市污泥集中处置的可行性探讨

近年来,随着中国污水处理设施的普及、处理率的提高和处理程度的深化,污水处理厂的污泥产生量将有较大的增长,由污泥引起的二次污染问题已不容忽视。如何合理地处理、处置污水处理厂污泥已成为相关部门必须引起重视的问题。本文对污水处理厂污泥的传统处理存在的问题,进行了系统的分析和研究,并根据泰安市城市污水处理厂污泥运行现状就泰安市污泥以干化的方式集中处置的可行性进行了技术分析和探讨,并分析了今后污泥处置的发展趋势。     

乙蒜素乳油在黄瓜和土壤中的残留消解动态

采用田间试验,对乙蒜素乳油在长沙、广州、山东、北京四地的黄瓜及土壤中的残留进行了研究,结果表明乙蒜素在黄瓜中的消解速度较快,乙蒜素在黄瓜中半衰期分别为广州3．47d,长沙1．37d,山东2．10d,北京3．18d;乙蒜素在土壤中半衰期分别为广州3．34d,长沙2．46d,山东2．60d,北京2．89d;41％乙蒜素乳油兑水稀释1500倍（乙蒜素浓度为33．75mg·L^-1）,使用2次,末次施药7d后,乙蒜素在未检出-0．011mg·kg^-1,在土壤中为未检出。该药属于易降解农药（T1/2〈30d）,按推荐剂量使用是安全的。     

江苏省灰霾监测现状与发展的探讨

介绍了目前灰霾天气最新的定义、成因以及背景知识等,针对江苏省灰霾监测状况进行了研究,提出了合理、可行的对策与建议,并对当前国内外灰霾监测仪器性能、参数、功能等方面进行了分类总结.     

稻壳焦炭导电特性的影响因素

为开发生物质焦炭电磁屏蔽材料,研究了各种因素对稻壳焦炭导电特性的影响规律.利用自制的高温炭化试验装置,考察了炭化终温、升温速率、终温下的保留时间、粒径大小、催化剂种类及配比等因素对焦炭电阻率的影响规律.研究结果表明:炭化终温对稻壳焦炭电阻率影响较大,特别是在1000℃以下,提高炭化终温可将焦炭电阻率从106 Ω·cm以上降低到2Ω·cm左右;而当炭化终温从1000℃提高到1400℃时,电阻率仅从2Ω·cm左右降低到1.5Ω·cm左右.提高升温速率会降低焦炭产率,但对电阻率的影响不大.延长炭化终温时间对降低电阻率有一定作用,但当物料粒径较小时其作用几乎可以忽略.Fe2O3和NiO可作为炭化催化剂降低焦炭电阻率,两者催化效果相当,稻壳与催化剂的最佳质量配比在50:1左右.当炭化终温>1000℃、升温速率为20℃·min-1、保留时间为30min、稻壳粒径为0.1～0.3mm、稻壳:催化剂=50:1时,所获焦炭电阻率为0.2～1.0Ω·cm.