天津黑碳气溶胶潜在来源分析与健康风险评估

采用2010~2013年BC连续在线观测资料,分析天津地区BC的季节分布、潜在来源及其健康效应.结果表明,2010~2013年BC气溶胶浓度平均值为（4.49±3.26）μg/m³,秋季浓度最高,为6.31μg/m³,冬季和夏季次之,春季最低,为2.59μg/m³.各季节BC浓度的日变化特征类似,均呈早晚双峰分布,早间峰值高于晚间,且夜间高于日间.混合层高度和近地层风从垂直和水平两方面影响BC的时空分布,各季节作用强度并不相同.浓度权重轨迹分析表明天津高浓度BC的主要贡献区域为河北、山东、河南等华北平原地区.此外,秋季内蒙古中部和山西北部等西北区域也会影响天津.天津城区各季节成人和儿童的致癌风险（CR）均高于EPA给定的可接受风险水平（10^-6）,非致癌风险水平较低,秋季因高浓度BC引发的呼吸系统死亡率相对风险为1.118,需要引起高度关注.     

DBD低温等离子体气化杨木及模型化合物

本文利用低温等离子体技术,使用介质阻挡放电反应器气化杨木屑、纤维素、木聚糖和木质素,用控制变量法研究了频率、载气对反应系统产气能力的影响以及生物质化学组成的气化特性.结果表明,频率越小、载气电离能越低,气化率越高,杨木的最佳气化率为64.11%;木聚糖和纤维素气化产物相似,较纤维素和木质素产气率更高并且能够产生更多CO;木质素主要生成气化炭.同时,利用SEM、BET对原料及气化炭进行了表征研究得出碱金属在高温下发生结晶;木聚糖在气化过程中会发生熔融;等离子体的高功率以及更多的氧化性物质能够使气化炭比表面积显著增加,达到150.71m²/g.     

螺形龟甲轮虫形态结构对环境变化的响应

以螺形龟甲轮虫为研究对象,于2015年7月至2018年12月,选取广东南澳岛及湖南常德中营养至中度富营养水体共14个样点进行采样,对螺形龟甲轮虫进行了形态特征测量分析.结果表明,水温是螺形龟甲轮虫形态变化最主要影响因子,且与背甲长、背甲宽、棘刺长度均呈显著负相关（P<0.01）.不同纬度条件下螺形龟甲轮虫形态参数差异显著,常德地区螺形龟甲轮虫个体显著大于南澳地区（P<0.05）.螺形龟甲轮虫形态存在显著季节性变化,各形态参数随季节波动呈现夏秋、冬春分化模式.螺形龟甲轮虫后棘刺长随水体营养程度增加而减小（F=159.4,P<0.01）,富营养条件下后棘刺长度占全长的比例减小（F=167.5,P<0.01）.研究结果表明,螺形龟甲轮虫棘刺长度可作为水质生物监测指标,并为研究全球气候变暖提供重要参考.     

Chemical characteristics, oxidative potential, and sources of PM2.5 in wintertime in Lahore and Peshawar, Pakistan

The chemical characteristics, oxidative potential, and sources of PM_2.5 were analyzed at the urban sites of Lahore and Peshawar, Pakistan in February 2019. Carbonaceous species, water soluble ions, and metal elements were measured to investigate the chemical composition and sources of PM_2.5. The dithiothreitol (DTT) consumption rate was measured to evaluate the oxidative potential of PM_2.5. Both cities showed a high exposure risk of PM_2.5 regarding its oxidative potential (DTT_v). Carbonaceous and some of the elemental species of PM_2.5 correlated well with DTT_v in both Lahore and Peshawar. Besides, the DTT_v of PM_2.5 in Lahore showed significant positive correlation with most of the measured water soluble ions, however, ions were DTT-inactive in Peshawar. Due to the higher proportions of carbonaceous species and metal elements, Peshawar showed higher mass-normalized DTT activity of PM_2.5 compared to Lahore although the average PM_2.5 concentration in Peshawar was lower. The high concentrations of toxic metals also posed serious non-carcinogenic and carcinogenic risks to the residents of both cities. Principle component analysis coupled with multiple linear regression was applied to investigate different source contributions to PM_2.5 and its oxidative potential. Mixed sources of traffic and road dust resuspension and coal combustion, direct vehicle emission, and biomass burning and formation of secondary aerosol were identified as the major sources of PM_2.5 in both cities. The findings of this study provide important data for evaluation of the potential health risks of PM_2.5 and for formulation of efficient control strategies in major cities of Pakistan.     

Preparation and characterization of boron-doped corn straw biochar: Fe (Ⅱ) removal equilibrium and kinetics

Nowadays, iron ions as a ubiquitous heavy metal pollutant are gradually concerned and the convenient and quick removal of excessive iron ions in groundwater has become a major challenge for the safety of drinking water. In this study, boron-doped biochar (B-BC) was successfully prepared at various preparation conditions with the addition of boric acid. The as-prepared material has a more developed pore structure and a larger specific surface area (up to 897.97 m²/g). A series of characterization results shows that boric acid effectively activates biochar, and boron atoms are successfully doped on biochar. Compared with the ratio of raw materials, the pyrolysis temperature has a greater influence on the amount of boron doping. Based on Langmuir model, the maximum adsorption capacity of 800B-BC_1:2 at 25 °C, 40 °C, 55 °C are 50.02 mg/g, 95.09 mg/g, 132.78 mg/g, respectively. Pseudo-second-order kinetic model can better describe the adsorption process, the adsorption process is mainly chemical adsorption. Chemical complexation, ions exchange, and co-precipitation may be the main mechanisms for Fe²⁺ removal.     

Improvement of nuclide leaching resistance of paraffin waste form with low density polyethylene

Low-level liquid borate wastes have been immobilized with paraffin wax using a concentrate waste drying system (CWDS) in Korean nuclear power plants. The possibility for improving chemical durability of paraffin waste form was suggested in this study. A small amount of low density polyethylene (LDPE) was added to increase the leaching resistance of the existing paraffin waste form. The influence of LDPE on the leaching behavior of waste form was investigated by performing leaching test according to ANSI/ANS-16.1 procedure during 325 days. It was observed that the leaching of nuclides immobilized within paraffin waste form made a marked reduction although little content of LDPE was added to waste form. The acceptance criteria of paraffin waste form associated with leachability index (LI) and compressive strength after the leaching test were fully satisfied with the help of LDPE.     

Numerical Simulation of Light/Dark Cycle Frequency of Microalgae Fluid in a Helical Tubular Photobioreactor for Carbon Dioxide Capture

In the present study, three-dimensional numerical simulations are conducted on hydrodynamics and light-intensity distribution of microalgae fluid flow in a helical tubular photobioreactor for CO₂ capture. The effect of incident direction of the light illumination is discussed and the light/dark cycle frequency experienced by the microalgae fluid in the cross-section of the photobioreactor is investigated. The simulation results reveal the steadily nonhorizontal and unsymmetrical Dean roll-cells of the microalgae fluid flow in the cross-section of the helical tube. The external light projecting onto the helical tubular photobioreactor from the center is a better way for microalgae cultivation. The light/dark cycle frequency of the microalgae fluid flow is calculated based on the light-intensity distribution inside the photobioreactor. The light/dark cycle frequency keeps constant for the same stream trace of the microalgae flow while varies with different flow regions. Meanwhile, the light/dark cycle frequency increases with the increase in microalgae fluid velocity. The suitable demarcation between the light and the dark zone depends on the shape and the location of the Dean roll-cells.     

工业污水水质在线监测系统研究与推广应用

为了加强对污染源的监控,准确地掌握污染物排放情况,中国石油天然气股份有限公司组织开展了水质在线监测系统研究,并逐步建立了污染源在线监测系统。文章介绍了有关水质在线监测系统的研究现状以及研究成果应用和推广情况。     

接枝淀粉高分子絮凝剂的合成及其应用

本文研究了Ｃｅ（Ⅳ）／ＨＮＯ３引发体系下，丙烯酰胺──淀粉接枝共聚合反应的影响因素及最佳工艺条件，由此得到的接枝淀粉接技效率达到９４．９％，支链分子量超过３００万．对多种工业污水絮凝处理结果表明，ＣＯＤｃｒ去除率、污泥沉降速度均不逊于聚丙烯酰胺３００万产品．