Complete catalytic oxidation of o-xylene over Ce02 nanocubes

The activities of CeO2 nanocubes calcined at different temperatures were tested for catalytic oxidation of o-xylene. Using CeO2 nanocubes as catalysts, complete catalytic oxidation of o-xylene was achieved below 210℃. The CeO2 nanomaterials were characterized by means of BET, X-ray diffraction (XRD), transmission electron microscopy (TEM), and high-resolution transmission electron microscopy (HRTEM). From the TEM images, all Ce02 nanocubes displayed cubic morphology irrespective of calcination temperature. The HRTEM images revealed that these nanocubes were enclosed by reactive {001}planes, which may contribute to the intrinsically catalytic property of o-xylene oxidation. The higher activity of Ce02 nanocubes calcined at 550℃ than those calcined at above 550℃ was attributed to their smaller crystallite size and larger surface area. The influences of reaction conditions were also studied, which found that a higher reaction temperature was necessary for complete catalytic oxidation of o-xylene at higher weight hourly space velocity (WHSV) and o-xylene concentration.     

Characteristics of nitrogen and phosphorus removal in a sequencing batch reactor

Laboratory scale experiments were conducted to study the characteristics of N and P removal under different influent organic carbon concentration in a sequencing batch reactor (SBR) with simple anaerobic/aerobic operating mode. Experimental results indicated that, under the operating condition of influent N concentration of 89 mg/L and P concentration of 15 mg/L, when the influent C/N ratio increased from 1.5 to 6.9 (influent C/P ratio from 9 to 41), total N and P removal efficiency improved from 50% and 46% to 78% and 96% respectively. Track studies of N, P and other operating parameters demonstrated that N removal of the SBR was realized through simultaneous nitrification and denitrification (SND) in the aeration phase and anoxic denitrificaiton in the filling phase, P removal was accomplished through conventional anaerobic P release and aerobic P taken-up process. Keeping dissolved oxygen (DO) concentration during the first two aeration hours as low as 0.1-0.6 mg/L is essential for the simultaneous occurrences of nitrification, denitrification and P-taken up.     

Decolorization of dye solutions with Ruditapes philippinarum conglutination mud and the isolated bacteria

Application of Ruditapes Philippinarum conglutination mud (RPM) for decolorizing synthetic dye solutions was studied. RPM showed good activity for decolorization of Methylene Blue, Crystal Violet, Malachite Green, and Ink Blue. The amount of the RPM had great effect on the decoloration rate of the dye solutions. However, the decoloration rate did not continue to increase when the amount of mud exceeded the optimum dose. The temperature of the dye solution had a remarkable effect on the decolorization rate of Ink Blue solution, but had little effect on the other three dye solutions. The initial pH of the dye solutions evidently affected the decolorization rate of Malachite Green solution, but had less effect on the other three. The decolorization rate of the dye solutions increased significantly with treatment time within 8 hr, but tended to be steady after 8 hr for Methylene Blue, Crystal Violet and Malachite Green solutions, and after 12 hr for Ink Blue solution. The decolorization efficiencies for the four dye solutions under the optimum conditions were all above 90%. Seventeen strains screened from RPM showed flocculation ability for kaolin clay suspension. Out of them, the flocculation rate of strain ZHT3-9 and strain ZHT4-13 were up to 88.14% and 86.01%, respectively. ZHT3-9 was studied, and its decolorization rate for Methylene Blue, Crystal Violet, and Malachite Green reached 90.02%, 89.21%, and 80.29%, respectively. By morphological, physiological and biochemical characteristics analysis and 16S rRNA sequencing, the strain ZHT3-9 was identified as Arthrobacter sp.     

基于动态SDG模型的间歇过程HAZOP方法研究

危险与可操作性分析（HAZOP）是目前应用最为广泛的安全评价方法之一。然而,通过对国内外已实施的生产过程安全评价方法及相关计算机辅助安全评价软件调查发现,目前对间歇过程HAZOP分析的研究还较少。因此,将Petfi网与符号定向图（SDG）相结合,以SDG模型为主,Petri网模型为辅,建立专门针对间歇过程HAZOP分析的动态SDG模型。由于Petfi网可以准确描述间歇过程的离散事件特性,而SDG能够恰当描述间歇过程的连续特性,二者结合使该模型成为间歇过程HAZOP分析的有力工具。     

新疆D矿田金矿资源定量评价

本文在建立D矿田找矿信息层次模型基础上,确定矿田统计单元划分和地质变量提取的赋值原则,将该矿田划分出466个统计单元,提取25个地质变量并进行二态赋值,而后应用数量化理论Ⅲ。特征分析法及勃尔法等方法,建立了矿田金矿资源定量评价模型,定位预测了45个勘探靶区。     

额尔齐斯—玛因鄂博断裂带——新疆一个重要的构造结合带

新疆阿勒泰区的额尔齐斯—玛因鄂博断裂带是划分阿尔泰褶皱区与北准噶尔褶皱区的一条重要构造结合带。南北两区,无论在地层、构造、喷发—侵入活动、矿化作用以及变质程度上均有明显不同,资料表明,它经历了长期的发育过程,最终发展成为两区的天然分界线。     

“华夏古陆”考异

自葛利普创名“华夏古陆”以来,经过半个多世纪的论辩与考订,对其地质构造属性,至今仍然否定与肯定交迭起伏,莫衷一是,本文从推覆构造,陆地漂移等实际资料着手,加以论证,认为它是经历深刻改造和发生巨大位移的变质岩断片体,地质构造属性已非“华夏古陆”原义。     

再论次生石英岩型非金属矿床

次生石英岩型非金属矿床明显受不同级别的火山构造控制,是中—酸性火山岩区一套很有特色的矿床组合;热源、水源、地层产状有机组合生成的环流热液是成矿的前提之一;成矿流体以重碳酸盐型、硫酸盐型为主,属中—低盐度热液;温度、pH值、fo_2等物理化学条件是矿床及矿种类刑的重要控制因素。本文在《次生石英岩容矿型非金属矿床系列的矿种、组合及其成矿作用特征》(1986)一文基础上,进一步总结这类矿床的成矿机理和地质地球化学模式。     

化学法处理含酚废水的组合工艺系统和条件研究

采用化学法组合的三种工艺系统,对含酚废水进行了工艺条件的研究。结果表明,对于浓度<30mg/l含酚废水,采用氧化凝聚处理是有效的;而对于30～80mg/l含酚废水,选用氧化凝聚和吸附组合的工艺系统处理,能使排放水中酚和COD达标。     

Study on nitrile-degrading microorganisms

Two strains of bacteria were isolated from nitrile polluted soils, and identified as Corynebacterium boffmanii and Arthrobacter flavescens. Acetonitrile, propionitrile, butyronitrile and acrylonitrile were degraded by these bacteria to yield corresponding amides, carboxylic acids and ammonia. The nitrile-degrading abilities of these strains were investigated. The removal rates for the nitrile were nearly 100%, after these bacteria were grown in medium containing 10000 ppm of aceto-, propio-, or butyronitrile at 28 ℃ for 24h. When the reaction mkture consisting of 5000 ppm of above mentioned nitriles or acrylonitrile and 20g (dry cell) /L resting cells of the two strains in 0.06mol/L phosphate buffer (pH7.5) was incubated separately at 25 ℃ with moderate shaking for 15 or 45 min, the nitrile could be degraded completely. The optimum growth conditions for C.hoffmanii and A.flavescens were studied as well.