Evaluation of diffusive gradients in thin films technique (DGT) for measuring Al, Cd, Co, Cu, Mn, Ni, and Zn in Amazonian rivers

Studies concerning the lability and bioavailability of trace metals have played a prominent role in the search for contamination of water resources. This work describes the first application yet of the diffusive gradients in thin films technique (DGT) to the determination of the fraction of free plus labile metals in waters from the Amazon Basin. Due to the complexity of the use of DGT for samples with low ionic strength and high organic matter content (characteristic of Amazonian rivers), a new analytical procedure was developed. The method is based on the determinations of apparent diffusion coefficients (D_ap) in the laboratory, by performing deployments in samples collected in the corresponding sites of study. The D_ap thereby determined is then used for in situ measurements. The suitability of the proposed approach for determination of labile Al, Cd, Co, Cu, Mn, Ni, and Zn in the Amazon River and Rio Negro (English: Black River) was evaluated. Except for Co, Mn (in a deployment at Rio Negro), Ni and Zn (in a deployment at Amazon River), labile in situ measurements were lower or similar to dissolved concentrations, indicating suitability of the proposed approach.     

A water quality monitoring network design using fuzzy theory and multiple criteria analysis

A proper water quality monitoring design is required in a watershed, particularly in a water resource protected area. As numerous factors can influence the water quality monitoring design, this study applies multiple criteria analysis to evaluate the suitability of the water quality monitoring design in the Taipei Water Resource Domain (TWRD) in northern Taiwan. Seven criteria, which comprise percentage of farmland area, percentage of built-up area, amount of non-point source pollution, green cover ratio, landslide area ratio, ratio of over-utilization on hillsides, and density of water quality monitoring stations, are selected in the multiple criteria analysis. The criteria are normalized and weighted. The weighted method is applied to score the subbasins. The density of water quality stations needs to be increased in priority in the subbasins with a higher score. The fuzzy theory is utilized to prioritize the need for a higher density of water quality monitoring stations. The results show that the need for more water quality stations in subbasin 2 in the Bei-Shih Creek Basin is much higher than those in the other subbasins. Furthermore, the existing water quality station in subbasin 2 requires maintenance. It is recommended that new water quality stations be built in subbasin 2.     

论环境监测站在污染源监测中的作用

对环保局所属监测站在污染源监测管理中的作用、监测市场化运作及地位与作为等方面进行了探讨。     

用直接加热代替水浴加热测定高锰酸盐指数

在地表水高锰酸盐指数酸性法分析中,通过对2种加热方法的实验对比,结果表明,直接加热法具有省时、省力,且精密度、准确度均能满足环境监测规范要求等优点,特别适用于大批量样品分析。     

A Routing and Scheduling System for Infectious Waste Collection

Most hospitals and clinics in Taiwan do not have on-site treatment facilities for their infectious waste and must rely on outside agencies for their collection and treatment. The problem of optimally routing and scheduling the collection of medical waste from a disperse group of facilities is recognized as a periodic vehicle routing problem. This study develops a computer system to solve the resulting optimization problem based on a two-phased approach proposed earlier. The first phase solves a standard vehicle routing problem to determine a set of individual routes for the collection vehicles. The second phase uses a mixed integer programming method to assign routes to particular days of the week. The computer system is user-friendly and consists of several Visual Basic programs while the geographical information system is incorporated to facilitate input and output interface and database management. An illustrative example for the infectious waste of 348 hospitals in the Tainan City area demonstrates the effectiveness of the system.     

The impact of watershed delineation on hydrology and water quality simulation

Flood routing is a significant calculation for predicting watershed responses, involving discharge and pollutant exports. The computation of flow routing is highly relative to the relationship between downstream and upstream subbasins. A watershed could always be divided into several subbasins based on its topography and stream distribution. How detailed of the delineation of the stream distribution in a watershed would influence the modeling accuracy of flow routing and the prediction of watershed responses. The objective of this work was to discuss the effect of watershed delineation on runoff and pollutant transport predictions. When the number of divided subbasins increases, the stream distribution could be delineated more clearly. The case area was usually regarded as two subbasins only. In the present study, the case area was divided into 43, 25, 15 and 9 subbasins respectively. If the modeling result under 43 subdivisions is assumed to be the actual situation, the relative error of runoff simulation due to the simplified delineation of stream distribution is only around 25% in two subdivisions. However, the relative error of suspended solids (SS), total nitrogen (TN) and orthophosphate (Orth-P) simulation can reach 85%, 71 and 70% in two subdivisions respectively. The uncertainties or errors induced by too much simplification of watershed delineation could be carried over and amplified to the pollutant transport process and the modeling results of pollutant exports.     

Optimal strategies for best management practice placement in a synthetic watershed

It is significant to arrange suitable design and placement of best management practices (BMPs) for reaching the aim that can not only satisfy environmental quality standards, but also decrease the total cost of BMPs. This study applied WinVAST model to predict watershed responses. The objective of this work was to discuss both the economic costs and benefits of BMPs and the control efficiency of discharge and pollutant exports, and to create some suitable standards for the optimal BMPs placement strategies. It is significant to find an optimal number and location of BMPs. In the case study herein, the number of BMPs including a detention pond and a grassy swale would be better to be given by four. The number of BMPs should also be determined by the environmental standards. Moreover, the result shows that the optimal location of BMPs placement is in the downstream area near the outlet and on the mainstream of the catchment. When the BMPs are set in these regions, it cannot only reduce the peak flow and peak pollutant exports, but also have slow time to peak watershed responses.     

环境监测机构垂直管理实施过程中的问题探析

简述了环境监测垂直管理改革的重要性和紧迫性,分析了环境监测垂直管理的意义和内涵,提出了垂直管理需要把握的原则,对环境监测机构垂直管理实施过程中值得注意的问题进行了探讨。指出垂直管理改革在解决数据行政干预的同时,应正视由此带来的不利因素,特别要避免新型干预的形成;建议连带解决环境监测工作固有的矛盾和问题,使环境监测垂直管理改革产生实实在在的成效。     

杭州市大气污染物排放清单及特征

以杭州市区为研究区域,通过调查整合多套污染源数据库及其他统计资料,研究文献报道及模型计算的各种污染源排放因子,获得杭州市区各行业PM10、PM2.5、SO2、NOx、CO、VOCs、NH3等污染物的排放量,建立了杭州市区2010年1 km×1 km大气污染物排放清单。结果表明,2010年杭州市区PM10、PM2.5、SO2、NOx、CO、VOCs和NH3的排放总量分别为7.96×104、4.02×104、7.23×104、8.98×104、73.90×104、39.56×104、3.32×104t。从排放源的行业分布来看,机动车尾气排放是杭州市区大气污染物最重要排放源之一,对PM10、PM2.5、NOx、CO和VOCs的贡献分别达到14.4%、27.1%、40.3%、21.4%、31.1%。道路扬尘、电厂锅炉、工业炉窑、植被、畜禽养殖对不同污染物分别有着重要贡献,道路扬尘对PM10和PM2.5的贡献分别为44.6%和20.0%、电厂锅炉对SO2和NOx的贡献分别为37.0%和25.7%、工业炉窑对CO的贡献为41.5%、植被排放对VOCs的贡献为27.1%、畜禽养殖对NH3的贡献为76.5%。从空间分布来看,萧山区和余杭区对SO2、NH3和植被排放BVOC的贡献要显著高于主城区;而主城区机动车对PM2.5、NOx和VOCs的贡献分别达到36.3%、56.0%和47.4%,较市区范围内显著增加,表明机动车尾气排放已成为杭州主城区大气污染最重要的来源之一。