A storm event-based approach to TMDL development

It is vitally important to define the critical condition for a receiving water body in the total maximum daily load (TMDL) development process. One of the major disadvantages of using a continuous simulation approach is that there is no guarantee that the most critical condition will be covered within the subjectively selected representative hydrologic period, which is usually several years depending on the availability of data. Another limitation of the continuous simulation approach, compared to a design storm approach, is the lack of an estimate of the risk involved. Because of the above limitations, a storm event-based critical flow-storm (CFS) approach was previously developed to explicitly address the critical condition as a combination of a prescribed stream flow and a storm event of certain magnitude, both having a certain frequency of occurrence and when combined, would create a critical condition. The CFS approach was tested successfully in a TMDL study for Muddy Creek in Virginia. The present paper reports results of a comparative study on the applicability of the CFS approach in Taiwan. The Dy-yu creek watershed in northern Taiwan differs significantly from Muddy Creek in terms of climate, hydrology, terrain, and other characteristics. Results show that the critical condition for different watersheds might be also different, and that the CFS approach could clearly define that critical condition and should be considered as an alternative method for TMDL development to a continuous simulation approach.     

Occurrence and distribution of polycyclic aromatic carbons in sludges from wastewater treatment plants in Guangdong, China

In this study, the occurrence and distribution of polycyclic aromatic hydrocarbons (PAHs) were investigated in six sludge samples collected from Guangdong Province, China. Concentrations of PAHs varying from 2,534.1 to 6,926.6 μg kg^???1 (dry sludge) were observed in three municipal wastewater treatment plants with phenanthrene (Phe), fluoranthene, and pyrene being the main compounds. In addition, 682.6 μg kg^???1 PAHs were detected in one sludge sample from a food processing plant, with fluorene, Phe, and chrysene being the main components. No PAHs were detected in sludge samples obtained from two cosmetic plants. The levels and distributional characteristics of PAHs, polychlorinated biphenyls (PCBs), and polycyclic musks (PMs) from the samples were also compared. The results of this comparison indicated that petrochemical refineries and road traffic played important roles in the PAH loads in sludge, while PMs primarily originated from domestic wastewater and industrial wastewater from cosmetic plants. Finally, the presence of 98.8 μg kg^???1 PCBs in sludge suggested diffusional emission sources from electrical components containing PCBs.     

Molecular detection and comparison of Acanthamoeba genotypes in different functions of watersheds in Taiwan

The protistan genus Acanthamoeba is a free-living amoeba existing in various environments. Within this protistan genus, there are some species recognized as potential human pathogens, which may cause granulomatous amoebic encephalitis, Acanthamoeba keratitis and chronic granulomatous lesions of the skin. In this study, 211 water samples were collected from two watersheds in southern Taiwan. We detected Acanthamoeba based on the PCR amplification with a genus-specific primer pair and investigation of Acanthamoeba in Puzih River and Kaoping River in southern Taiwan. Acanthamoeba species were detected in 34 (16.1%) samples. The presence or absence of Acanthamoeba within the water samples showed significant difference with the levels of water temperature and total coliforms. The most frequently identified Acanthamoeba genotype was T4 (n = 19), followed by T5 (n = 8), and then T15 (n = 3). Genotype T6, T7/T8, T11 and T12 were all detected once. Genotype T4, T5, T6, T11 and T15 of Acanthamoeba are responsible for Acanthamoeba keratitis and should be considered a potential health threat associated with human activities in environmental surface water watersheds.     

Locating pollutant emission sources with optical remote sensing measurements and an improved one-dimensional radial plume mapping technique

Previous studies have shown that there was a relatively large amount of uncertainty along the major wind direction in the results of locating emission sources using the one-dimensional radial plume mapping (RPM(1D)) technique based on optical remote sensing measurements. This paper proposes setting up an additional monitoring line that is perpendicular to the original scanning beam geometry to reduce this uncertainty. We first conducted a computer simulation study using the Gaussian dispersion model to generate the downwind concentrations of plumes from 400 source locations in a 201 m × 201 m spatial domain under various wind directions (n = 181). The optical remote sensing instrument was assumed to be at (0, 0) with two perpendicular monitoring lines, each of which had three beam segments of equal length. Each pair of the reconstructed downwind concentration profiles was then used to trace back to the source locations. The results showed that the accuracy of the method and its uncertainty were improved by using the proposed two-line RPM(1D) approach rather than the original one-line RPM(1D) approach at most simulated source locations. In a follow-up field experiment, a tracer gas was released at the coordinate of (100, 100). The release location was covered within the 0.25- to 0.5-probability area of the estimated results, and the distance between the actual and estimated source locations was 18.4 m (9.2% of the longest beam path).     

Chlorinated and brominated dibenzo-p-dioxins and dibenzofurans in surface sediment from Taihu Lake, China

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) in surface sediment samples from Taihu Lake--an important water supply of the Yangtze River Delta, China--were investigated in the present study. Concentrations of PCDD/Fs ranged from 0.91 to 4.8 pg TEQ g(-1) dw (mean: 2.9 pg TEQ g(-1) dw, TEQ: Toxic Equivalent), which were all higher than the threshold effect level established by interim sediment quality guidelines in Canada (0.85 pg TEQ g(-1) dw). The levels of PBDD/Fs ranged from 0.16 to 1.6 pg TEQ g(-1) dw (mean: 0.52 pg TEQ g(-1) dw) and accounted for 5-33% (mean: 14%) of the total PCDD/Fs and PBDD/Fs TEQ. Comparatively, the abundance of sedimentary PCDD/Fs in the three regions (Meiliang Bay, Gonghu Bay, and Xukou Bay) showed a decreasing trend from the inflow region to the outflow region, while no significant difference was observed among their 2,3,7,8-PBDD/Fs levels, which suggested that the sources of PCDD/Fs and PBDD/Fs differed in this area. Principal component analysis suggested that the historical production/usage of pentachlorophenol and sodium pentachlorophenate was the dominant source of PCDD/Fs in the sediment of these regions. Although the specific sources of PBDD/Fs in the sediment of Taihu Lake were unclear, it was suspected to be due to atmospheric deposition; however, an additional study is needed to confirm this.     

镇江地区土壤中重金属Cu和Pb污染状况与空间分布

为了锯镇江地区土壤中重金属Cu和Ph的污染状况与空间分布,对镇江地区表层土壤中的Cu和Pb进行了采样监测。结果表明,镇江地区表层土壤中cu的含量为19．2～273mg／kg,Pb的含量为20．6～3846mg／kg。与全省土壤背景值相比,均有一定程度的富集。对cu和Pb的相互关系进行分析可得出,镇江地区土壤在一定程度上受到农业面源的污染。     

江苏省霾污染遥感监测业务化运行研究

从霾污染遥感监测业务化流程出发,选取EOS/MODIS为主要数据源,MODIS气溶胶产品及气象数据为辅,在数据预处理的基础上,利用LM-BP人工神经网络模型算法反演区域大气颗粒物浓度,分析了可获取的遥感监测指标及气象指标对霾污染的贡献率,筛选出可业务化的霾污染遥感评价指标。对2013年1月江苏省2次典型的霾污染进行了星地同步分析,从分析结果来看,霾污染遥感监测结果与地面实测结果基本一致,霾污染遥感监测可以作为地面监测的有效补充,宏观反映区域霾污染空间分布,为大气污染防治提供有力的技术支撑。     

农药企业搬迁土地挥发性有机物风险评价

对常州某农药生产场地土壤中挥发性有机物(VOCs)污染状况以及健康风险和生态风险进行了调查评价。结果表明,该场地土壤中挥发性有机物污染以苯系物和卤代烃为主。苯系物质量浓度为0~56.6 mg/kg,卤代烃质量浓度为0~1.14 mg/kg。健康风险评价结果均在可接受范围内,而生态风险评价显示生产车间内的土壤VOCs生态风险较大,存在着对生物的危害。     

交通干道沿线土壤重金属监测与评估综述

公路运营所带来的铅、镉、锌等重金属污染物对人体健康安全存在着潜在和长期的影响。近年来,开展交通干道沿线重金属污染监测与评估工作已经成为环境监测工作的重要内容。从监测技术、评估方法、可能影响因素等几个方面对该领域的研究进展及成果进行了综述。采样段面的选取、点位的布设与样品的收集应该同时遵循全面性和代表性的原则。在同一交通干道内,均匀布置采样段面的同时可以尽量包含高车流量、中车流量与低车流量3种类型。考虑到重金属在横向距离上的分布规律,可以在0~100 m处设置密集采样点位,在100~300 m处设置适量采样点位。评估方法一般同时采用Kriging空间插值分析、污染指数分析、多元统计分析,生态风险评价与健康风险评价等多种分析方法。     

渤海湾入海溶解无机氮总量控制研究

基于渤海湾近岸海域的实际调查结果,采取生态物理耦合模型,对渤海湾的主要污染物-溶解无机氮(DIN)的基准环境容量和极小剩余海洋环境容量进行了计算。结果表明,渤海湾DIN的极小剩余海洋环境容量在Ⅰ类和Ⅱ类水质标准下均为负值,渤海湾的DIN已经超标。结合实际的海水功能区水质管理目标,应重点控制非点源的排放,加强上游携带入境污染物的处理,从总量上控制DIN入海污染通量,改善渤海湾水质。