活性炭纤维吸附废水中对硝基苯酚及其脱附研究

采用新型高效吸附剂——活性炭纤维吸附废水中对硝基苯酚，对其吸附和脱附影响因素进行了较详细的研究，确定了最佳工艺参数，并对动态吸附一脱附进行了稳定性实验。在最佳的吸附条件下，装填4g活性炭纤维可处理含对硝基苯酚1000mg/L的废水1400mL，出水对硝基苯酚浓度〈2mg／L，达到国家综合污水一级排放标准，活性炭纤维有效吸附量可达349．87mg／g。在最佳脱附条件下，脱附率〉99％，并可从高浓度脱附液中回收对硝基苯酚。稳定性实验表明，吸附-脱附性能稳定，采用活性炭纤维吸附处理对硝基苯酚废水是一种行之有效的处理方法。     

啤酒生产废水处理设计及运行研究

分析了年产15万t啤酒的生产废水情况,介绍了采用IC厌氧反应器-一体化氧化沟处理该生产废水(7 200 m3/d)的工艺路线和主要设计参数,讨论了废水处理系统的运行情况.其中IC厌氧反应器的HRT为8 h,运行温度为35～37 ℃;一体化氧化沟包括氧化沟段和沉淀池段,总尺寸为40 m×24 m×6 m.IC厌氧反应器COD容积负荷在7.78 kg/(m3·d)时,COD去除率为84%左右.整套废水处理系统的COD总去除率为98%左右,出水COD小于80 mg/L.厌氧所产生的沼气可用于废水的升温.     

The organic precursors affecting the formation of disinfection by-products with chlorine dioxide

The object of this research was to study the formation of disinfection by-products by using chlorine dioxide (ClO2) as a disinfectant reacting with different properties of organic substance in natural aquatic environment. The adsorbent resin (XAD-4, XAD-7) was used to divide the organic matters in raw water into three groups. The influence of the function groups on structure, reaction tendency, and formation of disinfection by-products generated by the reaction of these organic substances with chlorine dioxide was explored. The experimental results show that the three different organic groups formed using adsorbent resin were hydrophobic substance, hydrophilic acid, and non-acid hydrophilics in proportions of 43%, 41%, and 16%, respectively. Within the raw water in our study, the hydrophilic substance had a higher distribution proportion than that described in general articles and journals, which indicates that this water was contaminated with pollution from human beings. The exploration of the reactivity of the three different organic substances with chlorine dioxide shows that the unit consumption of disinfection agent per unit organic matters (represented by ClO2/DOC) is in the following sequence hydrophobic substance > hydrophilic substance > non-acid hydrophilics. It indicated that larger molecular organic precursors had larger consumption of disinfectant. We also discovered that after the reaction of the three different organic substances with chlorine dioxide, the largest amount of disinfection by-products were generated by the non-acid hydrophilics.     

Fractionation of fulvic acids: characteristics and complexation with copper

Two fulvic acid samples isolated from Suwannee river (International Humic Substance Society) and Feeitsuey reservoir were subjected to gel filtration chromatography (GFC) for molecular size fractionation. The GFC-eluted samples were separated into three groups corresponding to the molecular weight ranges: < 220, 220-1000, and 1000-4000. Fluorescence quenching techniques were employed for determining the conditional stability coefficient and kinetic parameters of copper complexation with the three fractions of fulvic acids. Experimental conditions were pH 6, 5 x 10(-5)m total copper and 5 mg C litre(-1) of fulvic acids. The conditional stability coefficients of the fulvic acid fractions were in the order of 0.9-3.3 x 10(5)m(-1), and the forward and reverse rate constants were in the order of 6.9-12.4 x 10(3)m(-1) s(-1) and 3.5-8.0 x 10(-2) s(-1). Information could be useful in modelling copper transport in the hydrosphere.     

Comparison of microbial community between two shallow freshwater lakes in middle Yangtze basin, East China

In order to investigate the role of the microbial community in aquatic ecology and nutrient transformations in the development of eutrophication in large shallow freshwater lakes along Yangtze River, the microbial community in the depth-related sediment in Lake Chaohu and Lake Longganhu were compared. Lake Chaohu is one of the three most polluted lakes in China. However, the neighboring Lake Longganhu, a mesotrophic lake, is relatively pristine. The total phosphorous (TP) and total nitrogen (TN) concentration in water was detected at 0.193 mgl(-1) and 3.035 mgl(-1) for Lake Chaohu, 0.051 mgl(-1) and 0.774 mgl(-1) for Lake Longganhu, respectively. The population of the microorganisms with various ecological nutrient transforming functions (e.g. phosphate solubilizing, denitrifying and cellulose decomposing) and a batch of environmental parameters concerning the nutrient accumulating and transforming (e.g. total organic carbon, total nitrogen, and total phosphorous concentrations) were assayed in the depth-related sediment samples from several defined points in both lakes. The sediment samples from Lake Chaohu showed higher density of actinomycetes (P<0.05) and phosphate-solubilizing bacteria (P<0.001) and less profusion of denitrifying bacteria (P<0.05) and cellulolytic microbes (P<0.001), compared with those of Lake Longganhu. The data suggested that the current microbial community in the sediment of Lake Chaohu is in favor of sustaining or further accelerating the process of the lake eutrophication. A possible positive feedback loop which consists of sustained growth of microorganisms and gradual decline of lake eutrophic status is worth further discussing.     

Quantification of joint effect for hydrogen bond and development of QSARs for predicting mixture toxicity

A QSAR model is successfully proposed to predict the toxicity effect on Photobacterium phosphoreum by nonpolar-narcotic-chemical mixtures and/or polar-narcotic-chemical mixtures. For nonpolar-narcotic-chemical mixtures and polar-narcotic-chemical mixtures, their corresponding hydrophobicity-based QSAR models are derived from regression analysis. Comparison of these two QSAR models make us believe that it is the joint effect of hydrogen bond in polar-narcotic-chemical mixture that leads to the difference between these two models. Such joint effect of hydrogen bond can be quantified as AMH and BMH by using the different partition coefficients of mixtures in various organic phase/water systems. And the regression analysis results convinced us that the introduction of AMH does improve the quality of the QSAR model with r2=0.948, S.E.=0.166 and F=745.201 at P=0.000 for total 84 mixtures.     

Latent hydraulic reactivity of blended cement incorporating slag made from municipal solid waste incinerator fly ash

The reactivity of cement pastes made by blending Portland cement with slag from municipal solid waste incinerator (MSWI) fly ash was investigated to assess the potential of recycling MSWI fly ash slag. The slag, prepared by melting MSWI fly ash at 1400 degrees C for 30 min, was pulverized and ground, then blended with ordinary Portland cement (OPC), using various substitution levels to make slag-blended cement (SBC). The pozzolanic reactivity of the ecocement was then characterized by determining variations in the compressive strength, degree of hydration, microstructure, speciation, and mineralogical crystalline phases. The results suggest that the strength of the pastes at an early age decreased with increasing substitution levels, whereas the strength at a later age of the tested pastes (with substitution levels less than 10%) outperformed OPC paste because of typical SBC properties. The development of strength at a later age was also confirmed by X-ray diffraction and scanning electron microscopy techniques. This implies that active silica (Si) and alumina (Al) react with the hydration product, calcium hydroxide (Ca(OH)2), to form calcium silicate hydrate (C-S-H), which contributed to strength development at a later age by the filling up of pores in the SBC pastes. The pozzolanic activity of the SBC pastes indicates that it is suitable for use as a substitute for OPC in blended cement.     

固体废弃物轮胎的热解技术

综述了国内外对废轮胎的处理状况，并详细地讨论了废轮胎热解技术的发展、分类以及典型工艺流程。热解技术主要包括油化技术、气化技术和炭化技术三种，并可制得衍生油、燃料气、碳黑等产品。分析了废轮胎热解工艺存在的问题，指出了如何开发环境友好的集成工艺是废轮胎热解工艺的发展方向。     

染料废水脱色混凝剂(PSDC-Ⅰ) 的制备和效果实验

研究了由固体废物 (炼铁废渣 )制取的含有多种金属离子的染料废水脱色混凝剂 (PSDC Ⅰ ) ,试验了它对染料废水的脱色效果及对印染废水的混凝效果 ,并与PAC进行了比较。考察了影响PSDC Ⅰ混凝及脱色效果的因素。结果表明 ,pH值在 6— 10范围内 ,PSDC Ⅰ具有良好的混凝效果。PSDC Ⅰ的两个最佳脱色区为 pH值 6— 8和 pH值 13左右。与PAC相比 ,PSDC Ⅰ不仅具有良好的混凝效果而且具有良好的脱色效果