可拓法评估煤矿瓦斯爆炸易发性

为了量化煤矿瓦斯爆炸的可能性,并为防治瓦斯爆炸提供量化指标,借鉴可拓学原理,对煤矿瓦斯爆炸易发性进行预评估。首先,详细阐述可拓学评估原理;接着,为了验证煤矿瓦斯爆炸易发性可拓评估的可行性,结合某一煤矿实例,比选煤矿瓦斯爆炸易发性的评价指标,并确定煤矿瓦斯爆炸易发性的分类标准,构建煤矿瓦斯爆炸易发性评估的经典域、节域和物元;然后,为了避免确定指标权重的人为主观因素的影响,提出用简单关联函数确定指标权重;最后,计算煤矿瓦斯爆炸易发性的关联函数值和关联度,确定瓦斯爆炸易发性的等级及其变量特征值。经计算,煤矿爆炸易发性的可拓评估结果为"很小"等级。同时,为了验证可拓评估结果的合理性,将其与模糊评估进行比较,两者所得评估结果相一致。从而表明:将可拓学应用于煤矿瓦斯爆炸易发性评估是合理可行的。     

How much real cost has China paid for its economic growth?

China’s economic growth has a serious impact on the environment and resources. How much real cost did China pay for its economic growth? This paper estimates the monetary costs of resource depletion, environmental pollution, and ecological degradation. The paper examines the geographic distribution of resource and environmental losses across 31 provinces. The findings allow us to reach the following conclusions. First, the national cost of resource depletion, environmental pollution, and ecological degradation in 2005 was 2.5 trillion RMB. It accounted for 13.5% of China’s gross domestic product (GDP). Secondly, the cost of resource depletion, ecological degradation, and environmental pollution has a different spatial distribution. The cost of resources depletion mainly distributes in the central area, the cost of environmental pollution is in the eastern area, and the cost of ecological degradation lies in the western area. Thirdly, the cost of natural resources depletion is 1,672.5 billion RMB, accounting for 67.8% of the total cost of resource and environment. It indicates that economic development has a high cost of resource depletion.     

我国城市化过程中水土资源利用问题的认识

改革开放以来，我国城市化过程出现快速发展时期，特别是长江下游地区（长江三角洲及其周边地区），由于人口与产业不断集聚，重大基础设施项目投资加大，道路网密度增加，开发区扩大，使得城市空间迭加扩展，造成了严重的水土资源利用失衡，生态环境日趋恶化，使本地区城市发展出现了许多新问题。以长江下游地区为例，对本区城市化过程中有关水土资源环境恶化、水污染增加、土地资源流失，以及城镇化速度过快的情况，作了深入分析论证，同时对长江下游地区水土资源合理开发利用与保护提出了新的思维、新的方法措施，特别是对如何加强长三角地区水质环境的整治提出了4点切实可行的办法与措施，为本地区的经济发展与生态安全提供科学依据.     

海洋石油工程清洁生产评估方法研究

从资源能源利用、废弃物产生、废弃物回收利用、污染物处理、环境管理效果和环境响应情况着手,建立了包括6个一级指标、29个二级指标的海洋石油工程清洁生产评估指标体系;研究利用专家调查和层次分析法确定各评估指标的权重值,探索评估指标的赋值方法、标准化方法,提出了海洋石油工程清洁生产综合指数计算方法体系。     

Auto-adaptive Air Distribution and Structure Optimization of Ejector Burner for Biomass Alcohol Fuels

A plenty of studies on the utilization of biomass alcohol fuels have been conducted, but combustion efficiency and stability of this fuels still need to be improved. Based on biomass alcohol fuels (bio-methanol and bio-ethanol), this paper studied auto-adaptive air distribution characteristics and optimum structure parameters of an ejector burner by numerical simulation method. Also, an experiment was conducted to verify the numerical results. The results show that the mole air entrainment ratio (MAER) keeps almost constant when the ejector fuel nozzle exit locates at the segment between the ejector throat and the suction chamber entrance, but a bigger ratio α would lead to a higher MAER till the α is bigger than 8.5 for bio-methanol and 11.5 for bio-ethanol. The bio-ethanol fuel is more beneficial for air carrying role because of its big molecular weight. Operation pressure (P_w) has a little impact on MAER of the two fuels, but the rise of back pressure (P_b) would lead to rapid decrease of MAER for the two fuels. For the optimum structure burners, the MAER can be maintained at the value of theoretical complete combustion. Its changing rate is less than 2.3% for bio-methanol and 2.5% for bio-ethanol when the burner load changes from 30% to 120%, which is highly consistent with the experimental results. The optimum burner can distribute air supply automatically with the changing of burner load.     

Rapid and simple spectrophotometric determination of persulfate in water by microwave assisted decolorization of Methylene Blue

A rapid and simple method for determination of persulfate in aqueous solution was developed. The method is based on the rapid reaction of persulfate with Methylene Blue(MB) via domestic microwave activation, which can promote the activation of persulfate and decolorize MB quickly. The depletion of MB at 644 nm(the maximum absorption wavelength of MB) is in proportion to the increasing concentration of persulfate in aqueous solution. Linear calibration curve was obtained in the range 0–1.5 mmol/L, with a limit of detection of 0.0028 mmol/L. The reaction time is rapid(within 60 sec), which is much shorter than that used for conventional methods. Compared with existing analytical methods, it need not any additives, especially colorful Fe2+, and need not any pretreatment for samples, such as p H adjustment.