Performance of biotic indices in comparison to chemical-based Water Quality Index (WQI) in evaluating the water quality of urban river

In order to evaluate the water quality of one of the most polluted urban river in Malaysia, the Penchala River, performance of eight biotic indices, Biomonitoring Working Party (BMWP), BMWP^Thai, BMWP^Viet, Average Score Per Taxon (ASPT), ASPT^Thai, BMWP^Viet, Family Biotic Index (FBI), and Singapore Biotic Index (SingScore), was compared. The water quality categorization based on these biotic indices was then compared with the categorization of Malaysian Water Quality Index (WQI) derived from measurements of six water physicochemical parameters (pH, BOD, COD, NH₃-N, DO, and TSS). The river was divided into four sections: upstream section (recreational area), middle stream 1 (residential area), middle stream 2 (commercial area), and downstream. Abundance and diversity of the macroinvertebrates were the highest in the upstream section (407 individual and H′?=?1.56, respectively), followed by the middle stream 1 (356 individual and H′?=?0.82). The least abundance was recorded in the downstream section (214 individual). Among all biotic indices, BMWP was the most reliable in evaluating the water quality of this urban river as their classifications were comparable to the WQI. BMWPs in this study have strong relationships with dissolved oxygen (DO) content. Our results demonstrated that the biotic indices were more sensitive towards organic pollution than the WQI. BMWP indices especially BMWP^Viet were the most reliable and could be adopted along with the WQI for assessment of water quality in urban rivers.     

Production of activated carbon from walnut shell by CO2 activation in a fluidized bed reactor and its adsorption performance of copper ion

Journal of Material Cycles and Waste Management - Low-cost and effective activated carbon for copper ion adsorption was prepared from walnut shell by CO2 activation in a fluidized bed. The effects...     

Coffee,its roasted form,and their residues cause birth failure and shorten lifespan in dengue vectors

Environmental Science and Pollution Research - In dengue mosquitoes, successful embryonic development and long lifespan are key determinants for the persistence of both virus and vector. Therefore,...     

Effects of pre-oxidation and adsorption on haloacetonitrile and trichloronitromethane formation during subsequent chlorination

In this study, the effects of pre-oxidants permanganate (PM), persulfate (PS), hydrogen peroxide (PO), and ozone (OZ)) and/or adsorption on pseudoboemite-chitosan shell magnetic nanoparticles (ACMNs) on haloacetonitrile (HAN) and trichloronitromethane (TCNM) formation from aspartic acid (Asp; positive charge) and/or histidine (His; negative charge) were compared. Asp and His apparently do not interact in aqueous solution during chlorination. Asp and/or His can undergo partially oxidation by PM, but are recalcitrant to direct oxidation by PS and PO. Pre-oxidation with OZ decreases the formation of HANs but increases the formation of TCNM. ACMN prefers to adsorb Asp over His in the competitive sorption of coexisting Asp and His because of attractive electrostatic interactions. The rank order for the effect of the pre-oxidants and ACMN adsorption on dichloroacetonitrile and trichloroacetonitrile formation is OZ and ACMN adsorption > PM and ACMN adsorption > PS and ACMN adsorption > PO and ACMN adsorption; that for the effect of the pre-oxidants and ACMN adsorption on TCNM formation is PM and ACMN adsorption > PS and ACMN adsorption > PO and ACMN adsorption > OZ and ACMN adsorption. The favored adsorption of Asp over His by ACMN is weakened by pre-oxidation.

     

Fine particle migration and collection in a wet electrostatic precipitator

Electrostatic precipitation is considered as an effective technology for fine particle removal. A lab-scale wet electrostatic precipitator (ESP) with wire-to-plate configuration was developed to study particle migration and collection. The performance of the wet ESP was evaluated in terms of the corona discharge characteristics, total removal efficiency and fractional removal efficiency. The corona discharge characteristics and particle removal abilities of the wet ESP were investigated and compared with dry ESP. Particle removal efficiency was influenced by discharge electrode type, SO₂ concentration, specific collection area (SCA) and particle/droplet interaction. Results showed that the particle removal efficiency of wet ESP was elevated to 97.86% from 93.75% of dry ESP. Three types of discharge electrodes were investigated. Higher particle removal efficiency and larger migration velocity could be obtained with fishbone electrode. Particle removal efficiency decreased by 2.87% when SO₂ concentration increased from 0 ppm to 43 ppm as a result of the suppression of corona discharge and particle charging. The removal efficiency increased with higher SCA, but it changed by only 0.71% with the SCA increasing from 25.0 m²/(m³/s) to 32.5 m²/(m³/s). Meanwhile, the increasing of particle and droplet concentration was favorable to the particle aggregation and improved particle removal efficiency.

Implications: This work tends to study the particle migration and collection under spraying condition. The performance of a wet electrostatic precipitator (ESP) is evaluated in terms of the corona discharge characteristics, total particle removal efficiency, and fractional particle removal efficiency. The effects of water droplets on particle removal, especially on removal of particles with different sizes, is investigated. The optimization work was done to determine appropriate water consumption, discharge electrode type, and specific collection area, which can provide a basis for wet ESP design and application.     

Medium-scale gasification of oil palm empty fruit bunch for power generation

Journal of Material Cycles and Waste Management - This paper focuses on the performance of oil palm empty fruit bunch (EFB) gasification using a medium-scale downdraft gasifier for power...     

Spatiotemporal variation of groundwater quality using integrated multivariate statistical and geostatistical approaches in Amol–Babol Plain,Iran

In recent years, groundwater quality has become a global concern due to its effect on human life and natural ecosystems. To assess the groundwater quality in the Amol–Babol Plain, a total of 308 water samples were collected during wet and dry seasons in 2009. The samples were analysed for their physico-chemical and biological constituents. Multivariate statistical analysis and geostatistical techniques were applied to assess the spatial and temporal variabilities of groundwater quality and to identify the main factors and sources of contamination. Principal component analysis (PCA) revealed that seven factors explained around 75 % of the total variance, which highlighted salinity, hardness and biological pollution as the dominant factors affecting the groundwater quality in the Plain. Two-way analysis of variance (ANOVA) was conducted on the dataset to evaluate the spatio-temporal variation. The results showed that there were no significant temporal variations between the two seasons, which explained the similarity between six component factors in dry and wet seasons based on the PCA results. There are also significant spatial differences (p?>?0.05) of the parameters under study, including salinity, potassium, sulphate and dissolved oxygen in the plain. The least significant difference (LSD) test revealed that groundwater salinity in the eastern region is significantly different to the central and western side of the study area. Finally, multivariate analysis and geostatistical techniques were combined as an effective method for demonstrating the spatial structure of multivariate spatial data. It was concluded that multiple natural processes and anthropogenic activities were the main sources of groundwater salinization, hardness and microbiological contamination of the study area.     

电解浮选用于活性污泥固液分离及其动力学研究

在装有Ti/RuO2-IrOz-TiO2阳极、Ti阴极的电解浮选槽中进行了活性污泥固液分离的研究.考察了水力停留时间对浮选效果的影响,研究了电解产生的微气泡对悬浮物浮选的动力学.研究表明,电解浮选是高效的固液分离单元,悬浮物的去除遵循一级动力学模型.     

Estimation of the accumulation rates and health risks of heavy metals in residential soils of three metropolitan cities in China

Heavy metal concentrations in urban soils are likely to increase over time because of continuous urbanization and heavy metal emissions. To estimate the accumulation rates of heavy metals in urban soils, we collected soil samples from residential areas with different building ages in the metropolitan cities of Shanghai, Shenzhen, and Beijing, China. Heavy metal concentrations in the soils varied among the cities and were primarily affected by soil parent material and the intensity of anthropogen...