Disease suppression on greenhouse tomatoes using plant waste compost

This study investigated the disease suppression abilities of a compost amendment that was added to the conventional growing medium, yellow cedar sawdust, used in most British Columbia vegetable greenhouses. The compost amendment was produced in a controlled, in-vessel process primarily from greenhouse crop waste materials. The pathogen and cultivar under study were Fusarium oxysporum f. sp. radicis-lycopersici (FORL) on Dombito (FORL-susceptible) beefsteak greenhouse tomatoes. Significant reduction of Fusarium crown and root rot was also realized in tomato seedlings by applying compost amendment from several different batches, as a seed cover or plug substitute. In a greenhouse trial, disease suppression using a mixture of 2:1 sawdust to amendment by volume was shown to be most effective. As a result, the tomato yield over a nine-month growing season was improved by 74% where the medium was deliberately infested with FORL.     

Results and evaluation of the first study of organochlorine contaminants (PCDDs, PCDFs, PCBs and DDTs), heavy metals and metalloids in birds from Baja California, México

Organochlorine compounds (OCs) including polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), polychlorinated biphenyls (PCBs) and 1,1-dichloro-2,2-bis(p-chlorophenyl)ethylene (p-p'-DDE), heavy metals (Pb, Cd, Zn, Cu), and arsenic were measured in house sparrows (Passer domesticus) and common ground doves (Columbina passerina) from Baja California Sur, México. Concentrations of PCDD/Fs were low, with 21 pg/g for house sparrows, and 7.7 pg/g for common ground doves. Non-ortho-PCB concentrations in house sparrow and common ground doves were 58 and 254 pg/g, respectively, and are within the highest concentrations reported in species that are in the low levels of food webs. The major differences in organochlorine levels between species were found for ortho-PCBs and DDTs. ortho-PCB levels were higher in the seedeater species, whereas DDT levels were higher in the omnivorous species. Heavy metal levels were far below those associated with negative effects.     

Modelling the transport of suspended particulate matter by the Rhone River plume (France). Implications for pollutant dispersion

A model to simulate the transport of suspended particulate matter by the Rhone River plume has been developed. The model solves the 3D hydrodynamic equations, including baroclinic terms and a 1-equation turbulence model, and the suspended matter equations including advection/diffusion of particles, settling and deposition. Four particle classes are considered simultaneously according to observations in the Rhone. Computed currents, salinity and particle distributions are, in general, in good agreement with observations or previous calculations. The model also provides sedimentation rates and the distribution of different particle classes over the sea bed. It has been found that high sedimentation rates close to the river mouth are due to coarse particles that sink rapidly. Computed sedimentation rates are also similar to those derived from observations. The model has been applied to simulate the transport of radionuclides by the plume, since suspended matter is the main vector for them. The radionuclide transport model, previously described and validated, includes exchanges of radionuclides between water, suspended matter and bottom sediment described in terms of kinetic rates. A new feature is the explicit inclusion of the dependence of kinetic rates upon salinity. The model has been applied to 137Cs and 239,240Pu. Results are, in general, in good agreement with observations.     

Clonal variation in heavy metal accumulation and biomass production in a poplar coppice culture. II. Vertical distribution and phytoextraction potential

Short rotation coppice cultures (SRC) are intensively managed, high-density plantations of multi-shoot trees. In April 1996, an SRC field trial with 17 different poplar clones was established in Boom (Belgium) on a former waste disposal site. In December 1996 and January 2001, all shoots were cut back to a height of 5 cm to create a coppice culture. For six clones, wood and bark were sampled at the bottom, middle and top of a shoot in August and November 2002. No significant height effect of metal concentration was found, but for wood, metal concentrations generally increased toward the top of the shoot in August, and decreased toward the top of the shoot in November. Phytoextraction potential of a clone was primarily determined by metal concentration and by biomass production. Shoot size and number of shoots per stool were less important, as a high biomass production could be achieved by producing a few large shoots or many smaller shoots. Clone Fritzi Pauley accumulated 1.4 kg ha(-1) of Al over two years; Wolterson and Balsam Spire showed a relatively high accumulation of Cd and Zn, i.e. averaging, respectively 47 and 57 g ha(-1) for Cd and 2.4 and 2.0 kg ha(-1) for Zn over two years.     

Lead biosorption and desorption by intact and pretreated spirulina maxima biomass

In order to search for locally available and untried biomaterials in China with high removal capacity of heavy metals from wastewater, the feasibility of Spirulina maxima as biosorbent for lead removal and recovery from aqueous solution was investigated. The lead biosorption was studied by using intact biomass and pretreated biomass of S. maxima. The effects of operational conditions (e.g. pH, contact time, biomass concentration etc.) on lead biosorption were investigated. The biosorption was solution pH dependent and the maximum adsorption was obtained at a solution pH of about 5.5. The adsorption equilibrium was reached in 60 min. The biosorption followed the Freundlich isotherm model. The maximum removal ratios of lead were about 84% in intact biomass and 92% in pretreated biomass. The lead adsorbed could be desorbed effectively by 0.1 M nitric acid, EDTA and hydrochloric acid. The results in this study indicated that pretreated biomass of S. maxima was a promising candidate for removing lead from wastewater.     

In-field measurements of PCDD/F emissions from domestic heating appliances for solid fuels

Within this project the emissions into the atmosphere of polychlorinated dibenzo-p-dioxins and -furans (PCDD/F) of 30 domestic heating appliances in Austrian households were tested. The appliances were single stoves (kitchen stove, continuous burning stove and tiled stove) and central heating boilers for solid fuels up to a nominal heat input of 50 kW. A main objective of this survey was to determine the PCDD/F emissions of domestic heating units under routine conditions. Therefore, the habitual combustion conditions used by the operators were not influenced. The original fuels and lightning supports were used and the operation of the units was carried out by the householders according to their usual practice. The data obtained were used to calculate in-field PCDD/F-emission factors. Most of the appliances have shown PCDD/F emissions within a concentration range of 0.01-0.3 ng TEQ/MJ. Modern fan-assisted wood heating boilers with afterburning and units for continuously burning of wood chips and wood pellets had the lowest emissions. High emissions were caused by unsuitable heating habits such as combustion of wastes and inappropriate operation of the appliances. There were only small differences between single stoves and central heating boilers or between wood and coal-fired appliances. The emission factors calculated are higher than those cited in literature, which are mainly derived from trials on test stands under laboratory conditions.     

The interaction effects of binary mixtures of benzene and toluene on the developing heart of medaka (Oryzias latipes)

The United States Environmental Protection Agency (USEPA) has pursued the estimation of risk of adverse health effects from exposure to chemical mixtures since the early 1980s. Methods used to calculate risk estimates of mixtures were often based on single chemical information that required assumptions of dose-addition or response-addition and did not consider possible changes in response due to interaction effects among chemicals. Full factorial designs for laboratory studies can produce interactions information, but these are expensive to perform and may not provide the information needed to evaluate specific environmentally relevant mixtures. In this research, groups of Japanese medaka (Oryzias latipes) embryos were exposed to binary mixtures of benzene and toluene as well as to each of these chemicals alone. Endpoint specific dose-response models were built for the hydrocarbon mixture under an assumption of dose-additivity, using the single chemical dose-response information on benzene and toluene. The endpoints included heart rate, heart rate progression, and lethality. Results included a synergistic response for heart rate at 72 h of development, and either additivity or antagonism for all other endpoints at 96 h of development. This work uses an established statistical method to evaluate the toxicity of an environmentally relevant mixture to ascertain whether interaction effects are occurring, thus providing additional information on toxicity.     

The use of a sequential leaching procedure for heavy metal fractionation in green liquor dregs from a causticizing process at a pulp mill

A five-stage sequential leaching procedure was used to fractionate heavy metals (Cd, Cu, Pb, Cr, Zn, Fe, Mn, Ni, Co, As, V, Ba and Ti) in green liquor dregs into the following fractions: (1) water-soluble fraction (H2O), (2) exchangeable fraction (CH3COOH), (3) easily reduced fraction (HONH3Cl), (4) oxidizable fraction (H2O2 + CH3COONH4), and (5) residual fraction (HF + HNO3 + HCl). The green liquor dregs were derived from a causticizing process at a pulp mill at Kemi, Northern Finland. According to the leaching studies, the leachability of heavy metals in the water-soluble fraction varied between 0.5 and 2 mg kg(-1) expressed on a dry weight (d.w.) basis, indicating relatively low bioavailability of the metals. However, the concentration of Mn (2065 mg kg(-1); d.w.) showed a strong and of Zn (17.6 mg kg(-1); d.w.), Ni (39.7 mg kg(-1); d.w.) and Ba (32.0 mg kg(-1); d.w.) slightly tendency to be extracted in the exchangeable fraction. In addition, Zn, Mn, Ni, Co, V and Ba showed clear leachability in the easily reduced fraction, as well as Cd, Cu, Cr, Zn, Mn, As and Ba in the oxidizable fraction. For Cd, Cu, Cr, Zn, Mn, Ni, Co, Ba and Ti, the sum of leachable heavy metal concentrations in fractions 1-5 agreed relatively well with the "total" heavy metal concentrations. Recoveries of the sum of fractions 1-5 were 84-56% of those obtained by the US EPA method 3052 (i.e. concentrations obtained after microwave oven digestion with a mixture of HF and HNO3).     

Halogenated compounds in a dated sediment core of the Teltow Canal, Berlin: time related sediment contamination

To study the recent contamination history of DDT (1,1,1-trichloro-2,2-bis(chlorophenyl)ethane) and its metabolites, as well as methoxychlor (1,1,1-trichloro-2,2-bis(p-methoxyphenyl)ethane), chlorfenson (4-chlorophenyl-p-chlorobenzenesulfonate), and further halogenated aromatics, a sediment core was collected from the Teltow Canal in Berlin (Germany). The sampling site is located nearby a former industrial point source, where recently analyses on pre-samples have indicated high concentrations of halogenated organic compounds. The deposition time of the investigated sediments was determined by gamma-spectrometrical dating. Pollution trends of selected contaminants were attributed to a time period between 5 and 10 years. Concentration profiles reflect not only the recent pollution history of these compounds, but also the time-depending effects of the ban, restriction and termination of DDT-production in the German Democratic Republic (GDR). DDT and other chlorinated aromatic compounds were produced onsite until the late 1980s. Maximum values of 133 mg kg(-1) (dry weight) for p,p'-DDD (1,1-dichloro-2,2-bis(chlorophenyl)ethane) and approximately 100 mg kg(-1) (dry weight) for p,p'-DDMS (1-chloro-2,2-bis(chlorophenyl)ethane), main metabolites of the anaerobic degradation of DDT, were determined. The occurrence of all selected contaminants, most of which have been banned more than 10 years ago, demonstrate recent contamination pathways, and the necessity of a continuous long-term monitoring of the affected environment.