Assessing the Influence of Social Responsibility on Reputation: An Empirical Case-Study in Agricultural Cooperatives in Spain

The attention to ethics has gradually become a concurrent topic of modern companies’ management. In the last years Social Responsibility has become a key issue in the strategic agenda of competitive agriculture cooperatives. However, reputation management has not been a visible strength in the cooperative enterprises. First of all, this work theoretically analyzes the relationship between Social Responsibility and reputation in cooperatives. Later, from a practical point of view, we carry on an empirical analysis focused on the olive oil cooperatives in the south of Spain, in the province of Jaén. With respect to the previous studies on the topic, this work reveals a main reason of interest reinforcing the role of research in addressing real problems of cooperatives. The article points out the characteristics of this kind of agribusiness and shows the importance of the adoption of a responsible orientation in fostering reputation for creating sustainable competitive advantages.     

Effects of fly ash addition on physical properties of porous clay-fly ash composites via polymeric replica technique

The porous composites of clay and fly ash have the potential to be used in many fields, such as catalyst support and gas adsorbents. In this study, various ratios of fly ash (1–2) with different percentage of suspension (50–70 wt%) were applied to produce porous clay-fly ash composites via polymeric replica technique. Fabrication process starts by mixing clay and fly ash in distilled water to form slurry. The process is followed by fully immersing polymer sponge in slurry. The excess slurry is then removed through squeezing. Finally, the sponge coated with slurry is sintered at 500 and 1250 °C for 1 h. It is found that the compressive strength of porous composites improves significantly (0.178–1.28 MPa) when the amount of clay-fly ash suspension mixture (50–70 wt%) increases. The compressive strength of porous composites is mainly attributed to the mullite, quartz and amorphous phase formations. These results are supported by X-ray diffraction analysis. On the other hand, increase in the amount of suspension reduces the apparent density (from 2.44 to 2.32 g/cm³) and porosity (from 97 to 85 %). The reduction in apparent density is believed to be caused by the presence of high fly ash content in porous composites. The melted fly ash cenospheres have closed the internal pores and increased density of samples. Higher suspension level not only reduces porosity, but also increases close pores of the porous composites. The results are justified through the observation from the structures of porous clay-fly ash composites.     

Thermotolerant coliform loadings to coastal areas of Santa Catarina (Brazil) evidence the effect of growing urbanisation and insufficient provision of sewerage infrastructure

Thermotolerant coliform (TC) loadings were quantified for 49 catchments draining into the North and South Bays of Santa Catarina (SC, southeastern Brazil), an area known for its tourism and aquaculture. TC loadings were calculated based on flow measurements taken in 26 rivers. TC concentrations ere quantified based on surface water samples collected at 49 catchment outlets in 2012 and 2013. Median TC loads ranged from 3.7 × 10³ to 6.8 × 10⁸ MPN s^?1. TC loadings in the catchments increased in proportion to increases in resident human population, population density and percentage of urbanised area. Catchments with more than 60% of area covered by wastewater collection and treatment systems had higher TC loads per person than catchments with less than 25%. Based on the study catchments, these results indicate that current sewerage infrastructure is ineffective in reducing contamination of faecal origin to surface waters. These findings have important implications for the management of microbiological health hazards in bathing, recreational and shellfish aquaculture waters in the North and South Bays of Santa Catarina Island.     

Drivers of Seabird Population Recovery on New Zealand Islands after Predator Eradication

Eradication of introduced mammalian predators from islands has become increasingly common, with over 800 successful projects around the world. Historically, introduced predators extirpated or reduced the size of many seabird populations, changing the dynamics of entire island ecosystems. Although the primary outcome of many eradication projects is the restoration of affected seabird populations, natural population responses are rarely documented and mechanisms are poorly understood. We used a generic model of seabird colony growth to identify key predictor variables relevant to recovery or recolonization. We used generalized linear mixed models to test the importance of these variables in driving seabird population responses after predator eradication on islands around New Zealand. The most influential variable affecting recolonization of seabirds around New Zealand was the distance to a source population, with few cases of recolonization without a source population ≤25 km away. Colony growth was most affected by metapopulation status; there was little colony growth in species with a declining status. These characteristics may facilitate the prioritization of newly predator‐free islands for active management. Although we found some evidence documenting natural recovery, generally this topic was understudied. Our results suggest that in order to guide management strategies, more effort should be allocated to monitoring wildlife response after eradication. Conductores de la Recuperación de Poblaciones de Aves Marinas en Islas de Nueva Zelanda después de la Erradicación de Depredadores     

Soil C and N models that integrate microbial diversity

Industrial agriculture is yearly responsible for the loss of 55–100 Pg of historical soil carbon and 9.9 Tg of reactive nitrogen worldwide. Therefore, management practices should be adapted to preserve ecological processes and reduce inputs and environmental impacts. In particular, the management of soil organic matter (SOM) is a key factor influencing C and N cycles. Soil microorganisms play a central role in SOM dynamics. For instance, microbial diversity may explain up to 77 % of carbon mineralisation activities. However, soil microbial diversity is actually rarely taken into account in models of C and N dynamics. Here, we review the influence of microbial diversity on C and N dynamics, and the integration of microbial diversity in soil C and N models. We found that a gain of microbial richness and evenness enhances soil C and N dynamics on the average, though the improvement of C and N dynamics depends on the composition of microbial community. We reviewed 50 models integrating soil microbial diversity. More than 90 % of models integrate microbial diversity with discrete compartments representing conceptual functional groups (64 %) or identified taxonomic groups interacting in a food web (28 %). Half of the models have not been tested against an empirical dataset while the other half mainly consider fixed parameters. This is due to the difficulty to link taxonomic and functional diversity.     

Effects of pharmaceuticals and personal care products on marine organisms: from single-species studies to an ecosystem-based approach

Pharmaceuticals and personal care products (PPCPs) are contaminants of emerging concern that are increasing in use and have demonstrated negative effects on aquatic organisms. There is a growing body of literature reporting the effects of PPCPs on freshwater organisms, but studies on the effects of PPCPs to marine and estuarine organisms are limited. Among effect studies, the vast majority examines subcellular or cellular effects, with far fewer studies examining organismal- and community-level effects. We reviewed the current published literature on marine and estuarine algae, invertebrates, fish, and mammals exposed to PPCPs, in order to expand upon current reviews. This paper builds on previous reviews of PPCP contamination in marine environments, filling prior literature gaps and adding consideration of ecosystem function and level of knowledge across marine habitat types. Finally, we reviewed and compiled data gaps suggested by current researchers and reviewers and propose a multi-level model to expand the focus of current PPCP research beyond laboratory studies. This model includes examination of direct ecological effects including food web and disease dynamics, biodiversity, community composition, and other ecosystem-level indicators of contaminant-driven change.     

Archaeometric researches on the provenance of Mediterranean Archaic Phoenician and Punic pottery

The aim of this study is to setup a first chemical database that could represent the starting point for a reliable classification method to discriminate between Archaic Phoenician and Punic pottery on the base of their chemical data. This database up to now can discriminate between several different areas of production and provenance and can be applied also to unknown ceramic samples of comparable age and production areas. More than 100 ceramic fragments were involved in this research, coming from various archaeological sites having a crucial importance in the context of the Phoenician and Punic settlement in central and western Mediterranean: Carthage (Tunisia), Toscanos (South Andalusia, Spain), Sulci, Monte Sirai, Othoca, Tharros (Sardinia, Italy) and Pithecusa (Campania, Italy). Since long-time archaeologists hypothesised that Mediterranean Archaic Phoenician and Punic pottery had mainly a local or just a regional diffusion, with the exception of some particular class like transport amphorae. To verify the pottery provenance, statistical analyses were carried out to define the existence of different ceramic compositional groups characterised by a local origin or imported from other sites. The existing literature data are now supplemented by new archaeometric investigations both on Archaic Phoenician ceramics and clayey raw materials from Sardinia. Therefore, diffractometric analyses, optical microscopy observations and X-ray fluorescence analyses were performed to identify the mineralogical and chemical composition of Othoca ceramics and clayey raw material. The obtained results were then compared with own literature data concerning Phoenician and Punic pottery in order to find features related to the different ceramic productions and their provenance. Principal component analysis (PCA) and hierarchical cluster analysis (HCA) were also performed on the chemical compositional data in order to discriminate ceramic groups. A very complex situation was found: imported ceramics coming from Carthage, with a large-scale distribution, were found together with a predominant local production pottery. The archaeometric results demonstrate that historical and typological approach has to be supported by scientific analyses to better understand local or Mediterranean exchanges.     

Case study of landfill leachate recirculation using small-diameter vertical wells

A case study of landfill liquids addition using small diameter (5 cm) vertical wells is reported. More than 25,000 m³ of leachate was added via 134 vertical wells installed 3 m, 12 m, and 18 m deep over five years in a landfill in Florida, US. Liquids addition performance (flow rate per unit screen length per unit liquid head) ranged from 5.6 × 10^?8 to 3.6 × 10^?6 m³ s^?1 per m screen length per m liquid head. The estimated radial hydraulic conductivity ranged from 3.5 × 10^?6 to 4.2 × 10^?4 m s^?1. The extent of lateral moisture movement ranged from 8 to 10 m based on the responses of moisture sensors installed around vertical well clusters, and surface seeps were found to limit the achievable liquids addition rates, despite the use of concrete collars under a pressurized liquids addition scenario. The average moisture content before (51 samples) and after (272 samples) the recirculation experiments were 23% (wet weight basis) and 45% (wet weight basis), respectively, and biochemical methane potential measurements of excavated waste indicated significant (p < 0.025) decomposition.