Review and assessment of models used to predict the fate of radionuclides in lakes

A variety of models for predicting the behaviour of radionuclides in fresh water ecosystems have been developed and tested during recent decades within the framework of many international research projects. These models have been implemented in Computerised Decision Support Systems (CDSS) for assisting the appropriate management of fresh water bodies contaminated by radionuclides. The assessment of the state-of-the-art and the consolidation of these CDSSs has been envisaged, by the scientific community, as a primary necessity for the rationalisation of the sector. The classification of the approaches of the various models, the determination of their essential features, the identification of similarities and differences among them and the definition of their application domains are all essential for the harmonisation of the existing CDSSs and for the possible development and improvement of reference models that can be widely applied in different environmental conditions. The present paper summarises the results of the assessment and evaluation of models for predicting the behaviour of radionuclides in lacustrine ecosystems. Such models were developed and tested within major projects financed by the European Commission during its 4th Framework Programme (1994-1998). The work done during the recent decades by many modellers at an international level has produced some consolidated results that are widely accepted by most experts. Nevertheless, some new results have arisen from recent studies and certain model improvements are still necessary.     

Production of radioactive particles for use in environmental studies

This paper presents an aerosol generation technique developed to produce dry aerosol particles of various sizes from aqueous solutions of salt. The technique was tested with sodium chloride, lithium carbonate and uranyl acetate at various aqueous concentrations which produced particles in the size range of 0.13-1.37 microm Mass Median Diameter (MMD). The generated aerosols were acceptably monodisperse with a geometric standard deviation of 1.4-2. Both MMD and Mass Median Aerodynamic Diameter (MMAD) increased significantly (p<0.001) with increased concentration of the salt in solution. The technique can also be used to generate aerosols of different chemical species. The results obtained indicate that the system is convenient for use with various aerosol-forming materials, with a stable particle size distribution being maintained for a long period of steady operation. The technique was successfully applied in wind tunnel studies to simulate the release of submicron radioactive particles and their interception by crops, grass and tree canopies. The relevance and application of the technique in other areas of environmental assessment studies is discussed.     

Photoelectrocatalytic degradation of 4-chlorophenol and oxalic acid on titanium dioxide electrodes

Photocatalytically active thin TiO(2) films were produced by spin-coating or dip-coating an alkoxy precursor onto a transparent conducting electrode substrate and by thermal oxidation of titanium metal. The thin films were used to study the photoelectrocatalytic or photoelectrochemical degradation of oxalic acid and 4-chlorophenol (4-CP) under near UV (monochromatic, 365 nm) light irradiation. Degradation was monitored by a variety of methods. In the course of oxalic acid degradation, CO(2) formation accounted for up to 100% of the total organic carbon degradation for medium starting concentrations; for the degradation of 4-CP, less CO(2) was detected due to the higher number of oxidation steps, i.e. intermediates. Incident-photon-to-current conversion efficiency, educt degradation and product formation as well as Faradaic efficiencies were calculated for the degradation experiments. Quantum yields and Faradaic efficiencies were found to be strongly dependent on concentration, with maximum values (quantum yield) around 1 for the highest concentrations of oxalic acid.     

Experimental approaches for size-based metal speciation in rivers

A review of the different methodologies employed to fractionate and characterize riverine suspended particulate matter is presented. The importance of size-based metal speciation is underlined and the possibility of studying it by the Sedimentation Field Flow Fractionation (SdFFF) technique is illustrated. The studies on the metal load in river Suspended Particulate Matter (SPM) performed over the last ten years are critically reviewed focusing on the different methods employed to collect, concentrate and size-fractionate samples. The fact that there is no homogeneity in methods and data collection in this field is underlined. Among the different fractionation techniques, Field Flow Fractionation (FFF) methodologies have proved to be a good approach to study the role of SPM in metal load and transport. The possibility of studying size-based metal speciation using the SdFFF technique is presented and the importance of metal speciation in rivers is underlined.     

Organochlorine pollutants in remote mountain lake waters

Hexachlorocyclohexanes (HCHs; alpha- and gamma-isomers), endosulfans (alpha- and beta-isomers and the sulfate residue), hexachlorobenzene (HCB), dichlorodiphenyltrichloroethane (DDTs), and polychlorobiphenyls (PCBs) were measured in waters from three European remote mountain lakes situated in the Alps, Pyrenees, and Caledonian mountains. Sampling encompassed both ice-free and ice-covered periods at different water column depths. High HCH concentrations were found in all lakes, those in the Alps and Pyrenees (990-2,900 pg/L) being among the highest recorded in continental waters. Endosulfans and endosulfan sulfate (120-1,150 pg/L) were the second major group of organochlorine contaminants, showing a remarkable stability upon atmospheric long-range transport. The concentrations of HCB, DDTs, and PCB (4-8, 0.6-16, and 26-110 pg/L, respectively) were low in comparison with other continental waters. Hexachlorocyclohexanes, endosulfans, and HCB were essentially found in the dissolved phase. Phase partitioning of the more hydrophobic compounds exhibited a dependence on temperature and water-suspended particles. Comparison between different sampling seasons and water depths indicated a remarkable concentration uniformity within lake, but major interlake differences. Normalization to turnover rates showed higher interlake similarity. Preferential accumulation of the less volatile compounds in the Alp lake and significant increase of baseline contributions of organochlorine compounds and residues in the Caledonian lake are also evidenced from these turnover rates.     

Olfactory response to mushroom composting emissions as a function of chemical concentration

Odor pollution is a major problem facing mushroom [Agaricus bisporus (Lange) Imbach] compost production. Techniques for quantifying mushroom composting odors are needed to assess the effectiveness of odor control measures. Odor samples were obtained in nalophane bags from 11 mushroom composting sites. Samples were collected 0.2 m downwind from the pre-wetting heaps (aerated or unaerated) of raw composting ingredients (wheat straw, poultry and horse manures, and gypsum) and subsequent Phase I composting windrows or aerated tunnels. The odor concentrations (OCs) of the samples were assessed using serial dilution olfactometry and the chemical composition of the samples was determined using gas chromatography-mass spectrometry (GC-MS), both 24 h after sampling. Gas detector tubes were used for on-site measurement of gaseous compounds. Odorants that exceeded their published olfactory detection thresholds by the greatest order of magnitude, in decreasing order, were: H2S, dimethyl sulfide (DMS), butanoic acid, methanethiol, and trimethylamine. Concentrations of NH3 were not significantly correlated with OC, and they were not significantly affected by the use of aeration. Aeration reduced the OC and the combined H2S + DMS concentrations by 87 and 92%, respectively. There was a very close correlation (r = 0.948, P < 0.001) between the OC of bag samples and the combined H2S + DMS concentrations, measured on-site with detector tubes. This relationship was unaffected by the NH3 concentration or the type of compost: aerated or unaerated, pre-wet or Phase I, poultry manure-based or horse and poultry manure-based compost. Prediction of the OC will enable rapid and low-cost identification of odor sources on mushroom composting sites.     

Removal of herbicides from liquid media by fungi isolated from a contaminated soil

Fungi were isolated from soil samples corresponding to pesticide-contaminated soil (CS) and noncontaminated soil (NCS) in the Annaba vicinity (Algeria) and identified. The number of isolates obtained from CS and NCS were 263 and 288, respectively. The most frequent species (Aspergillus fumigatus, A. niger, A. terreus, Absidia corymbifera, and Rhizopus microsporus var microsporus) were not sensitive to the pesticides. The growth of the genus Trichoderma was inhibited by the pesticides, while genera Absidia and Fusarium were stimulated. The 53 species isolated were assayed for their ability to remove metribuzin from liquid medium. Only Botrytis cinerea from NCS and Sordaria superba and Absidia fusca from CS removed more than 50% of the compound after 5 d. Metamitron was very resistant. Among the 21 species tested, only Alternaria solani (from NCS), Drechslera australiensis (from CS and NCS), and Absidia fusca (from CS) reduced the concentration in the medium more than 10% (10-16%). Twelve species were grown with linuron, seven of them were inefficient in removing this compound. The two strains of Sordaria macrospora yielded 22 to 25% depletion, while Botrytis cinerea depleted linuron almost completely. Among the 31 species assayed for their ability to eliminate metobromuron, Botrytis cinerea (from CS and NCS) depleted almost completely the chemical from the medium. Rhizopus oryzae and Absidia fusca from CS removed 40 and 47% of the compound, respectively. No systematic relationships were observed between the soil contamination and herbicide elimination capacities of soil fungi. Absidia fusca and Botrytis cinerea were particularly interesting for bioremediation purposes because they were able to transform efficiently three of the four compounds assayed.     

What Is a Good Public Participation Process? Five Perspectives from the Public

It is now widely accepted that members of the public should be involved in environmental decision-making. This has inspired many to search for principles that characterize good public participation processes. In this paper we report on a study that identifies discourses about what defines a good process. Our case study was a forest planning process in northern New England and New York. We employed Q methodology to learn how participants characterize a good process differently, by selecting, defining, and privileging different principles. Five discourses, or perspectives, about good process emerged from our study. One perspective emphasizes that a good process acquires and maintains popular legitimacy. A second sees a good process as one that facilitates an ideological discussion. A third focuses on the fairness of the process. A fourth perspective conceptualizes participatory processes as a power struggle—in this instance a power play between local landowning interests and outsiders. A fifth perspective highlights the need for leadership and compromise. Dramatic differences among these views suggest an important challenge for those responsible for designing and carrying out public participation processes. Conflicts may emerge about process designs because people disagree about what is good in specific contexts.     

A note on the use of the analytic hierarchy process for environmental impact assessment

Environmental impact assessment (EIA) is an intrinsically complex multi-dimensional process, involving multiple criteria and multiple actors. Multi-criteria methods can serve as useful decision aids for carrying out the EIA. This paper proposes the use of a multi-criteria technique, namely the analytic hierarchy process (AHP), for the purpose. AHP has the flexibility to combine quantitative and qualitative factors, to handle different groups of actors, to combine the opinions expressed by many experts, and can help in stakeholder analysis. The main shortcomings of AHP and some modifications to it to overcome the shortcomings are briefly described. Finally, the use of AHP is illustrated for a case study involving socio-economic impact assessment. In this case study, AHP has been used for capturing the perceptions of stakeholders on the relative severity of different socio-economic impacts, which will help the authorities in prioritizing their environmental management plan, and can also help in allocating the budget available for mitigating adverse socio-economic impacts.     

Quantifying Forest Visibility with Spatial Data

We use spatial data representing transportation networks, elevation, stand height, and recreation use to construct and compare models of recreation use patterns and visibility in a forest. The recreation use pattern model depicts use frequencies along travel corridors. The visibility model quantifies visibility for all forest areas. We find that the models provide different but complementary types of information. Forest managers who are involved in scheduling harvest operations and want to address the visual concerns of forest visitors may benefit most from the visibility model. Managers who wish to know more about travel patterns or to reroute forest visitors affected by operations may benefit from the use pattern model. A combination of the two models has the highest potential for providing planning assistance in multiple-use forests. Both models may be able to enhance visual resource management (VRM) systems already in use by providing spatially explicit recreation use and visibility data.