Respiration and lipid content of the Arctic copepod<Emphasis Type="Italic"> Calanus hyperboreus</Emphasis> overwintering 1 m above the seafloor at 2,300 m water depth in the Fram Strait

In August 2000 high concentrations of the dominant herbivorous copepod Calanus hyperboreus were detected in the Arctic Fram Strait, west of Spitsbergen, 1 m above the seafloor at 2,290 m water depth. Individuals from that layer were sampled by a hyper-benthic net attached to the frame of an epi-benthic sledge. For comparison, the vertical distribution of C. hyperboreus in the water column was studied simultaneously by a multiple opening/closing net haul from 2,250 m depth to the surface. Maximum abundance was found close to the surface with 6.6 and 10.0 ind. m^?3 at 0–50 m and 50–100 m depth, respectively. However, the major fraction of the population (>40%) occurred between 1,000 and 1,500 m depth. In the deepest layer (2,000–2,250 m) abundance measured 2.2 ind. m^?3 and was twice as high as between 100 and 1,000 m depth. In comparison to individuals from surface waters, copepods from the hyper-benthic layer were torpid and did not react to mechanical stimuli. Stage CV copepodids and females from the deep sample contained 4–10% less lipid and showed significantly reduced respiration rates of 0.24 and 0.26 ml O₂ h^?1 g^?1 dry mass (DM) as compared to surface samples (0.49 and 0.43 ml O₂ h^?1 g^?1 DM). All these observations indicate that the hyper-benthic part of the population had already started a dormant overwintering phase at great depth. Based on the lipid deposits and energy demands, the potential maximum duration of the non-feeding dormant phase was estimated at 76–110 days for females and at 98–137 days for CV copepodids, depending on what indispensable minimum lipid content was assumed. In any case, the estimated times could not meet the necessary requirements for a starvation period of >6 months until the next phytoplankton bloom in the following spring. The ecological implications of these results are discussed with respect to the life cycle and eco-physiological adaptations of C. hyperboreus to its high-Arctic habitat.     

Increased bioavailability of metals in two contrasting agricultural soils treated with waste wood-derived biochar and ash

Recycled waste wood is being increasingly used for energy production; however, organic and metal contaminants in by-products produced from the combustion/pyrolysis residue may pose a significant environmental risk if they are disposed of to land. Here we conducted a study to evaluate if highly polluted biochar (from pyrolysis) and ash (from incineration) derived from Cu-based preservative-treated wood led to different metal (e.g., Cu, As, Ni, Cd, Pb, and Zn) bioavailability and accumulation in sunflower (Helianthus annuus L.). In a pot experiment, biochar at a common rate of 2 % w/w, corresponding to ～50 t ha^?1, and an equivalent pre-combustion dose of wood ash (0.2 % w/w) were added to a Eutric Cambisol (pH 6.02) and a Haplic Podzol (pH 4.95), respectively. Both amendments initially raised soil pH, although this effect was relatively short-term, with pH returning close to the unamended control within about 7 weeks. The addition of both amendments resulted in an exceedance of soil Cu statutory limit, together with a significant increase of Cu and plant nutrient (e.g., K) bioavailability. The metal-sorbing capacity of the biochar, and the temporary increase in soil pH caused by adding the ash and biochar were insufficient to offset the amount of free metal released into solution. Sunflower plants were negatively affected by the addition of metal-treated wood-derived biochar and led to elevated concentration of metals in plant tissue, and reduced above- and below-ground biomass, while sunflower did not grow at all in the Haplic Podzol. Biochar and ash derived from wood treated with Cu-based preservatives can lead to extremely high Cu concentrations in soil and negatively affect plant growth. Identifying sources of contaminated wood in waste stream feedstocks is crucial before large-scale application of biochar or wood ash to soil is considered.     

Pollutant concentration profile reconstruction using digital soft sensors for biodegradation and exposure assessment in the presence of model uncertainty

A new approach to the problem of environmental hazard assessment and monitoring for pollutant biodegradation reaction systems in the presence of uncertainty is proposed using soft sensor-based pollutant concentration dynamic profile reconstruction techniques. In particular, a robust reduced-order soft sensor is proposed that can be digitally implemented in the presence of inherent complexity and the inevitable model uncertainty. The proposed method explicitly incorporates all the available information associated with a process model characterized by varying degrees of uncertainty, as well as available sensor measurements of certain physicochemical quantities. Based on the above information, a reduced-order soft sensor is designed enabling the reliable reconstruction of pollutant concentration profiles in complex biodegradation systems that can not be always achieved due to physical and/or technical limitations associated with current sensor technology. The option of using the aforementioned approach to compute toxic load and persistence indexes on the basis of the reconstructed concentration profiles is also pursued. Finally, the performance of the proposed method is evaluated in two illustrative environmental hazard assessment case studies.     

Using long-term data for a reintroduced population to empirically estimate future consequences of inbreeding

Inbreeding depression is an important long-term threat to reintroduced populations. However, the strength of inbreeding depression is difficult to estimate in wild populations because pedigree data are inevitably incomplete and because good data are needed on survival and reproduction. Predicting future population consequences is especially difficult because this also requires projecting future inbreeding levels and their impacts on long-term population dynamics, which are subject to many uncertainties. We illustrate how such projections can be derived through Bayesian state-space modeling methods based on a 26-year data set for North Island Robins (Petroica longipes) reintroduced to Tiritiri Matangi Island in 1992. We used pedigree data to model increases in the average inbreeding level (F ) over time based on kinship of possible breeding pairs and to estimate empirically N_e/N (effective/census population size). We used multiple imputation to model the unknown components of inbreeding coefficients, which allowed us to estimate effects of inbreeding on survival for all 1458 birds in the data set while modeling density dependence and environmental stochasticity. This modeling indicated that inbreeding reduced juvenile survival (1.83 lethal equivalents [SE 0.81]) and may have reduced subsequent adult survival (0.44 lethal equivalents [0.81]) but had no apparent effect on numbers of fledglings produced. Average inbreeding level increased to 0.10 (SE 0.001) as the population grew from 33 (0.3) to 160 (6) individuals over the 25 years, giving a ratio of 0.56 (0.01). Based on a model that also incorporated habitat regeneration, the population was projected to reach a maximum of 331–1144 birds (median 726) in 2130, then to begin a slow decline. Without inbreeding, the population would be expected stabilize at 887–1465 birds (median 1131). Such analysis, therefore, makes it possible to empirically derive the information needed for rational decisions about inbreeding management while accounting for multiple sources of uncertainty.     

Quantifying the squeezing or stretching of fisheries as they adapt to displacement by marine reserves

The designation of no‐take marine reserves involves social and economic concerns due to the resulting displacement of fishing effort, when fishing rights are removed from those who traditionally fished within an area. Displacement can influence the functioning of the fishery and success of the reserve, yet levels of displacement are seldom quantified after reserve implementation and very rarely before that. We devised a simple analytical framework based on set theory to facilitate reserve placement. Implementation of the framework requires maps of fishing grounds, fishing effort, or catch per unit effort for at least 2 years. The framework quantifies the level of conflict that a reserve designation might cause in the fishing sector due to displacement and the opportunities to offset the conflict through fisher spatial mobility (i.e., ability of fishers to fish elsewhere). We also considered how the outputs of the framework can be used to identify targeted management interventions for each fishery. We applied the method in Honduras, where the largest marine protected area in Central America is being placed, for which spatial data on fishing effort were available for 6 fisheries over 3 years. The proposed closure had a greater negative impact on the shrimp and lobster scuba fisheries, which concentrated respectively 28% and 18% of their effort inside the reserve. These fisheries could not accommodate the displacement within existing fishing grounds. Both would be forced to stretch into new fishing grounds, which are available but are of unknown quality. These stakeholders will likely require compensation to offset costly exploratory fishing or to travel to fishing grounds farther away from port.     

Effects of productivity on biodiversity in forest ecosystems across the United States and China

In the global campaign against biodiversity loss in forest ecosystems, land managers need to know the status of forest biodiversity, but practical guidelines for conserving biodiversity in forest management are lacking. A major obstacle is the incomplete understanding of the relationship between site primary productivity and plant diversity, due to insufficient ecosystem‐wide data, especially for taxonomically and structurally diverse forest ecosystems. We investigated the effects of site productivity (the site's inherent capacity to grow timber) on tree species richness across 19 types of forest ecosystems in North America and China through 3 ground‐sourced forest inventory data sets (U.S. Forest Inventory and Analysis, Cooperative Alaska Forest Inventory, and Chinese Forest Management Planning Inventory). All forest types conformed to a consistent and highly significant (P < 0.001) hump‐shaped unimodal relationship, of which the generalized coefficients of determination averaged 20.5% over all the forest types. That is, tree species richness first increased as productivity increased at a progressively slower rate, and, after reaching a maximum, richness started to decline. Our consistent findings suggest that forests of high productivity would sustain few species because they consist mostly of flat homogeneous areas lacking an environmental gradient along which a diversity of species with different habitats can coexist. The consistency of the productivity–biodiversity relationship among the 3 data sets we examined makes it possible to quantify the expected tree species richness that a forest stand is capable of sustaining, and a comparison between the actual species richness and the sustainable values can be useful in prioritizing conservation efforts.     

Empirical Trials of Plant Field Guides

We designed 3 image‐based field guides to tropical forest plant species in Ghana, Grenada, and Cameroon and tested them with 1095 local residents and 20 botanists in the United Kingdom. We compared users’ identification accuracy with different image formats, including drawings, specimen photos, living plant photos, and paintings. We compared users’ accuracy with the guides to their accuracy with only their prior knowledge of the flora. We asked respondents to score each format for usability, beauty, and how much they would pay for it. Prior knowledge of plant names was generally low (<22%). With a few exceptions, identification accuracy did not differ significantly among image formats. In Cameroon, users identifying sterile Cola species achieved 46–56% accuracy across formats; identification was most accurate with living plant photos. Botanists in the United Kingdom accurately identified 82–93% of the same Cameroonian species; identification was most accurate with specimens. In Grenada, users accurately identified 74–82% of plants; drawings yielded significantly less accurate identifications than paintings and photos of living plants. In Ghana, users accurately identified 85% of plants. Digital color photos of living plants ranked high for beauty, usability, and what users would pay. Black and white drawings ranked low. Our results show the potential and limitations of the use of field guides and nonspecialists to identify plants, for example, in conservation applications. We recommend authors of plant field guides use the cheapest or easiest illustration format because image type had limited bearing on accuracy; match the type of illustration to the most likely use of the guide for slight improvements in accuracy; avoid black and white formats unless the audience is experienced at interpreting illustrations or keeping costs low is imperative; discourage false‐positive identifications, which were common; and encourage users to ask an expert or use a herbarium for groups that are difficult to identify. Pruebas Empíricas de Guías de Campo de Plantas Hawthorne, Cable & Marshall     

Development of soil chemical and biological properties in the initial stages of post-mining deposition sites

The aim of this study was to assess the seasonal development of the physicochemical (pH, organic C, organic N, extractable P, Ca²⁺, Mg²⁺) and biological soil properties (microbial biomass, activities of urease, dehydrogenase and alkaline phosphatase) of the topsoil of mine deposition sites that differed based on the material used exclusively for their creation: (a) marlstones, (b) red-grey formations (RGF), and (c) fly ash (FA), during the first year after their creation. Our hypothesis was that all deposition sites, regardless the material they consist of, present equal opportunities for the establishment of spontaneous vegetation. All macronutrients concentrations (P, Ca²⁺, and Mg²⁺) remained constant with time and were found to be higher in the FA sites. Organic C, organic N, all enzyme activities, and microbial biomass were higher in the RGF and marl depositions, with marl sites presenting the highest values. All values of biological variables, with the exception of alkaline phosphatase, increased with time. The alkaline environment along with the slow improvement in soil biological properties of the FA sites seemed to present the most unfavorable conditions for spontaneous vegetation growth. On the contrary, the other two spoil materials presented significant improvement in the initial stages of soil formation in terms of soil functionality.