Effect of chromium on the fatty acid composition of two strains of Euglena gracilis

The effect of hexavalent chromium on fatty acid composition was studied in two strains of Euglena gracilis; UTEX 753 (from the Culture Collection of Algae of Texas University, USA) and MAT (isolated from a highly polluted River). Both were grown in photoauxotrophic and photoheterotrophic conditions and exposed to two metal concentrations, one below and one above IC50. The high malondialdehyde (MDA) levels (3 to 7-fold) obtained with chromium concentration above IC50, suggested the existence of metal-induced lipid peroxidation. Total lipid content increased only with concentration below IC50, whereas it was inhibited by higher metal concentration. Photoheterotrophic control strains exhibited a significantly higher proportion of saturated and polyunsaturated fatty acids. Polyunsaturated acids were most affected by chromium, especially those related to chloroplast structures. Ultra-structure studies showed clear thylakoid disorganization in all treated cells. The results indicate that hexavalent chromium affects levels of fatty acids, especially those related to photosynthetic activity.     

Perfluorinated chemicals in selected residents of the American continent

Perfluorinated chemicals (PFCs) are used in multiple consumer products. Perfluorooctane sulfonic acid (PFOS) and perfluorooctanoic acid (PFOA), the most widely studied PFCs, may be potential developmental, reproductive, and systemic toxicants. Although PFCs seem to be ubiquitous contaminants found both in humans and animals, geographic differences may exist in human exposure patterns to PFCs. We measured 11 PFCs in 23 pooled serum samples collected in the United States from 1990 through 2002, and in serum samples collected in 2003 from 44 residents from Trujillo, Peru. PFOS and PFOA were detected in all the pooled samples; perfluorohexane sulfonic acid (PFHxS) was detected in 21. Median concentrations were 31.1 micrograms per liter (mug/l, PFOS), 11.6 microg/l (PFOA), and 2 microg/l (PFHxS). The 90th percentile concentrations of PFCs in the 44 Peruvian residents were 0.7 microg/l (PFOS), 0.1 microg/l (PFOA), and <0.3 microg/l (PFHxS). The frequencies of detection were 20% (PFOS), 25% (PFOA), and 9% (PFHxS). The frequent detection of selected PFCs in the pooled samples from the United States and the lack of clear concentration trends based on a year of collection suggest a sustained widespread exposure to these compounds among US residents, at least since the 1990s. By contrast, the much lower frequency of detection and concentration ranges of PFCs in Peru suggest a lower exposure of Peruvians to PFCs compared with North Americans. Genetic variability, diet, lifestyle, or a combination of all these may contribute to the different patterns of human exposure to PFCs in the United States and Peru.     

Dip-angle influence on areal DNAPL recovery by co-solvent flooding with and without pre-flooding

A two-dimensional (2D) laboratory model was used to study effects of gravity on areal recovery of a representative dense non-aqueous phase liquid (DNAPL) contaminant by an alcohol pre-flood and co-solvent flood in dipping aquifers. Recent studies have demonstrated that injection of alcohol and co-solvent solutions can be used to reduce in-situ the density of DNAPL globules and displace the contaminant from the source zone. However, contact with aqueous alcohol reduces interfacial tension and causes DNAPL swelling, thus facilitating risk of uncontrolled downward DNAPL migration. The 2D laboratory model was operated with constant background gradient flow and a DNAPL spill was simulated using tetrachloroethene (PCE). The spill was dispersed to a trapped, immobile PCE saturation by a water flood. Areal PCE recovery was studied using a double-triangle well pattern to simulate a remediation scheme consisting of an alcohol pre-flood using aqueous isobutanol ( approximately 10% vol.) followed by a co-solvent flood using a solution of ethylene glycol (65%) and 1-propanol (35%). Experiments were conducted with the 2D model oriented in the horizontal plane and compared to experiments at the 15 degrees and 30 degrees dip-angle orientations. Injection was applied either in the downward or upward direction of flow. Experimental results were compared to theoretical predictions for flood front stability and used to evaluate effects of gravity on areal PCE recovery. Sensitivity experiments were performed to evaluate effects of the alcohol pre-flood on PCE areal recovery. For experiments conducted with the alcohol pre-flood and the 2D model oriented in the horizontal plane, results indicate that 89-93% of source zone PCE was recovered. With injection oriented downward, results indicate that areal PCE recovery was 70-77% for a 15 degrees dip angle and 57-59% for a 30 degrees dip angle. With injection oriented upward, results indicate that areal PCE recovery was 57-60% at the 30 degrees dip angle, which was similar to PCE recovery for injection in the downward flow direction. Lower areal PCE recovery at greater dip angles in either direction of flow was attributed to DNAPL swelling and migration, flood front instabilities and bypassing of the displaced fluid past the extraction wells during the alcohol pre-flood. Additional results demonstrate that the use of an alcohol pre-flood can be beneficial in improving DNAPL recovery in the horizontal orientation, but pre-flooding may reduce areal recovery efficiency in dip-angle orientations. This study also demonstrates the use of theoretical perturbation (fingering) analysis in predicting NAPL recovery efficiency for flooding processes in remediating aquifers with dip angles.     

Anthropogenic metal enrichment of snow and soil in north-eastern European Russia

Trace metal composition of winter snowpack, snow-melt filter residues and top-soil samples were determined along three transects through industrial towns in the Usa basin, North-East Russia: Inta, Usinsk and Vorkuta. Snow was analysed for Ag, Al, As, Ba, Cd, Co, Cr, Cu, Mn, Ni, Pb, Sr and Zn using ICP-MS (Ca and K by F-AAS for Vorkuta only), pH and acidity/alkalinity. Filter residues were analysed for: Al, Ba, Ca, Cd, Cu, K, Mg, Mn, Ni, Pb, Sr and Zn using F-AAS and GF-AAS; top-soil samples were analysed for Ba, Cu, Mg, Mn, Na, Ni, Pb, Sr, Zn using F-AAS. Results indicate elevated concentrations of elements associated with alkaline combustion ash around the coal mining towns of Vorkuta and Inta. There is little evidence of deposition around the gas and oil town of Usinsk. Atmospheric deposition in the vicinity of Vorkuta, and to a lesser extent Inta, added significantly to the soil contaminant loading as a result of ash fallout. Acid deposition was associated with pristine areas whereas alkaline combustion ash near to emission sources more than compensated for the acidity caused by SO2.     

Human exposure to dioxins through the diet in Catalonia,Spain: carcinogenic and non-carcinogenic risk

The main objectives of this study were to estimate the dietary intake of dioxins by the population of Catalonia, Spain, to determine which food groups showed the greatest contribution to this intake, and to assess the health risks potentially associated with the dietary dioxin intake. From June to August 2000, food samples were randomly acquired in seven cities of Catalonia. Dioxin concentrations were determined in 108 samples belonging to the following groups: vegetables, fruits, pulses, cereals, fish and shellfish, meats and meat products, eggs, milk and dairy products, and oils and fats. Estimates of average daily food consumption were obtained from recent studies. Total dietary intake of dioxins for the general population of Catalonia was estimated to be 95.4 pg WHO-TEQ/day (78.4 pg I-TEQ/day), with fish and shellfish (31%), diary products (25%), cereals (14%) and meat (13%) showing the greatest percentages of contribution to dioxin intake. The contribution of all the rest of food groups to the total dietary intake was under 20%. The non-carcinogenic risk index of dioxin intake through the diet was in the range 0.34-1.36, while the carcinogenic risk level was 1,360 excess cancer over a lifetime of 70 years. Our results corroborate the decreasing tendency in dietary intake of dioxins found in recent studies (2000-2001) from various countries.     

Effects of elevated soil copper on phenology,growth and reproduction of five ruderal plant species

The repeated use of copper (Cu) fungicides to control vine downy mildew, caused by Plasmopara viticola, has been responsible for the heavy increase of Cu concentration in the upper layers of vineyard soils. To determine the effects of elevated soil Cu on plant development, we created an artificial soil gradient with Cu enrichments ranging from 0 to 400 mg kg-1. On this gradient, and for five ruderal plant species commonly found in vineyards in southern France (Poa annua L., Dactylis glomerata L., Senecio vulgaris L., Hypochoeris radicata L., and Andryala integriflolia L.), we quantified survival, growth, and reproduction throughout one flowering season. High concentrations of Cu in the soil resulted in low survival, low total plant biomass, delay in flowering and fruiting, and low seed set. However, the effects differed among species. Furthermore, high soil Cu concentrations had contrasting effects on patterns of resource allocation depending on the plant species.     

Changes of copper speciation in maize rhizosphere soil

Chemical forms of copper in the rhizosphere and bulk soil of maize were investigated using rhizobox cultivation and sequential extraction techniques. The copper accumulations were also determined. The results demonstrated that there were continuous changes in copper fractionation within the maize rhizosphere. Initially, the amount of exchangeable copper increased before dropping below the initial level after 40 days or so. Carbonate associated copper followed a similar trend of change, but with a slower pace than the exchangeable copper. The increase in carbonate associated copper only become evident after 30 days, with the net loss occurring after 60 days. There were also initial increases in oxide bound copper as well as decreases in the organic matter associated copper, both followed by a turnover after 40-50 days. The accumulation of copper in the maize plant was found to be biomass dependent. The amount of accumulated copper absorbed in the plant material exceeded the initial quantity of the exchangeable copper in the soil, revealing a transformation from less bioavailable to more bioavailable fractions. During cultivation, decreases in redox potential and increases in pH, dissolved organic carbon (DOC), and microbial activity in the maize rhizosphere were observed. The change in copper speciation may result from root-induced changes in DOC, redox potential, and microbial activity in the rhizosphere.     

Trace metal behaviour in the Conwy estuary,North Wales

The distribution of trace metals Zn, Ni, Mn, Fe, Cu, Pb, Cd and Cr between suspended particulate matter (SPM) and water in the Conwy estuary, North Wales, has been studied in three surveys in 1998. Dissolved Cu and Mn showed some monthly variations. Most of the dissolved trace metals displayed a negative association with salinity, indicating rivers as a major source of inputs for them. Particulate Zn, Mn and Fe showed a decreasing concentration seaward, whilst the levels of Ni, Cu, Cr and Pb increased with salinity. SPM concentration was the most important variable significantly related to trace metal concentrations in SPM, with an inverse relationship between the two parameters. This was explained by the relative enrichment of trace metals in fine particles at low SPM concentrations and relative depletion of trace metals in coarse particles at high SPM concentrations. Particulate Zn, Mn and Pb were dominated by the fraction available to acetic acid (non-detrital), whilst particulate Ni, Fe and Cr were dominated by the fraction available to nitric acid (detrital). The partition coefficient of trace metals between SPM and water declined with increasing SPM concentration, consistent with the so-called "particle concentration effect". Such a phenomenon may be explained by the presence of fine particles (including colloids) enriched with trace metals at low SPM concentrations, and the salinity-induced desorption.     

Effect of pH control at the anode for the electrokinetic removal of phenanthrene from kaolin soil

Polycyclic aromatic hydrocarbon (PAH)-contaminated soils exist at numerous sites, and these sites may threaten public health and the environment because many PAH compounds are toxic, mutagenic, and/or carcinogenic. PAHs are also hydrophobic and persistent, so conventional remediation methods are often costly or inefficient, especially when the contaminants are present in low permeability and/or organic soils. An innovative technique, electrokinetically enhanced in situ flushing, has the potential to increase soil-solution-contaminant interaction and PAH removal efficiency for low permeability soils; however, the electrolysis reaction at the anode may adversely affect the remediation of low acid buffering capacity soils, such as kaolin. Therefore, the objective of this study was to improve the remediation of low acid buffering soils by controlling the pH at the anode to counteract the electrolysis reaction. Six bench-scale electrokinetic experiments were conducted, where each test employed one of three different flushing solutions, deionized water, a surfactant, or a cosolvent. For each of these solutions, tests were performed with and without a 0.01 M NaOH solution at the anode to control the pH. The test using deionized water with pH control generated a higher electroosmotic flow than the equivalent test performed without pH control, but the electroosmotic flow difference between the surfactant and cosolvent tests with and without pH control was minor compared to that observed with the deionized water tests. Controlling the pH was beneficial for increasing contaminant solubilization and migration from the soil region adjacent to the anode, but the high contaminant concentrations that resulted in the middle or cathode soil regions indicates that subsequent changes in the soil and/or solution chemistry caused contaminant deposition and low overall contaminant removal efficiency.     

Understanding the effectiveness of precursor reductions in lowering 8-hr ozone concentrations

Analyses of ambient measured ozone data were used in conjunction with the application of photochemical modeling to determine the technical feasibility of attaining the federal 8-hr ozone standard in central California. Various combinations of volatile organic compound (VOC) and oxides of nitrogen (NOx) emission reductions were effective in lowering modeled peak 1-hr ozone concentrations. However, VOC emissions reductions were found to have only a modest impact on modeled peak 8-hr ozone concentrations. NOx emission reductions generally lowered 8-hr ozone concentrations, but their effectiveness was partially or, in some cases, wholly offset by the increase in the number of NO cycles and, hence, in the ozone produced per NO. As a result, substantial NOx emission reductions--70 to 90%--were required to reduce peak 8-hr ozone concentrations to the level of the standard throughout the modeling domain. These modeling results provide a possible physical explanation for recent analyses that have reported more prominent trends in peak 1-hr ozone levels than in peak 8-hr ozone concentrations or in occurrences of mid-level (60-90 parts per billion by volume) ozone concentrations. The findings also have serious implications for the feasibility of attaining the 8-hr ozone standard in central California. Further efforts are needed to clarify the applicability of the modeling results to the full set of days with ozone levels exceeding the 8-hr ozone standard, as well as their applicability to other geographical areas.