Estimation of uncertainty arising from different soil sampling devices: the use of variogram parameters

In the frame of the international SOILSAMP project, funded and coordinated by the National Environmental Protection Agency of Italy (APAT), uncertainties due to field soil sampling were assessed. Three different sampling devices were applied in an agricultural area using the same sampling protocol. Cr, Sc and Zn mass fractions in the collected soil samples were measured by k(0)-instrumental neutron activation analysis (k(0)-INAA). For each element-device combination the experimental variograms were calculated using geostatistical tools. The variogram parameters were used to estimate the standard uncertainty arising from sampling. The sampling component represents the dominant contribution of the measurement uncertainty with a sampling uncertainty to measurement uncertainty ratio ranging between 0.6 and 0.9. The approach based on the use of variogram parameters leads to uncertainty values of the sampling component in agreement with those estimated by replicate sampling approach.     

Genotoxic evaluation of two mercury compounds in the Drosophila wing spot test

Few studies on the genotoxicity of mercury compounds have been carried out in Drosophila melanogaster, most of them focused in the effects on germinal cells, whereas studies in somatic cells are scarce. In the present study we have analyzed for the first time the genotoxic activity of mercury (II) chloride (MC) and methyl mercury (II) chloride (MMC) in the in vivo wing somatic mutation and recombination test in Drosophila, also known as the wing spot assay. This test is based on the principle that loss of heterozygosis and the corresponding expression of the suitable recessive markers, multiple wing hairs (mwh) and flare-3 (flr(3)), can lead to the formation of mutant clones in larval cells, which are then expressed as spots on the wings of adult flies. The mercury compounds were supplied to third instar larvae (72+/-2h old) at concentrations ranging from 1 to 50 microM for mercury chloride (MC) and from 0.5 to 5 microM for methyl mercury chloride (MMC). Both mercury compounds showed high toxicity; however, MMC was more toxic than MC. The results showed that none of the three categories of mutant spots recorded (small, large, and twin) increased significantly by the treatments, independently of the dose supplied, indicating that the mercury compounds tested exhibit a lack of genotoxic activity in the wing spot assay of D. melanogaster. These results contribute to increase the genotoxicity database on the in vivo evaluation of mercury compounds in Drosophila.     

Role of blue green algae biofertilizer in ameliorating the nitrogen demand and fly-ash stress to the growth and yield of rice (Oryza sativa L.) plants

Rice is a major food crop throughout the world; however, accumulation of toxic metals and metalloids in grains in contaminated environments is a matter of growing concern. Field experiments were conducted to analyze the growth performance, elemental composition (Fe, Si, Zn, Mn, Cu, Ni, Cd and As) and yield of the rice plants (Oryza sativa L. cv. Saryu-52) grown under different doses of fly-ash (FA; applied @ 10 and 100 tha(-1) denoted as FA(10) and FA(100), respectively) mixed with garden soil (GS) in combination with nitrogen fertilizer (NF; applied @ 90 and 120 kg ha(-1) denoted as NF(90) and NF(120), respectively) and blue green algae biofertilizer (BGA; applied @ 12.5 kg ha(-1) denoted as BGA(12.5)). Significant enhancement of growth was observed in the plants growing on amended soils as compared to GS and best response was obtained in amendment of FA(10)+NF(90)+BGA(12.5). Accumulation of Si, Fe, Zn and Mn was higher than Cu, Cd, Ni and As. Arsenic accumulation was detected only in FA(100) and its amendments. Inoculation of BGA(12.5) caused slight reduction in Cd, Ni and As content of plants as compared to NF(120) amendment. The high levels of stress inducible non-protein thiols (NP-SH) and cysteine in FA(100) were decreased by application of NF and BGA indicating stress amelioration. Study suggests integrated use of FA, BGA and NF for improved growth, yield and mineral composition of the rice plants besides reducing the high demand of nitrogen fertilizers.     

Analysis of perfluorooctanoate (PFOA) and other perfluorinated compounds (PFCs) in the River Po watershed in N-Italy

C7-C11 perfluorinated carboxylates (PFACs) and perfluorooctansulfonate (PFOS) were analysed in selected stretches of the River Po and its major tributaries. Analyses were performed by solid-phase extraction (SPE) with Oasis HLB cartridges and methanol elution followed by LC-MS-MS detection using 13C-labelled internal standards. High concentration levels ( approximately 1.3 microg l(-1)) of perfluorooctanoate (PFOA) were detected in the Tánaro River close to the city Alessandria. After this tributary, levels between 60 and 337 ng l(-1) were measured in the Po River on several occasions. The PFOA concentration close to the river mouth in Ferrara was between 60 and 174 ng l(-1). Using the river discharge flow data in m3 s(-1) at this point (average approximately 920 m3 s(-1) for the year 2006), a mass load of approximately 0.3 kg PFOA per hour or approximately 2.6 tons per year discharged in the Adriatic Sea has been calculated. PFOS concentration levels in the Po River at Ferrara were approximately 10 ng l(-1).     

Enhancement of the CO(2) retention capacity of X zeolites by Na- and Cs-treatments

Adsorption of carbon dioxide on alkaline modified X zeolites was investigated by temperature programmed desorption (TPD) analysis of these materials previously saturated with CO(2) at 50, 100 and 200 degrees C. Parent X zeolite (in its sodium form) was treated with different sodium and cesium aqueous solutions, using both carbonates and hydroxides as precursors. The resulting materials were characterised by nitrogen physisorption, XRD, and NH(3)-TPD, in order to determine their morphological, crystallographic and chemical properties. Slight desilication phenomena were observed using hydroxides as precursors, whereas the treatment with Cs salts lead to higher crystallinity losses. Several successive adsorption-desorption cycles were carried out in order to check the regenerability of the adsorbents. Cesium-treated zeolites present higher carbon dioxide retention capacities than the sodium treated and than the parent material. When working with these Cs-modified materials, the desorption takes place mainly at temperatures between 250 and 400 degrees C, results of great practical interest, since it allows the use these kinds of materials for adsorption-desorption cycles. The evolution of the retention capacity with temperature is also markedly more positive for Cs-treated zeolite, especially when carbonate is used as the precursor. These materials maintain high retention capacities at 100 degrees C (10mg g(-1)) and even at 200 degrees C (3mg g(-1)), temperatures at which the most of the adsorbents are inactive.     

Excess lead alters growth, metabolism and translocation of certain nutrients in radish

To elucidate the deleterious effects of excess lead on radish (Raphanus sativus) cv. Jaunpuri plants were grown in refined sand in complete nutrient solution for 30 days. On the 31st day lead nitrate was superimposed at 0.1 and 0.5mM to radish for 65 days. A set of plants in complete nutrient solution was maintained as control for the same period without lead. Excess Pb at 0.5mM showed growth depression with interveinal chlorosis on young leaves at apex. Excess Pb reduced the fresh and dry weight pronouncedly at d 65. Lead accumulation reduced the concentration of chlorophyll, iron, sulphur (in tops), Hill reaction activity and catalase activity whereas increased the concentration of phosphorus, sulphur (in roots) and activity of peroxidase, acid phosphatase and ribonuclease in leaves of radish.     

Concentrations and specific loads of brominated flame retardants in sewage sludge

Many substances related to human activities end up in wastewater and accumulate in sewage sludge. The present study focuses on two classes of brominated flame retardants: polybrominated diphenyl ethers (BDE28, BDE47, BDE49, BDE66, BDE85, BDE99, BDE100, BDE119, BDE138, BDE153, BDE154, BDE183, BDE209) and hexabromocyclododecane (HBCD) detected in sewage sludge collected from a monitoring network in Switzerland. Mean concentrations (n=16 wastewater treatment plants) were 310, 149, 95 and 17microg per kg dry matter for decaBDE, HBCD, penta- and octaBDE, respectively. These numbers correspond well with other studies from European countries. DecaBDE, HBCD, penta- and octaBDE showed average specific loads (load per connected inhabitant per year) in sludge of 6.1, 3.3, 2.0 and 0.3mgcap(-1)yr(-1), respectively. This is in line with consumption and storage of the compounds in the environment and the anthroposphere. Discrepancies observed for octaBDE and HBCD can be explained by the release from materials where these compounds are incorporated in and/or their degradation during anaerobic sludge treatment. Loads from different types of monitoring sites showed that brominated flame retardants ending up in sewage sludge originate mainly from surface runoff, industrial and domestic wastewater.     

Behaviour and biodegradation of sulfonamides (p-TSA, o-TSA, BSA) during drinking water treatment

Three sulfonamides -para-toluenesulfonamide (p-TSA), ortho-toluenesulfonamide (o-TSA) and benzenesulfonamide (BSA) - have recently been detected in groundwater within a catchment area of one drinking water treatment plant (DWTP), which is located downstream of a former sewage farm. The degradation pathways of p-TSA, o-TSA and BSA were investigated during drinking water treatment with incubation experiments and an experimental filter. Incubation experiments showed that p-TSA is removed during the treatment by microbiological processes. Removal of p-TSA is performed by adapted microorganisms only present in polluted groundwater. The elimination in an experimental filter of 1.6m length applying filtration velocities from 2 to 6 m h(-1) was approximately 93% of p-TSA. The microbial degradation rates in the incubation experiment were approximately 0.029 microg l(-1) h(-1) (zero order reaction). In the experimental filter, the reaction rate constants were around 0.0063 s(-1) for all filtration velocities (1st order reaction). Drinking water treatment does not reduce the concentration of o-TSA and BSA under conditions encountered in Berlin. p-TSA, o-TSA and BSA were only measured in the low microg l(-1) concentrations range in the purified water.     

The impact of sequestration on the bioaccessibility of arsenic in long-term contaminated soils

Arsenic (As) contamination of soil poses a potential threat to human health, particularly for small children, through the incidental ingestion of soil from hand-to-mouth activity. In this study, we examined the relationship between As bioaccessibility using the simplified bioaccessibility extraction test (SBET) and the soil fractions that contribute to bioaccessible As in 12 long-term contaminated soils. Sequential fractionation of soils prior to As bioaccessibility assessment found that As was primarily associated with the specifically sorbed (3-26%), amorphous and poorly crystalline (12-82%), and the well crystalline (3-25%) oxyhydroxide Fe/Al phases with proportions varying depending on the mode of As input. Arsenic bioaccessibility in these soils ranged from less than 1% in the gossan soil to 48% in railway corridor soils. Soil fractions contributing to As bioaccessibility were found to be from the non-specifically (<1-11%), the specifically (<1-29%) sorbed and the amorphous and poorly-crystalline (30-93%) oxyhydroxide Fe/Al fractions. Significant correlations (p<0.05) were found between the As bioaccessible fraction and the amorphous and poorly-crystalline oxyhydroxide Fe/Al fractions indicating that this fraction is a key factor influencing As bioaccessibility in many anthropogenically contaminated soils.     

Variability in microbial carbon isotope fractionation of tetra- and trichloroethene upon reductive dechlorination

The variability of stable carbon isotope fractionation upon reductive dechlorination of tetra- and trichloroethene by several microbial strains was investigated to examine the uncertainties related to the in situ application of compound specific isotope analysis (CSIA) of chlorinated ethenes. Carbon isotope fractionation was investigated with a set of microorganisms representative for the currently known diversity of dehalorespirers: Dehalococcoides ethenogenes strain 195, Desulfitobacterium sp. strain Viet1, Desulfuromonas michiganensis and Geobacter lovleyi sp. strain SZ and compared to the previous reports using Sulfurospirillum spp. and Desulfitobacterium sp. strain PCE-S. Carbon isotope fractionation of tetrachloroethene (PCE) and trichlorethene (TCE) was highly variable ranging from the absence of significant fractionation to carbon isotope fractionation (epsilonC) of 16.7 and 3.5-18.9 for PCE and TCE, respectively. Fractionation of both compounds by D. ethenogenes strain 195 (PCE: epsilonC=6.0; TCE: epsilonC=13.7) was similar to the literature data for mixed cultures containing Dehalococcoides spp. D. michiganensis (PCE: no significant fractionation; TCE: epsilonC=3.5) and G. lovleyi sp. strain SZ (PCE no significant fractionation; TCE: epsilonC=8.5) generated the lowest fractionation of all studied strains. Desulfitobacterium sp. strain Viet1 (PCE: epsilonC=16.7) gave the highest enrichment factor for PCE.