金属波纹填料在废油处理中应用的研究

文章主要对其结构特征进行剖析,并对波纹板在油液处理过程中的作用原理进行分析。通过两种油水分离材料进行真空脱水试验,真空脱水第一次循环中,金属波纹板的脱水率为79.12%,较传统折叠丝网脱水率高21%,证明金属波纹填料对废油真空脱水有良好的效果。最后通过两种不同规格的金属波纹板填料进行真空脱水试验,证明比表面积较大的350Y波纹板填料在废油脱水中并不优于比表面积较小的250Y金属波纹板填料。     

珠江口地区表层水中氯酚化合物污染研究

采用固相微萃取、气-质联用方法,测定分析了珠江口、横门水道及鱼塘表层水中氯酚(CPs)的污染特征。结果显示:USEPA优先控制的四种CPs类化合物在珠江口地区水体中检出率达到98.75%,不同水体氯酚污染程度由高到低的顺序为横门水道>珠江口>鱼塘。参照有关标准,珠江口地区CPs残留水平对环境及人类生活产生危害的风险可能性较低。多元回归分析表明,铁、锰总含量与总CPs和PCP含量存在显著负相关。     

羧甲基壳聚糖絮凝剂的研制及其应用研究

用氯乙酸对壳聚糖进行化学改性,制备了羧甲基壳聚糖(CMC),探讨了原料用量、反应温度及反应时间等因素对羧甲基取代度(羧化度DS)的影响,并用红外光谱(IR)对其结构进行了表征。海水的絮凝实验结果表明羧甲基壳聚糖能有效去除海水的浊度和化学需氧量(COD),最佳条件下浊度去除率可达到95%,COD去除率为55%左右。羧甲基壳聚糖在海水的絮凝处理中有良好的应用前景。     

静脉产业类生态工业园区的建设方法分析

静脉产业类生态工业园区运用先进的技术,将生产和消费过程中产生的废物资源化,是中国循环经济建设的重点领域之一。但是中国现有的静脉产业类生态工业园区尚处于创建阶段,没有形成规模化发展,因此可以在建设过程中借鉴日本、德国等发达国家的成功经验,探索适合中国国情的建设模式。本文通过分析静脉产业类生态工业因区在生产原料、生产过程和产品销售方面的主要影响因素以及其他国家采取的相应措施,为中国静脉产业类生态工业园区的建设提出建议。     

Drivers and barriers to engage enterprises in environmental management initiatives in Suzhou Industrial Park, China

Small- and medium-sized enterprises (SMEs) play an important role in sustainable development not only for their significant contribution to China’s economy, but also for their large share of total discharged pollutants. Therefore, this research takes the enterprises in Suzhou Industrial Park, China as the case study to investigate the environmental management practices of SMEs, and identify drivers and barriers to engaging businesses in environmental management initiatives. It is shown that, as in other countries, SMEs are less active in adopting environmental management initiatives than larger companies. Legislation remains the key driver to engage SMEs in environmental management initiatives. Based on the analysis, policy recommendations are also presented.     

Selective sorption of perfluorooctane sulfonate on molecularly imprinted polymer adsorbents

Perfluorooctane sulfonate (PFOS), as a potential persistent organic pollutant, has been widely detected in water environments, and has become a great concern in recent years. PFOS is very stable and difficult to decompose using conventional techniques. Sorption may be an attractive method to remove it from water. In this study, the molecularly imprinted polymer (MIP) adsorbents were prepared through the polymerization of 4-vinylpyridine under different preparation conditions in order to remove perfluorooctane sulfonate (PFOS) from water. The MIP adsorbents using perfluorooctanoic acid (PFOA) as the template had good imprinting effects and could selectively remove PFOS from aqueous solution. The sorption behaviors including sorption kinetics, isotherms, and effect of pH, salt, and competitive anions were investigated. Experimental results showed that the sorption of PFOS on the MIP adsorbents was very fast, pH-dependent, and highly selective. The achieved fast sorption equilibrium within 1 h was attributed to the surface sorption on the fine adsorbents. The sorption isotherms showed that the sorption selectivity of PFOS on the MIP adsorbents decreased at high PFOS concentrations, which may be due to the double-layer sorption and the formation of PFOS micelles on the sorbent surface. The sorption of PFOS on the MIP adsorbents was mainly dominated by the electrostatic interaction between the protonated vinylpyridine on the adsorbent surface and the anionic PFOS. The prepared MIP adsorbents can potentially be applied in water and wastewater treatment for selective removal of PFOS.     

基于Matlab的BP神经网络在大气污染物浓度预测中的应用

为了寻求有效控制和改善环境质量的相应措施,选用了英国伦敦Bloomsbury监测站的PM10小时平均浓度监测资料,采用“提前终止法”泛化改进的BP神经网络模型,预测PM1024 h内的小时平均浓度。结果表明：采用BP神经网络法对大气污染物浓度进行预测,预测相对误差在2%-48%之间,且绝大部分在2%-17%之间,预测精度较高,泛化能力较好,为大气污染物浓度预测提供了一种全新的思路和方法。     

新型城市污水脱氮除磷工艺的试验研究与优化设计

提出了一种改进型A2/O脱氮除磷工艺(MAAO),通过工艺试验和活性污泥2D模型对其进行运行和设计优化.结果表明,系统对COD、TN、NH 4-N和TP的平均去除率分别为85.7%、66.8%、97.35%和78.1%;当COD在300mg/L以上时,脱氮除磷效果均较好,可分别达到70%和90%以上.基于试验结果建立的MMAO工艺数学模型仿真效果良好,可对各单元组合进行优化,校核预测不利工况下的工艺运行效果,实现工艺不同工况下的运行参数优化,较好地实现新工艺的机理性优化设计和运行. MMAO稳定运行出水可达到<城镇污水处理厂污染物排放标准>(GB 18918-2002)一级B标准.由于工艺省去内回流,增加厌氧混合液部分超越提供反硝化碳源,使得运行费用明显降低;系统总停留时间比目前传统的以去除有机污染物为主的生物处理工艺略低,该工艺非常适用于对不具有脱氮除磷功能污水厂的改造.     

EDTA催化Fe3+/H2O2降解水中孔雀石绿

以孔雀石绿(malachite green, MG)为目标物,在pH=7的中性条件下,考察EDTA对Fe3 /H2O2降解水中孔雀石绿的影响,发现EDTA很大程度地促进了Fe3 /H2O2对孔雀石绿的降解. EDRA的加入可以使MG的脱色率由43%升至98.3%.在本实验条件下, EDTA的投加量增加5倍时, MG的脱色率上升40%.随着H2O2投量的增加, MG的脱色率显著上升.随着温度的升高, MG的脱色率显著上升.叔丁醇的加入抑制了EDTA对Fe3 /H2O2降解孔雀石绿的催化效果.总量相同H2O2的多次投加并未获得明显优于一次投加的去除效果. EDTA催化Fe3 /H2O2降解水中孔雀石绿并不遵循简单的羟基自由基机理,同时存在的中间价态铁的物种起着主要的氧化作用.随着反应的进行, EDTA被部分降解.     

珠三角区域空气质量指数(RAQI)的研究

区域空气质量指数(Regional Air Quality Index,RAQI)是粤港政府联合发布、反映珠三角区域内不同地区的空气质量状况的评级系统。虽然RAQI综合考虑了空气污染的总量水平,较我国空气污染指数(Air Pollution Index,API)系统增加了O3,一定程度地考虑了大气氧化性增高的问题,但其所表征的空气质量状况与实际空气污染水平和公众感受仍存在差异。对2006年珠三角和香港监测数据的研究表明,RAQI较API能更充分地体现空气质量的分级;小时RAQI能够实时准确地反映了环境质量的变化,较每日RAQI更具有实际意义;加入PM2.5或采用不同的O3、PM10和PM2.5环境质量标准,是影响RAQI的重要因素。PM2.5/PM10为0.7,比世界卫生组织推荐的PM2.5/PM10为0.5的比例更符合珠三角的实际情况。因此,增加细粒子污染物PM2.5,适当调严某些污染物的环境质量标准,增加RAQI的发布频次,可以使RAQI更全面、准确地反映区域空气污染状况,是RAQI改进的方向。