Ecological risk assessment of arsenic and metals in sediments of coastal areas of northern Bohai and Yellow Seas, China

Distributions of arsenic and metals in surface sediments collected from the coastal and estuarine areas of the northern Bohai and Yellow Seas, China, were investigated. An ecological risk assessment of arsenic and metals in the sediments was evaluated by three approaches: the Sediment Quality Guidelines (SQGs) of the United States Environmental Protection Agency (USEPA), the degree of contamination, and two sets of SQGs indices. Sediments from the estuaries of the Wuli and Yalu Rivers contained some of the greatest concentrations of arsenic, cadmium, copper, mercury, lead, and zinc. Median concentrations of cadmium and mean concentrations of lead and zinc were greater than background concentrations determined for the areas. All sediments were considered to be heavily polluted by arsenic, but moderately polluted by chromium, lead, and cadmium. Current concentrations of arsenic and metals are unlikely to be acutely toxic, but chronic exposures would be expected to cause adverse effects on benthic invertebrates at 31.4% of the sites.     

Emission Factors for High-Emitting Vehicles Based on On-Road Measurements of Individual Vehicle Exhaust with a Mobile Measurement Platform

ABSTRACT

Fuel-based emission factors for 143 light-duty gasoline vehicles (LDGVs) and 93 heavy-duty diesel trucks (HDDTs) were measured in Wilmington, CA using a zero-emission mobile measurement platform (MMP). The frequency distributions of emission factors of carbon monoxide (CO), nitrogen oxides (NO_x), and particle mass with aerodynamic diameter below 2.5 μm (PM_2.5) varied widely, whereas the average of the individual vehicle emission factors were comparable to those reported in previous tunnel and remote sensing studies as well as the predictions by Emission Factors (EMFAC) 2007 mobile source emission model for Los Angeles County. Variation in emissions due to different driving modes (idle, low- and high-speed acceleration, low- and high-speed cruise) was found to be relatively small in comparison to intervehicle variability and did not appear to interfere with the identification of high emitters, defined as the vehicles whose emissions were more than 5 times the fleet-average values. Using this definition, approximately 5% of the LDGVs and HDDTs measured were high emitters. Among the 143 LDGVs, the average emission factors of NO_x, black carbon (BC), PM_2.5, and ultrafine particle (UFP) would be reduced by 34%, 39%, 44%, and 31%, respectively, by removing the highest 5% of emitting vehicles, whereas CO emission factor would be reduced by 50%. The emission distributions of the 93 HDDTs measured were even more skewed: approximately half of the NO_x and CO fleet-average emission factors and more than 60% of PM_2.5, UFP, and BC fleet-average emission factors would be reduced by eliminating the highest-emitting 5% HDDTs. Furthermore, high emissions of BC, PM_2.5, and NO_x tended to cluster among the same vehicles.

IMPLICATIONS This study presents the characterization of on-road vehicle emissions in Wilmington, CA, by sampling individual vehicle plumes. Approximately 5% of the vehicles were high emitters, whose emissions were more than 5 times the fleet-average values. These high emitters were responsible for 30% and more than 50% of the average emission factors of LDGVs and HDDVs, respectively. It is likely that as the overall fleet becomes cleaner due to more stringent regulations, a small fraction of the fleet may contribute a growing and disproportionate share of the overall emissions. Therefore, long-term changes in on-road emissions need to be monitored.     

Biomineralization-based conversion of carbon dioxide to calcium carbonate using recombinant carbonic anhydrase

Recently, as a mimic of the natural biomineralization process, the use of carbonic anhydrase (CA), which is an enzyme catalyzing fast reversible hydration of carbon dioxide to bicarbonate, has been suggested for biological conversion of CO₂ to valuable chemicals. While purified bovine CA (BCA) has been used in previous studies, its practical utilization in CO₂ conversion has been limited due to the expense of BCA preparation. In the present work, we investigated conversion of CO₂ into calcium carbonate as a target carbonate mineral by using a more economical, recombinant CA. To our knowledge, this is the first report of the usage of recombinant CA for biological CO₂ conversion. Recombinant α-type CA originating in Neisseria gonorrhoeae (NCA) was highly expressed as a soluble form in Escherichia coli. We found that purified recombinant NCA which showed comparable CO₂ hydration activity to commercial BCA significantly promoted formation of solid CaCO₃ through the acceleration of CO₂ hydration rate, which is naturally slow. In addition, the rate of calcite crystal formation was also accelerated using recombinant NCA. Moreover, non-purified crude recombinant NCA also showed relatively significant ability. Therefore, recombinant CA could be an effective, economical biocatalyst in practical CO₂ conversion system.     

Evaluation of the antifungal effects of bio-oil prepared with lignocellulosic biomass using fast pyrolysis technology

This study was performed to investigate the utility of bio-oil, produced via a fast pyrolysis process, as an antifungal agent against wood-rot fungi. Bio-oil solutions (25-100 wt.%) were prepared by diluting the bio-oil with EtOH. Wood block samples (yellow poplar and pitch pine) were treated with diluted bio-oil solutions and then subjected to a leaching process under hot water (70 °C) for 72 h. After the wood block samples were thoroughly dried, they were subjected to a soil block test using Tyromyces palustris and Trametes versicolor. The antifungal effect of the 75% and 100% bio-oil solutions was the highest for both wood blocks. Scanning electron microscopy analysis indicated that some chemical components in the bio-oil solution could agglomerate together to form clusters in the inner part of the wood during the drying process, which could act as a wood preservative against fungal growth. According to GC/MS analysis, the components of the agglomerate were mainly phenolic compounds derived from lignin polymers.     

Geochemical and microbiological processes contributing to the transformation of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) in contaminated aquifer material

Hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) is a potential human carcinogen, and its contamination of subsurface environments is a significant threat to public health. This study investigated abiotic and biological degradation of RDX in contaminated aquifer material. Anoxic batch systems were started with and without pre-aeration of aquifer material to distinguish initial biological RDX reduction from abiotic RDX reduction. Aerating the sediment eliminated chemical reductants in the native aquifer sediment, primarily Fe(II) sorbed to mineral surfaces. RDX (50 μM) was completely reduced and transformed to ring cleavage products when excess concentrations (2 mM) of acetate or lactate were provided as the electron donor for aerated sediment. RDX was reduced concurrently with Fe(III) when acetate was provided, while RDX, Fe(III), and sulfate were reduced simultaneously with lactate amendment. Betaproteobacteria were the dominant microorganisms associated with RDX and Fe(III)/sulfate reduction. In particular, Rhodoferax spp. increased from 21% to 35% and from 28% to 60% after biostimulation by acetate and lactate, respectively. Rarefaction analyses demonstrated that microbial diversity decreased in electron-donor-amended systems with active RDX degradation. Although significant amounts of Fe(III) and/or sulfate were reduced after biostimulation, solid-phase reactive minerals such as magnetite or ferrous sulfides were not observed, suggesting that RDX reduction in the aquifer sediment is due to Fe(II) adsorbed to solid surfaces as a result of Fe(III)-reducing microbial activity. These results suggest that both biotic and abiotic processes play an important role in RDX reduction under in situ conditions.     

Using GA-Ridge regression to select hydro-geological parameters influencing groundwater pollution vulnerability

For groundwater conservation and management, it is important to accurately assess groundwater pollution vulnerability. This study proposed an integrated model using ridge regression and a genetic algorithm (GA) to effectively select the major hydro-geological parameters influencing groundwater pollution vulnerability in an aquifer. The GA-Ridge regression method determined that depth to water, net recharge, topography, and the impact of vadose zone media were the hydro-geological parameters that influenced trichloroethene pollution vulnerability in a Korean aquifer. When using these selected hydro-geological parameters, the accuracy was improved for various statistical nonlinear and artificial intelligence (AI) techniques, such as multinomial logistic regression, decision trees, artificial neural networks, and case-based reasoning. These results provide a proof of concept that the GA-Ridge regression is effective at determining influential hydro-geological parameters for the pollution vulnerability of an aquifer, and in turn, improves the AI performance in assessing groundwater pollution vulnerability.     

A long-term performance test on an autotrophic denitrification column for application as a permeable reactive barrier

The long-term performance of a sulfur-based reactive barrier system was evaluated using autotrophic denitrification in a large-scale column. A bacterial consortium, containing autotrophic denitrifiers attached on sulfur particles, serving as an electron donor, was able to transform 60mgNL(-1) of nitrate into dinitrogen. In the absence of phosphate, the consortium was unable to remove nitrate, but after the addition of phosphate, nitrate removal was readily evident. Once the column operation had stabilized, seepage velocities of 1.0x10(-3) and 0.5x10(-3)cms(-1), corresponding to hydraulic residence times of 24 and 48h, respectively, did not affect the nitrate removal efficiency, as determined by the nitrate concentration in the effluent. However, data on the nitrate, nitrite and sulfate distribution along the column indicated differential transformation patterns with column depths. Based on the dinitrogen concentration in the total gas collected, the denitrification efficiency of the tested column was estimated to be more than 95%. After 500d operation, the hydrodynamic characteristics of the column slightly changed, but these changes did not inhibit the nitrate removal efficiency. Data from a bacterial community analysis obtained from four parts of the column demonstrated the selective a spatial distribution of predominant species depending on available electron acceptors or donors.     

Effect of tris-(2-chloroethyl)-phosphate (TCEP) at environmental concentration on the levels of cell cycle regulatory protein expression in primary cultured rabbit renal proximal tubule cells

Tris-(2-chloroethyl)-phosphate (TCEP) is a typical organophosphate flame retardant and has been designated as a micropollutant in aquatic environment. However, the potential effect of TCEP at environmental concentration is mostly unknown. Thus, the purpose of this study was to investigate the renal effect of TCEP at environmental concentration using primary cultured rabbit renal proximal tubule cells (PTCs). The results showed that TCEP at 10 mg L(-1) decreased cell viability, 84.2% of the control, but increased lactate dehydrogenase, 150% fold of the control. TCEP at 10 mg L(-1) also inhibited expression of CDK4, cyclin D1, CDK2, and cyclin E (79.3%, 77.7%, 73.3%, and 67.8% of the control, respectively), but increased expression of p21(WAF/Cip1) and p27(Kip1) (167.7% and 141.3% of the control, respectively). TCEP decreased DNA synthesis and cell number, 77% and 70% of the control, respectively. Through study of cell viability, cell damage, cell cycle regulator expression, DNA synthesis and cell number, TCEP at 10 microg L(-1) only affected the cells that TCEP increased expression of p21(WAF/Cip1) and p27(Kip1), 118.6% and 121.5% of the control, respectively, but decreased DNA synthesis, 91.5% of the control. In conclusion, TCEP at 10 microg L(-1) significantly increased cell cycle regulatory protein expression (p21(WAF/Cip1) and p27(Kip1)), but slightly decreased DNA synthesis in primary cultured rabbit renal PTCs.     

The toxic effects of neem extract and azadirachtin on the brown planthopper, Nilaparvata lugens (Stål) (BPH) (Homoptera: Delphacidae)

Extracts of neem (Azadirachta indica A. Juss) are used in the developing world for many purposes including management of agricultural insect pests. The effects of different neem extracts (aqueous (NSKEaq), ethanol (NSKEeth) and hexane (NSKEhex)) on mortality, survival and weight of the brown planthopper, Nilaparvata lugens (St?l) (BPH) (Homoptera: Delphacidae) third and fourth nymphal instars were investigated. When fed rice plants treated with neem derivatives in bioassays, the survival of BPH nymphs is affected. Comparisons were made with the pure neem limonoid, azadirachtin (AZA) to ascertain its role as a compound responsible for these effects. AZA was most potent in all experiments and produced almost 100% nymphal mortality at 0.5 ppm and higher concentrations. When higher concentrations were applied, the effects appeared shortly after treatment and mortality was higher. Many insects died after remaining inactive for several days or during prolonged moulting. At lower concentrations, if moulting was achieved, disturbed growth and abnormalities were then likely to occur in the moulting process. Nymphs that were chronically exposed to neem extract showed a reduction in weight (45-60%). The results clearly indicate the simple NSKE (aqueous, ethanolic or both), containing low concentrations of AZA, can be used effectively to inhibit the growth and survival of BPH.