Effects of climatic factors on the prevalence of influenza virus infection in Cheonan,Korea

Environmental Science and Pollution Research - Big data can be used to correlate diseases and climatic factors. The prevalence of influenza (flu) virus, accounting for a large proportion of...     

Effect of reactive media composition and co-contaminants on sulfur-based autotrophic denitrification

As a part of a study developing a biological reactive barrier system to treat nitrate-contaminated groundwater, the effects of reactive media composition and co-contaminants on sulfur-oxidizing autotrophic denitrification were investigated. The size of sulfur granules affected the denitrification rates; kinetic constants of 2.883, 2.949, and 0.677 mg-N(1/2)/L(1/2)/day were obtained when the granule sizes were below 2 mm, between 2 and 5 mm, and over 5 mm, respectively. When the volume ratios of sulfur to limestone were 1:1, 2:1, 3:1, and 4:1, kinetic constants of 5.490, 3.903, 4.072, and 2.984 mg-N(1/2)/L(1/2)/day were obtained, respectively. The presence of TCE up to 20 mg/L didn't significantly affect nitrate removal efficiency. At the TCE concentration of 80 mg/L, however, nitrate removal was markedly inhibited. Also, Zn and Cu inhibited the denitrification activity at more than 0.5 mg/L of concentration whereas Cr (VI) did not significantly affect the nitrate removal efficiency at all levels tested.     

Ozone artifacts and carbonyl measurements using Tenax GR, Tenax TA, Carbopack B, and Carbopack X adsorbents

Four popular thermally desorbable adsorbents used for air sampling (Tenax TA, Tenax GR, Carbopack B, and Carbopack X) are examined for the potential to form artifacts with ozone (O3) at environmental concentrations. The performance of these adsorbents for the ketone and aldehyde species identified as O3-adsorbent artifacts was also characterized, including recovery, linearity, and method detection limits (MDLs). Using gas chromatography/mass spectrometry, 13 different artifacts were identified and confirmed for both Tenax TA and Tenax GR, 9 for Carbopack B, but none for Carbopack X. Several O3 artifacts not reported previously were identified, including: pentanal, 3-hexanone, 2-hexanone, hexanal, 3-heptanone, and heptanal with Tenax TA; pentanal, 3-hexanone, 2-hexanone, hexanal, and 3-heptanone on Tenax GR; and 1-octene and 1-nonene with Carbopack B. Levels of straight-chain aldehyde artifacts rapidly diminished after a few cycles of adsorbent conditioning/O3 exposure, and concentrations could be predicted using a first-order model. Phenyl-substituted carbonyl artifacts (benzaldehyde and acetophenone) persisted on Tenax TA and GR even after 10 O3 exposure-conditioning cycles. O3 breakthrough through the adsorbent bed was most rapid in adsorbents that yielded the highest levels of artifacts. Overall, artifact composition and concentration are shown to depend on O3 concentration and dose, conditioning method, and adsorbent type and age. Calibrations showed good linearity, and most compounds had reasonable recoveries, for example, 90 +/- 15% for Tenax TA, 97 +/- 23% for Tenax GR, 101 +/- 24% for Carbopack B, and 79 +/- 25% (91 +/- 9% for n-aldehydes) for Carbopack X. Benzeneacetaldehyde recovery was notably poorer (22-63% across the four adsorbents). MDLs for several compounds were relatively high, up to 5 ng. By accounting for both artifact formation and method performance, this work helps to identify which carbonyl compounds can be measured using thermally desorbable adsorbents and which may be prone to bias because of the formation of O3-adsorbent artifacts.     

Mid‐Range Streamflow Forecasts Based on Climate Modeling – Statistical Correction and Evaluation1

Abstract: Mid‐range streamflow predictions are extremely important for managing water resources. The ability to provide mid‐range (three to six months) streamflow forecasts enables considerable improvements in water resources system operations. The skill and economic value of such forecasts are of great interest. In this research, output from a general circulation model (GCM) is used to generate hydrologic input for mid‐range streamflow forecasts. Statistical procedures including: (1) transformation, (2) correction, (3) observation of ensemble average, (4) improvement of forecast, and (5) forecast skill test are conducted to minimize the error associated with different spatial resolution between the large‐scale GCM and the finer‐scale hydrologic model and to improve forecast skills. The accuracy of a streamflow forecast generated using a hydrologic model forced with GCM output for the basin was evaluated by forecast skill scores associated with the set of streamflow forecast values in a categorical forecast. Despite the generally low forecast skill score exhibited by the climate forecasting approach, precipitation forecast skill clearly improves when a conditional forecast is performed during the East Asia summer monsoon, June through August.     

A numerical simulation model of cyclic hardening behavior of AC4C-T6 for LNG cargo pump using finite element analysis

This paper is concerned with the evaluation of cyclic hardening models within the stress–strain behavior of aluminum alloy AC4C-T6 that can be used to LNG cargo pump operating in cryogenic temperature. To insure the strength assessment of LNG cargo pump, material model of cyclic hardening and plasticity for aluminum alloy AC4C-T6 is investigated through FEA (Finite Element Analysis) with various hardening options including linear and non-linear hardening, isotropic and kinematic hardening, and combined hardening model. Monotonic tensile and cyclic tensile experiments for AC4C-T6 alloy were performed at room temperature and temperature of ?165 °C. Parameters of each hardening model are obtained from the experimental data; thus five hardening models are numerically simulated thereafter. Appropriate hardening models which describe the cyclic stress–strain relationship are investigated through the simulations of cyclic hardening behavior by FEA. In order to verify the predicted behavior of cyclic hardening obtained by FEA, the results of FEA and those measured by experiments are compared.     

Ameliorants to immobilize Cd in rice paddy soils contaminated by abandoned metal mines in Korea

The cadmium (Cd) content of rice grain grown in metal-contaminated paddy soils near abandoned metal mines in South Korea was found to exceed safety guidelines (0.2 mg Cd kg?1) set by the Korea Food and Drug Administration (KFDA). However, current remediation technologies for heavy metal-contaminated soils have limited application with respect to rice paddy soils. Laboratory and greenhouse experiments were conducted to assess the effects of amending contaminated rice paddy soils with zerovalent iron (ZVI), lime, humus, compost, and combinations of these compounds to immobilize Cd and inhibit Cd translocation to rice grain. Sequential extraction analysis revealed that treatment with the ameliorants induced a 50-90% decrease in the bioavailable Cd fractions when compared to the untreated control soil. When compared to the control, Cd uptake by rice was decreased in response to treatment with ZVI + humus (69%), lime (65%), ZVI + compost (61%), compost (46%), ZVI (42%), and humus (14%). In addition, ameliorants did not influence rice yield when compared to that of the control. Overall, the results of this study indicated that remediation technologies using ameliorants effectively reduce Cd bioavailability and uptake in contaminated rice paddy soils.     

Integrative trophic network assessments of a lentic ecosystem by key ecological approaches of water chemistry, trophic guilds, and ecosystem health assessments along with an ECOPATH model

The objective of this study was to describe the trophic structure and energy flow in a lentic ecosystem in South Korea. Physicochemical water conditions were evaluated along with the reservoir ecosystem health using a multimetric IBI model. Nutrient analyses of the reservoir showed a nutrient rich and hypereutrophic system. Guild analysis revealed that tolerant and omnivorous species dominated the ecosystem. Tolerant fish, as a proportion of the number of individuals, were associated (R² > 0.90, p < 0.01) with TN and TP, the key indicators of trophic state in lentic ecosystems. The mean Reservoir Ecosystem Health Assessment (REHA) score was 19.3 during the study, which was judged as in ‘fair to poor’ condition. A trophic analysis of the reservoir estimated by the ECOPATH model shows that most activity in terms of energy flow occurred in the lower part of the trophic web, where there was intensive use of primary producers as a food source. Consequently, of the 10 consumer groups, nine fell within trophic levels <2.8. Trophic levels (TL) estimated from the weighted average of prey trophic levels varied from 1.0 for phytoplankton, macrophytes, and detritus to 3.25 for the top predator, Pseudobagrus fulvidraco. Our integrated approach to trophic network analysis may provide a key tool for determining the effects of nutrient influx on energy flow pathways in lentic ecosystems.