Site investigation on medical waste management practices in northern Jordan

This study investigated the medical waste management practices used by hospitals in northern Jordan. A comprehensive inspection survey was conducted for all 21 hospitals located in the study area. Field visits were conducted to provide information on the different medical waste management aspects. The results reported here focus on the level of medical waste segregation, treatment and disposal options practiced in the study area hospitals. The total number of beds in the hospitals was 2296, and the anticipated quantity of medical waste generated by these hospitals was about 1400 kg/day. The most frequently used treatment practice for solid medical waste was incineration. Of these hospitals, only 48% had incinerators, and none of these incinerators met the Ministry of Health (MoH) regulations. As for the liquid medical waste, the survey results indicated that 57% of surveyed hospitals were discharging it into the municipal sewer system, while the remaining hospitals were collecting their liquid waste in septic tanks. The results indicated that the medical waste generation rate ranges from approximately 0.5 to 2.2 kg/bed day, which is comprised of 90% of infectious waste and 10% sharps. The results also showed that segregation of various medical waste types in the hospitals has not been conducted properly. The study revealed the need for training and capacity building programs of all employees involved in the medical waste management.     

Newly developed Fe3O4–Cr2O3 magnetic nanocomposite for photocatalytic decomposition of 4-chlorophenol in water

Chlorophenols, typically 4-chlorophenols are highly toxic and non-biodegradable organic contaminants which pose serious threat to the environment, particularly when released into aqueous medium. The removal of these pollutants by efficient method has received worldwide concern in recent past. A new Fe_3O_4–Cr_2O_3 magnetic nanocomposite was synthesized by wet chemical method under ultrasonic irradiation. Microstructure and morphology of the nanocomposite were characterized by powder X-ray diffraction(XRD),Fourier transform infrared(FT-IR), and a transmission electron microscope(TEM). Magnetic and optical properties were studied by a vibrating sample magnetometer(VSM) and an ultraviolet–visible(UV–Vis) spectrophotometer respectively. The magnetic nanocomposite(MNC) was used as photocatalyst for effective decomposition of 4-chlorophenol in water under ultraviolet(UV) irradiation.     

Environmental assessment,microstructural behaviour,stress–strain characteristics,and effect of exposure to extreme temperature on sustainable concrete made with dolomite mining residues

Environmental Science and Pollution Research - Mining and extraction of stones and minerals play a significant role in many countries economic growth in the world. The production of dolomite...     

Sources of hydrocarbons in sediments of the Mandovi estuary and the Marmugoa harbour, west coast of India

Surface sediments were collected from various locations of the Mandovi estuary and the Marmugoa harbour. Sediments were analysed for organic carbon (OC), total lipids, n-alkanes concentration and composition. Concentrations of OC, total lipids and n-alkanes varied spatially and ranged from 1 to 2.5%, 176 to 1413 microg/g dry weight (dw) sediments, and 0.8 to 3.2 microg/g dw sediments of the Mandovi estuary, respectively; and from 0.6 to 2.9%, 233 to 1448 microg/g dw sediments, and 1.6 to 10.7 microg/g dw sediments in the Marmugoa harbour, respectively. Long chain, odd carbon n-alkanes (C(23)-C(33)) in the Mandovi estuary, whereas short chain, even carbon n-alkanes (C(11)-C(21)) in the Marmugoa harbour sediments were more abundant. The total HC concentrations, n-alkane composition, CPI, UCM and other evaluation indices suggest the dominance of terrestrial hydrocarbons in the estuarine while petroleum derived hydrocarbons in the harbour sediments. This conclusion was further supported by the abundance of hopanes with C(29) to C(34) alpha, beta compounds and steranes with C(27), C(28) and C(29) compounds in the harbour sediments.     

Rheological and Thermal Properties of the PLA Modified by Electron Beam Irradiation in the Presence of Functional Monomer

Polylactic acid (PLA) has been modified by electron beam radiation in the presence of glycidyl methacrylate (GMA) to enhance the melt strength of PLA. The modified PLA was prepared by varying both the amount of GMA and the irradiation dose and was characterized by observing the thermal properties, the melt viscoelastic properties and the gel fraction. For comparison, virgin PLA was also irradiated. All irradiated virgin PLA had a lower complex viscosity and a storage modulus compared to virgin PLA due to irradiation-induced chain scission. However, these properties were remarkably improved due to formation of long chain branching and retarding chain scission if GMA was introduced in this system. The increase in melt viscoelastic property was much dependent on the irradiation dose. At optimum doses of radiation, it showed maximum complex viscosity and storage modulus. The PLA irradiated with 20 kGy in the presence of 3 phr GMA showed a complex viscosity of about 10 times higher and a storage modulus of 100 times higher than those of virgin PLA at 0.1 rad/s. Gel fraction measurement revealed that chain scission and branching was more dominant than crosslinking. The biodegradability of irradiated PLA was slightly decreased by the presence of GMA.     

Quantitation of persistent organic pollutants adsorbed on plastic debris from the Northern Pacific Gyre's "eastern garbage patch"

Floating marine plastic debris was found to function as solid-phase extraction media, adsorbing and concentrating pollutants out of the water column. Plastic debris was collected in the North Pacific Gyre, extracted, and analyzed for 36 individual PCB congeners, 17 organochlorine pesticides, and 16 EPA priority PAHs. Over 50% contained PCBs, 40% contained pesticides, and nearly 80% contained PAHs. The PAHs included 2, 3 and 4 ring congeners. The PCBs were primarily CB-11, 28, 44, 52, 66, and 101. The pesticides detected were primarily p,p-DDTs and its metabolite, o,p-DDD, as well as BHC (a,b,g and d). The concentrations of pollutants found ranged from a few ppb to thousands of ppb. The types of PCBs and PAHs found were similar to those found in marine sediments. However, these plastic particles were mostly polyethylene which is resistant to degradation and although functioning similarly to sediments in accumulating pollutants, these had remained on or near the ocean surface. Particles collected included intact plastic items as well as many pieces less than 5 mm in size.     

Comparison of a plant based natural surfactant with SDS for washing of As(Ⅴ) from Fe rich soil

This study explores the possible application of a biodegradable plant based surfactant, obtained from Sapindus mukorossi, for washing low levels of arsenic （As） from an iron （Fe） rich soil. Natural association of As（Ⅴ） with Fe（Ⅲ） makes the process difficult. Soapnut solution was compared to anionic surfactant sodium dodecyl sulfate （SDS） in down-flow and a newly introduced suction mode for soil column washing. It was observed that soapnut attained up to 86% efficiency with respect to SDS in removing As. Full factorial design of experiment revealed a very good fit of data. The suction mode generated up to 83 kPa pressure inside column whilst down-flow mode generated a much higher pressure of 214 kPa, thus making the suction mode more efficient. Micellar solubilisation was found to be responsible for As desorption from the soil and it followed 1st order kinetics. Desorption rate coefficient of suction mode was found to be in the range of 0.005 to 0.01, much higher than down-flow mode values. Analysis of the PT-IR data suggested that the soapnut solution did not interact chemically with As, offering an option for reusing the surfactant. Soapnut can be considered as a soil washing agent for removing As even from soil with high Fe content.     

Induction of cytochrome P-450 and phosphatidylcholine synthesis by endosulfan in liver of rats: effect of quality of dietary proteins

Administration of endosulfan significantly increased microsomal protein, cytochrome P-450 content and the activity of aminopyrine N-demethylase. Effect of endosulfan and actinomycin D either alone or together on microsomal protein, cytochrome P-450, NADPH cytochrome c reductase, aniline hydroxylase, aminopyrine N-demethylase, phosphatidylcholine content, incorporation of 3H-choline and 14C-methionine were studied in rats given amino acid deficient and supplemented diets. Administration of endosulfan significantly increased the above parameters in both the dietary groups, whereas administration of actinomycin D did not have any effect in rats fed supplemented diets, however, significant decrease in the PC and the incorporation of choline and methionine into PC of rats fed deficient diet were observed. A positive correlation in the effect of endosulfan on hepatic mixed function oxidase activity and hepatic phosphatidylcholine is observed.