Changes in lipid profiles of liver microsomes of rats following intratracheal administration of DDT or endosulfan

Abstract

The effect of intratracheal administration of DDT (5 mg/100 g body weight) or endosulfan (1 mg/100 g body weight) to rats for three consecutive days, has been studied on liver lipid metabolism. The administration of DDT but not endosulfan significantly increased the liver weight and the microsomal protein contents. Both DDT and endosulfan treatments significantly increased the contents of microsomal phosphatidylcholine (PC), total‐free‐ and esterified cholesterol. The distribution of unsaturated fatty acids of microsomal PC and PE was increased by DDT treatment. The intratracheal administration of DDT caused fatty infiltration of liver which was probably due to increased synthesis of triglycerides (TG). This is supported by the increased incorporation of radioactive palmitate‐l‐¹⁴C into microsomal TG. However, the increased incorporation of palmitate‐l‐¹⁴C into microsomal PC and phosphatidylethanolamine (PE) after the DDT treatment, was due to the increased transacylation reaction supported by the decreased activity of microsomal phospholipase A. The intratracheal adminstration of endosulfan did not has pronounced effect on liver fatty infiltration, or transacylation reaction in microsomal PC and PE. However, the results have shown that the treatments of DDT or endosulfan increased the PC contents and the incorporation of radioactive [methyl‐³H]choline into PC of microsomes, resulting the increased synthesis of PC via CDPcholine pathway. Thus, the intratracheally administered DDT or endosulfan to rats showed that both the insecticides cause manifestations in the biochemistry of microsomal membrane lipids, although the effects of DDT being more pronounced. Therefore, the translocation effects of these insecticides or metabolites from lung to liver is established.     

Quantifying monthly water balance to estimate water deficit in Mayurakshi River basin of Eastern India

Environment, Development and Sustainability - Recorded seasonal variation and uneven distribution of rainfall is one of the major issues to the agrarian society and the domestic water users today....     

Concentration of nitrite in respirable particulate matter of ambient air in Vadodara, Gujarat, India

Water extract of respirable particulate matter (RPM) was analyzed by Ion chromatography technique to investigate the presence of nitrite (NO2) as secondary aerosol in ambient environment. The nitrite particulates undergo photo hydroxyl radical reaction in environment produce nitrous acid, which reacts with metal and absorbs on RPM as water-soluble metal salt. The mean concentration of nitrite was 20.86 microg m(-3) in ambient environment. Regression analysis showed that the relationship for respirable particulate matter and nitrite (RPM-NO2, R2 = 0.742) was positively significant. We are reporting the presence of nitrite as an aerosol in ambient environment.     

Arsenic in freshwater ecosystems of the Bengal delta: status,sources and seasonal variability

The study aimed to examine the contamination status of arsenic (As) in excavated small water bodies, commonly known as ponds – the integral part of daily life in the arsenic-affected rural areas of West Bengal, India in comparison to the unaffected areas. The ponds of the contaminated area had higher levels of As: water 2–174 µg L^?1 (mean 31 ± 2 µg L^?1) and sediment 1.3–37.3 mg kg^?1 (mean 10.3 ± 0.4 mg kg^?1), than those from the unaffected area: water 1–8 µg L^?1 (mean 4 ± 0 µg L^?1) and sediment 1.4–5.3 mg kg^?1 (mean 3.0 ± 0.1 mg kg^?1). A moderate positive correlation was observed between the water and sediment arsenic content of the ponds of the arsenic-affected region (r = 0.688, n = 277, p < 0.0001). Contaminated ground water, either as direct input or through agricultural washings, was found to be the major contributor of arsenic pollution to these ecosystems. Seasonal variations were not prominent. This study emphasized the beneficial role of using the studied ecosystems over the highly contaminated ground water for various livelihood activities in the Gangetic delta region.     

Rear impact responses of different sized adult Hybrid III dummies

Rear impact sled tests were conducted using 5th, 50th, and 95th percentile Hybrid III dummies to evaluate proposed injury criteria. Different head restraint height (750, 800 mm) and backset (0, 50, 100 mm) positions were used to determine axial and shear forces, bending moments, and injury criteria (NIC, N(ij), and N(km)). The time sequence to attain each parameter was also determined. Three events were identified in the response. Event I was coincident with the maximum rearward motion of the torso, Event II occurred at the time of the peak upper neck flexion moment, and Event III occurred at the time of maximum rearward motion of the head. Parameters such as backset, head restraint height, seat-head restraint interaction, and anthropometry affected impact responses. Head rotations increased with increasing backset and increasing head restraint height. However, N(ij) and N(km) did not exhibit such clear trends. The 50th percentile dummy responded with consistent injury criteria values (e.g., the magnitude of the injury criteria increased with backset increase or head restraint height decrease). However, the 5th and 95th percentile dummies did not demonstrate such trends. These findings underscore the need to include subject anthropometry in addition to seat and head restraint characteristics for better assessment of rear impact responses.     

A Review of the Fate and Effects of Silicones in the Environment

Silicones are well-known useful materials varying in structure, reactivity, and chemical and physical properties, but they all contain a covalent bond between the silicon atom and an organic group. Most common of these polymers are those based on polydimethylsiloxane (PDMS) having a siloxane (Si–O–Si) repeat unit and two methyl groups on each silicon atom. All these polymers are manmade, and the organosilicon linkage is not found in nature. It was therefore erroneously assumed that these polymers do not degrade naturally in the environment. It is the purpose of this review to refute this myth and to describe the degradation processes of PDMS in the environment and any potential ecological impact on the terrestrial, aquatic, and atmospheric compartments. Although it was found that minor degradation takes place by hydrolysis of PDMS to dimethylsilandiol followed by oxidation of the methyl group to aldehyde and ultimately to CO₂ by Arthobacter and Fusarium oxysporium schlechtendahl, the major degradation processes are abiotic. High molecular weight PDMS are initially depolymerized by soil hydrolysis of the siloxane bonds to yield organosilanol terminated oligomers. These organosilanols and low molecular weight linear PDMS and cyclics are evaporated into the atmosphere and are oxidized there by hydroxyl radicals to benign silica, water, and CO₂.     

A comparative study of biopolymers and alum in the separation and recovery of pulp fibres from paper mill effluent by flocculation

Recovery of cellulose fibres from paper mill effluent has been studied using common polysacchatides or biopolymers such as Guar gum, Xanthan gum and Locust bean gum as flocculent. Guar gum is commonly used in sizing paper and routinely used in paper making. The results have been compared with the performance of alum, which is a common coagulant and a key ingredient of the paper industry. Guar gum recovered about 3.86 mg/L of fibre and was most effective among the biopolyrners. Settling velocity distribution curves demonstrated that Guar gum was able to settle the fibres faster than the other biopolymers; however, alum displayed the highest particle removal rate than all the biopolymers at any of the settling velocities. Alum, Guar gum, Xanthan gum and Locust bean gum removed 97.46%, 94.68%, 92.39% and 92.46% turbidity of raw effluent at a settling velocity of 0.5 cm/min, respectively. The conditions for obtaining the lowest sludge volume index such as pH, dose and mixing speed were optimised for guar gum which was the most effective among the biopolymers. Response surface methodology was used to design all experiments, and an optimum operational setting was proposed. The test results indicate similar performance of alum and Guar gum in terms of fioc settling velocities and sludge volume index. Since Guar gum is a plant derived natural substance, it is environmentally benign and offers a green treatment option to the paper mills for pulp recycling.     

Beryllium Concentrations in Ambient Air and Its Source Identification

Beryllium concentrations in atmospheric particulate and soil samples in and around a Beryllium Processing Facility (BPF) have been measured. The mean air concentration level of beryllium in and around the fence line of the BPF is 0.48 ± 0.43 ng m^-3 (n = 397) and is mostly influenced by diurnaland seasonal changes. The observed air concentration levelswere well below the prescribed ambient air quality (AAQ)standard of 10 ng m^-3. The soil concentration levels ofberyllium in the study area were found to be in the range of 1.42–2.75 g g^-1. The mass median aerodynamic diameter (MMAD)of beryllium aerosols in ambient air was found to be 6.9 m.Source identification using the Enrichment Factor (EF) approachindicates soil as the predominant contributory source for air concentrations at the site.