DCMU-enhanced fluorescence as an index of photosynthetic activity in phytoplankton

Tests have been carried out, both on phytoplankton cultures and in the field, on the relation between the ratio of 3-(3,4-dichlorophenyl)-1,1-dimethyl urea (DCMU)-enhanced to normal fluorescence (F _D /F _N ) and the specific photosynthetic rate (P/B). In all cases observed, significant linear correlations were found between these two values. Differences in this relation were observed according to species and physiological conditions. Nutrient stress that occurs in batch cultures decreases both F _D /F _N and P/B, while lowered light intensity has a different effect on both, increasing F _D /F _N and decreasing P/B. This is interpreted as indicating that F _D /F _N is an index of photosynthetic efficiency at different light levels and an indicator of the specific photosynthetic rate (P/B) when physiological conditions vary at a given light intensity. The practical use of DCMU-enhanced fluorometry to estimate instantaneous P/B values in the field is discussed, stressing the frequent calibrations needed, as in all in situ fluorometry studies.     

Studies on phytotoxic effect of aluminium on growth and some morphological parameters of Vigna radiata L. Wilczek

Aluminium toxicity is a major deterrent for plant growth in acid soils below pH 5.0. This study deals with effect of aluminium toxicity on growth of mungbean (Vigna radiata L. Wilczek) seedlings. Seed germination (in %) declined with increased content of Al2(SO4)3, while promotive effect was observed at very low dosage. Different concentrations of aluminum sulphate salt were applied to mungbean seeds. Measurement of aluminium content in mungbean leaves was done through atomic absorption spectrophotometer. Root length (root and hypocotyl length) and shoot length (shoot and epicotyl length) was measured at seven days old seedling stage. Different concentrations of Al2(SO4)3 were found to have significant effect both on shoot and root length. Leaf area, fresh and dry weight was significantly reduced. Increased stomatal frequency and trichome density with an increase in concentrations of Al2(S04)3 was observed through scanning electron microscope.     

Laboratory evidence of natural remobilization of multicomponent DNAPL pools due to dissolution

Mixtures of dense non-aqueous phase liquids (DNAPLs) trapped in the subsurface can act as long-term sources of contamination by dissolving into flowing groundwater. In general, the components of higher solubility are removed more quickly, thus altering the composition of the remaining DNAPL, and possibly leading to changes in its physical properties. Through the development of a simple compositional model, Roy et al. [J. Contam. Hydrol. 2002 (59) 163] showed that preferential dissolution of a mixed DNAPL could potentially result in changes in density and interfacial tension that could subsequently lead to remobilization of an initially static DNAPL pool. The laboratory experiments presented in this next paper provide a proof-of-concept for the previously presented theory, demonstrating and quantifying this process of remobilization. In addition, the experiments provide a data set for evaluation of the model presented by Roy et al. [J. Contam. Hydrol. 2002 (59) 163]. In the four experiments, a DNAPL pool comprised of tetrachloroethene and benzene was created as an open pool overlying glass beads within a water-saturated 2-D flow box. Experiments included rectangular and triangular pools. In each of the experiments, remobilization (as breakthrough) was observed more than 2 weeks after formation of the initial pool. During each experiment, the pool height declined as mass was lost by dissolution, while sampling indicated a decrease in the mole fraction of benzene, the more soluble component. Small protuberances formed along the bottom of the pool as its composition changed with time and the displacement pressure was achieved for various pore throats. Eventually one of the protuberances extended further, forming a finger (breakthrough). In general, the pool emptied as the finger proceeded further into the beads. It was also shown theoretically and experimentally that remobilization will occur sooner for pools with a triangular (pointing down), rather than rectangular, shape. The experimental results were simulated using the model developed by Roy et al. [J. Contam. Hydrol. 2002 (59) 163]. The model matched the observations well, suggesting that it accurately represents the primary mechanisms involved with natural remobilization under the conditions of the study.     

Climate change mitigation policy paradigms—national objectives and alignments

The aim of this paper is to assess how policy goals in relation to the promotion of green growth, energy security, pollution control and greenhouse gas (GHG) emissions reductions have been aligned in policies that have been implemented in selected countries during the last decades as a basis for discussing how a multi objective policy paradigm can contribute to future climate change mitigation. The paper includes country case studies from Brazil, Canada, China, the European Union (EU), India, Japan, Mexico, Nigeria, South Africa, South Korea and the United States covering renewable energy options, industry, transportation, the residential sector and cross-sectoral policies. These countries and regions together contribute more than two thirds of global GHG emissions. The paper finds that policies that are nationally driven and that have multiple objectives, including climate-change mitigation, have been widely applied for decades in both developing countries and industrialised countries. Many of these policies have a long history, and adjustments have taken place based on experience and cost effectiveness concerns. Various energy and climate-change policy goals have worked together in these countries, and in practice a mix of policies reflecting specific priorities and contexts have been pursued. In this way, climate-change mitigation has been aligned with other policy objectives and integrated into broader policy packages, though in many cases specific attention has not been given to the achievement of large GHG emission reductions. Based on these experiences with policy implementation, the paper highlights a number of key coordination and design issues that are pertinent to the successful joint implementation of several energy and climate-change policy goals.     

Use of Biotic Community Structure as a Measure of Ecological Degradation

The benthic macroinvertebrate communities of two lotic aquatic habitats,namely,the Churni River(C-R)and the Jalangi River(J-R)were compared in this study.One lotic aquatic system(C-R)was polluted by organic pollutants due to discharge of unprocessed sewage water,while the other(J-R)was not affected by such pollution.Evaluations of various physico-chemical properties of water,sediment and different macroinvertebrate communities of the two tropical lotic systems were done in a period from January,2002 to December,2003.A long term temporal change in the macroinvertebrate communities was recorded due to increase in sediment rH value.Sediment redox potential affected by the anthropogenic activities was found to be an important factor for alteration of macroinvertebrate communities in these aquatic ecosystems.A positive correlation has been established between rH and Margalef index in this study.Potassium and the total count of coliform bacteria in water showed significantly higher values for the polluted Churni River than those for the Jalangi River.Fig 3,Tab 4,Ref 34     

Non-intrusive characterization methods for wastewater-affected groundwater plumes discharging to an alpine lake

Streams and lakes in rocky environments are especially susceptible to nutrient loading from wastewater-affected groundwater plumes. However, the use of invasive techniques such as drilling wells, installing piezometers or seepage meters, to detect and characterize these plumes can be prohibitive. In this work, we report on the use of four non-intrusive methods for this purpose at a site in the Rocky Mountains. The methods included non-invasive geophysical surveys of subsurface electrical conductivity (EC), in-situ EC measurement of discharging groundwater at the lake-sediment interface, shoreline water sampling and nutrient analysis, and shoreline periphyton sampling and analysis of biomass and taxa relative abundance. The geophysical surveys were able to detect and delineate two high-EC plumes, with capacitively coupled ERI (OhmMapper) providing detailed two-dimensional images. In situ measurements at the suspected discharge locations confirmed the presence of high-EC water in the two plumes and corroborated their spatial extent. The nutrient and periphyton results showed that only one of the two high-EC plumes posed a current eutrophication threat, with elevated nitrogen and phosphorus levels, high localized periphyton biomass and major shifts in taxonomic composition to taxa that are commonly associated with anthropogenic nutrient loading. This study highlights the need to use non-intrusive methods in combination, with geophysical and water EC-based methods used for initial detection of wastewater-affected groundwater plumes, and nutrient or periphyton sampling used to characterize their ecological effects.     

A Note on the Use of Conservation Practices in U.S. Agriculture

This article measures the effect of an increase in productivityattributable to an increase in soil organic carbon associated with theincrease in the use of conservation practices in agriculture in theUnited States. Both the direct and indirect effects are calibrated. Theanalytical approach used consists of a dynamic computable generalequilibrium model composed of 14 producing sectors, 10 consumingsectors, seven household categories classified by income, and agovernment. The results suggest that the impact of a change inproductivity is an increase in output over a six year period starting in1998 in field crops. The most significant impact is felt in thelivestock sector. This is because field crops are a major input in theproduction of livestock. The food processing sector also exhibits arelatively large increase because of the increase in inputs of both fieldcrops and livestock. Manufacturing output increases primarily becauseoverall investment rises and most investment utilizes manufacturinggoods. The other producing sectors are generally unaffected by theincrease in agricultural production due to an increase in soil organiccarbon. Coincident with the increase in the production of field cropsis a relatively large decrease in the price of field crops. Othernoticeable price reductions occur in the livestock sector and the foodprocessing sector. For the consuming sectors, the consumption offood and alcohol and tobacco increase but consumption in all of theother sectors remains basically unchanged. Prices in the food andalcohol and tobacco sectors decline by about 1% while theprices in the other sectors remain static. Household welfare increasesin the aggregate by only 0.1% with this increase occurringuniformly across all household categories. Revenue received by thegovernment increases a modest 2% in response to an increase inoutput and, hence, an increase in taxes paid. The results indicate thatthere are significant production benefits for several sectors that can berealized by an increase in the use of conservation practices inagricultural production which, in turn, enhances soil organic carbon.There are a number of policy options available to promote the use ofconservation practices. These include education and technicalassistance, financial assistance, research and development, landretirement, and regulation and taxes.     

The collection of PM10 for toxicological investigation: comparisons between different collecting devices

A positive correlation has been established between increased levels of airborne particulate pollution and adverse health effects, the toxicological mechanisms of which are poorly understood. For toxicologists to unambiguously determine thesemechanisms, truly representative samples of ambient PM₁₀ are required. This presents problems, as PM₁₀ collecting equipment commonly employed, such as the Tapered Element Oscillating Microbalance (TEOM®), heat the inflow toexclude moisture or use fibrous filters, resulting in a PM₁₀sample that may have undergone significant chemical change on thefilter surface or is contaminated by filter fibres. Other systems(i.e. Negretti and Partisol) can successfully collect PM₁₀ without chemical alteration or filter contamination. Comparativecollections from Port Talbot, S. Wales suggest that TEOMs and Negretti/Partisol systems collect different PM₁₀'s; the principle difference arising from the TEOM's heating chamber, which precipitates water-soluble ions and volatilises some organic components. This results in both the mass and compositionof the PM₁₀'s being altered. Particle size distributionsfor Negretti and Partisol collections highlighted differences mainly attributed to different flow rates. The results of thiswork demonstrate that simple correlations between PM₁₀ massand adverse health effects are problematic. Furthermore, elucidation of the complex fractionation and chemical changes indifferent collectors is necessary.