The network imaginary: coherence and creativity within a multiscalar collaborative effort to reform US fire management

In response to the ongoing crisis in fire management, the US Fire Learning Network (FLN) engages partners in collaborative, landscape-scale ecological fire restoration. The paper contends that the FLN employs technologies, planning guidelines and media to articulate an FLN imaginary that co-ordinates independent efforts to engage in ecological fire restoration work without need of either hierarchal authority or collective social capital. This imaginary may allow the FLN to draw on the creativity and adaptive innovation of collaboration to reform fire management institutions and fire-adapted ecosystems.     

A new look at atmospheric carbon dioxide

Carbon dioxide is increasing in the atmosphere and is of considerable concern in global climate change because of its greenhouse gas warming potential. The rate of increase has accelerated since measurements began at Mauna Loa Observatory in 1958 where carbon dioxide increased from less than 1 part per million per year (ppm yr^?1) prior to 1970 to more than 2 ppm yr^?1 in recent years. Here we show that the anthropogenic component (atmospheric value reduced by the pre-industrial value of 280 ppm) of atmospheric carbon dioxide has been increasing exponentially with a doubling time of about 30 years since the beginning of the industrial revolution (～1800). Even during the 1970s, when fossil fuel emissions dropped sharply in response to the “oil crisis” of 1973, the anthropogenic atmospheric carbon dioxide level continued increasing exponentially at Mauna Loa Observatory. Since the growth rate (time derivative) of an exponential has the same characteristic lifetime as the function itself, the carbon dioxide growth rate is also doubling at the same rate. This explains the observation that the linear growth rate of carbon dioxide has more than doubled in the past 40 years. The accelerating growth rate is simply the outcome of exponential growth in carbon dioxide with a nearly constant doubling time of about 30 years (about 2%/yr) and appears to have tracked human population since the pre-industrial era.     

Back-pedaling or continuing quietly? Assessing the impact of ICLEI membership termination on cities’ sustainability actions

Over the past decade, cities have emerged as leaders in sustainability and climate protection in the United States. ICLEI, a voluntary network of local governments, played an important role driving this trend. After years of steady growth, ICLEI became a target of political opposition and its membership dropped significantly from 2010 to 2012. This begs the question of whether cities’ termination of their ICLEI affiliation diminishes their implementation of sustainability actions. Two surveys administered in 2010 and 2014 provide data on cities’ implementation of an array of sustainability actions. Using a difference-in-differences (DiD) method, the impact of ICLEI termination on local governments’ administrative and policy commitments to sustainability is assessed. The results suggest that ending ICLEI membership does not significantly impact local sustainability actions, and also indicate that the durability of policy actions may be only loosely linked to the policies that justify them.     

An exploration of the potential for re-distributed manufacturing to contribute to a sustainable,resilient city*

Abstract

Re-distributed manufacturing (RDM), broadly described as manufacturing done at a smaller-scale and locally, could be beneficial to business and urban society through creating jobs, reducing the environmental impacts of production, and improving resilience to future disturbances. Consideration of RDM within a city-region requires the consideration of a wide range of issues – societal, technical, economic and environmental. This paper presents the results of a study into the potential for RDM to contribute to a sustainable, resilient city in the face of a range of expected future disturbances on the city and on manufacturing sectors. The study took an integrated assessment approach which incorporated the development of a conceptual framework; a ‘strawman’ causal loop diagram which was reviewed by participants in a workshop; and a stock and flow system dynamics model that represents our understanding about the structure and behaviour of urban manufacturing. Several key themes emerged: similarities between RDM and traditional manufacturing, availability of physical space for RDM to be done, achieving urban resilience through RDM by enabling responsiveness to disturbances, changes in environmental impacts from production, additions or losses in jobs, the competitiveness of local manufacturing, and skills and innovation for RDM technologies. Further work is recommended.     

Rate Constants for the Reaction of OH with Halocarbons in the Presence of O2 + N2

Rates of CO₂ production in the reaction CO + OH and CO + OH + halocarbon have been used to determine rate constants for some OH + halocarbon reactions at 29.5°C relative to that of k(CO + OH) = 2.69 × 10^?13 cm³ molecule^?1 sec^?1. The following rate constants were obtained: k(OH + CH₃Cl) = 3.1 ± 0.8, k(OH + CH₂Cl₂) = 2.7 ± 1.0, k(OH + C₂H₅Cl) = 44.0 ± 25, k(OH + CICH₂CH₂CI) = 6.5, (<29) and k(OH + CH₃CCl₃) = 2.1 (<5.7) cm³ molecule^?1 sec^?1 × 10^?14. The k values, CH₂Cl₂ excepted, are in substantial agreement with determinations made in nonoxygen environments. The present results for CH₂Cl₂ are almost certainly in error due to difficulties with the competitive approach used.     

Chromium Analysis at a Ferrochrome Smelter,a Chemical Plant and a Refractory Brick Plant

Techniques were developed to sample and analyze the Cr content of participate samples with emphasis on determining the concentration of the carcinogen Cr⁺⁶. Cr⁺⁶ is extracted to alkaline solution and analyzed colorimetrically. Residual particles are extracted with acid solution to remove soluble Cr⁺³, which is determined by atomic absorption spectrometry. This methodology was tested on samples from three diverse types of sources: a ferrochrome smelter, a chemical plant, and a refractory brick plant. Identical quadruplicate samples were collected to determine accuracy and precision of the collection and analysis procedures, and extraction of Cr⁺⁶ and Cr⁺³. A statistical analysis revealed that the precision of Cr⁺⁶ analysis is comparable to that of the particulate mass determination. The stability of Cr⁺⁶ In particulate form and in solution was determined. Size resolved particulate samples were collected to determine the particle size versus the Cr⁺⁶ content. At the ferrochrome smelter and the chemical plant the majority of the Cr⁺⁶ was contained in the respirable particles. The accuracy and completeness of the chemical methods employed were verified by neutron activation analysis, x-ray photoelectron spectroscopy, and scanning electron microscopyenergy dispersive x-ray analysis.     

Meta-analysis of ecosystem services associated with oyster restoration

Restoration of foundation species promises to reverse environmental degradation and return lost ecosystem services, but a lack of standardized evaluation across projects limits understanding of recovery, especially in marine systems. Oyster reefs are restored to reverse massive global declines and reclaim valuable ecosystem services, but the success of these projects has not been systematically and comprehensively quantified. We synthesized data on ecosystem services associated with oyster restoration from 245 pairs of restored and degraded reefs and 136 pairs of restored and reference reefs across 3500 km of U.S. Gulf of Mexico and Atlantic coastlines. On average, restoration was associated with a 21-fold increase in oyster production (mean log response ratio = 3.08 [95% confidence interval: 2.58–3.58]), 34–97% enhancement of habitat provisioning (mean community abundance = 0.51 [0.41–0.61], mean richness = 0.29 [0.19–0.39], and mean biomass = 0.69 [0.39–0.99]), 54% more nitrogen removal (mean = 0.43 [0.13–0.73]), and 89–95% greater sediment nutrients (mean = 0.67 [0.27–1.07]) and organic matter (mean = 0.64 [0.44–0.84]) relative to degraded habitats. Moreover, restored reefs matched reference reefs for these ecosystem services. Our results support the continued and expanded use of oyster restoration to enhance ecosystem services of degraded coastal systems and match many functions provided by reference reefs.     

Protected area planning to conserve biodiversity in an uncertain future

Protected areas are a key instrument for conservation. Despite this, they are vulnerable to risks associated with weak governance, land-use intensification, and climate change. We used a novel hierarchical optimization approach to identify priority areas for expanding the global protected area system that explicitly accounted for such risks while maximizing protection of all known terrestrial vertebrate species. To incorporate risk categories, we built on the minimum set problem, where the objective is to reach species distribution protection targets while accounting for 1 constraint, such as land cost or area. We expanded this approach to include multiple objectives accounting for risk in the problem formulation by treating each risk layer as a separate objective in the problem formulation. Reducing exposure to these risks required expanding the area of the global protected area system by 1.6% while still meeting conservation targets. Incorporating risks from weak governance drove the greatest changes in spatial priorities for protection, and incorporating risks from climate change required the largest increase (2.52%) in global protected area. Conserving wide-ranging species required countries with relatively strong governance to protect more land when they bordered nations with comparatively weak governance. Our results underscore the need for cross-jurisdictional coordination and demonstrate how risk can be efficiently incorporated into conservation planning. Planeación de las áreas protegidas para conservar la biodiversidad en un futuro incierto     

A Regional Survey of the Microbiological Water Quality along the Shoreline of the Southern California Bight

A regional survey of the microbiological water quality along the shoreline of the Southern California Bight (SCB), from Point Conception south to Ensenada, Mexico, was conducted during August, 1998, by 36 agencies under the coordination of the Southern California Coastal Water Research Project (SCCWRP). Microbiological water quality was assessed by calculating the percentage of shoreline-mile-days that exceeded bacterial indicator thresholds for total and fecal coliforms, total/fecal ratios, and enterococci. Sample sites were selected using a stratified random sampling approach, with the SCB recreational shoreline divided into six strata: high- and low-use sandy beaches, high- and low-use rocky shoreline, and perennial and ephemeral freshwater outlets. Samples were collected on a weekly basis at a total of 253 sites, beginning on August 2^nd, 1998 and continuing for five weeks. Samples were analyzed by 22 participating labs using their normal methods (multiple tube fermentation, membrane filtration, Colilert® and/or Enterolert®). All labs met testing criteria established through intercalibration exercises and quality control check samples distributed during the sampling period. Nearly 95% of the shoreline-mile days did not exceed daily and monthly bacterial indicator thresholds, demonstrating good bacteriological water quality along the SCB shoreline. Freshwater outlets, comprised mainly of storm drains, had the poorest water quality with 60% and 40% of the shoreline-miles exceeding monthly and daily thresholds, respectively. Freshwater outlets were also more likely to demonstrate exceedances by multiple indicators at a single site, and repeat exceedances at sites over the five-week period. Compared with the southern California beaches, Mexican beaches had nearly 5 times the number of exceedances for total and fecal coliforms, and nearly 8 times the number of exceedances for total/fecal ratios.