Climate change impacts in the Middle East and Northern Africa (MENA) region and their implications for vulnerable population groups

Regional Environmental Change - The Middle East and North Africa (MENA) region emerges as one of the hot spots for worsening extreme heat, drought and aridity conditions under climate change. A...     

Sources, sinks, and exposure pathways of lead in urban garden soil

The chemistry of Pb in urban soil must be understood in order to limit human exposure to Pb in soil and produce and to implement remediation schemes. In inner-city gardens where Pb contamination is prevalent and financial resources are limited, it is critical to identify the variables that control Pb bioavailability. Field-portable X-ray fluorescence was used to measure Pb in 103 urban gardens in Roxbury and Dorchester, MA, and 88% were found to contain Pb above the USEPA reportable limit of 400 mug g(-1). Phosphorus, iron, loss on ignition, and pH data were collected, Pb-bearing phases were identified by X-ray diffraction, and Pb isotopes were measured using inductively coupled plasma mass spectrometry. Four test crops were grown both in situ and in Roxbury soil in a greenhouse, and plant tissue was analyzed for Pb uptake by polarized energy-dispersive X-ray fluorescence. Variation at the neighborhood scale in soil mineralogical and chemical characteristics suggests that the bioavailable fraction of Pb in gardens is site specific. Based on Pb isotope analysis, two historical Pb sources appear to dominate the inventory of Pb in Roxbury gardens: leaded gasoline ((207) Pb/(206) Pb = 0.827) and Pb-based paint ((207)Pb/(206) Pb = 0.867). Nearly 70% of the samples analyzed can be isotopically described by mixing these two end members, with Pb-based paint contributing 40 to 80% of the mass balance. A simplified urban human exposure model suggests that the consumption of produce from urban gardens is equivalent to approximately 10 to 25% of children's daily exposure from tap water. Furthermore, analysis of over 60 samples of plant tissue from the four test species suggests that in these urban gardens unamended phytoremediation is an inadequate tool for decreasing soil Pb.     

Review of unsaturated-zone transport and attenuation of volatile organic compound (VOC) plumes leached from shallow source zones

Reliable prediction of the unsaturated zone transport and attenuation of dissolved-phase VOC (volatile organic compound) plumes leached from shallow source zones is a complex, multi-process, environmental problem. It is an important problem as sources, which include solid-waste landfills, aqueous-phase liquid discharge lagoons and NAPL releases partially penetrating the unsaturated zone, may persist for decades. Natural attenuation processes operating in the unsaturated zone that, uniquely for VOCs includes volatilisation, may, however, serve to protect underlying groundwater and potentially reduce the need for expensive remedial actions. Review of the literature indicates that only a few studies have focused upon the overall leached VOC source and plume scenario as a whole. These are mostly modelling studies that often involve high strength, non-aqueous phase liquid (NAPL) sources for which density-induced and diffusive vapour transport is significant. Occasional dissolved-phase aromatic hydrocarbon controlled infiltration field studies also exist. Despite this lack of focus on the overall problem, a wide range of process-based unsaturated zone - VOC research has been conducted that may be collated to build good conceptual model understanding of the scenario, particularly for the much studied aromatic hydrocarbons and chlorinated aliphatic hydrocarbons (CAHs). In general, the former group is likely to be attenuated in the unsaturated zone due to their ready aerobic biodegradation, albeit with rate variability across the literature, whereas the fate of the latter is far less likely to be dominated by a single mechanism and dependent upon the relative importance of the various attenuation processes within individual site - VOC scenarios. Analytical and numerical modelling tools permit effective process representation of the whole scenario, albeit with potential for inclusion of additional processes - e.g., multi-mechanistic sorption phase partitioning, and provide good opportunity for further sensitivity analysis and development to practitioner use. There remains a significant need to obtain intermediate laboratory-scale and particularly field-scale (actual site and controlled release) datasets that address the scenario as a whole and permit validation of the available models. Integrated assessment of the range of simultaneous processes that combine to influence leached plume generation, transport and attenuation in the unsaturated zone is required. Component process research needs are required across the problem scenario and include: the simultaneous volatilisation and dissolution of source zones; development of appropriate field-scale dispersion estimates for the unsaturated zone; assessment of transient VOC exchanges between aqueous, vapour and sorbed phases and their influence upon plume attenuation; development of improved field methods to recognise and quantify biodegradation of CAHs; establishment of the influence of co-contaminants; and, finally, translation of research findings into more robust practitioner practice.     

Accumulation of platinum group elements by the marine gastropod Littorina littorea

The accumulation and trophic transfer of the platinum group elements (PGE): Rh, Pd and Pt; have been studied in short-term (5 day) exposures conducted in aquaria containing the marine macroalga, Ulva lactuca, and/or the grazing mollusc, Littorina littorea. Metals added to sea water (to concentrations of 20 μg L⁻¹) were taken up by U. lactuca in the order Rh, Pt > Pd and by L. littorea in the order Pd ≥ Pt ≥ Rh, with greatest metal accumulation in the latter generally occurring in the visceral complex and kidney. When fed contaminated alga, accumulation of Rh and Pd by L. littorea, relative to total available metal, increased by an order of magnitude, while accumulation of Pt was not readily detected. We conclude that the diet is the most important vector for accumulation of Rh and Pd, while accumulation of Pt appears to proceed mainly from the aqueous phase.     

Validating a nondestructive optical method for apportioning colored particulate matter into black carbon and additional components

Exposure of black carbon (BC) is associated with a variety of adverse health outcomes. A number of optical methods for estimating BC on Teflon filters have been adopted but most assume all light absorption is due to BC while other sources of colored particulate matter exist. Recently, a four-wavelength-optical reflectance measurement for distinguishing second hand cigarette smoke (SHS) from soot-BC was developed (Brook et al., 2010; Lawless et al., 2004). However, the method has not been validated for soot-BC nor SHS and little work has been done to look at the methodological issues of the optical reflectance measurements for samples that could have SHS, BC, and other colored particles. We refined this method using a lab-modified integrating sphere with absorption measured continuously from 350 nm to 1000 nm. Furthermore, we characterized the absorption spectrum of additional components of particulate matter (PM) on PM(2.5) filters including ammonium sulfate, hematite, goethite, and magnetite. Finally, we validate this method for BC by comparison to other standard methods. Use of synthesized data indicates that it is important to optimize the choice of wavelengths to minimize computational errors as additional components (more than 2) are added to the apportionment model of colored components. We found that substantial errors are introduced when using 4 wavelengths suggested by Lawless et al. to quantify four substances, while an optimized choice of wavelengths can reduce model-derived error from over 10% to less than 2%. For environmental samples, the method was sensitive for estimating airborne levels of BC and SHS, but not mass loadings of iron oxides and sulfate. Duplicate samples collected in NYC show high reproducibility (points consistent with a 1:1 line, R(2) = 0.95). BC data measured by this method were consistent with those measured by other optical methods, including Aethalometer and Smoke-stain Reflectometer (SSR); although the SSR looses sensitivity at filter loadings above 90 ng/mm(2). Furthermore, positive correlations (R(2) = 0.7) were observed between EC measured by NIOSH Method 5040 on quartz filters and BC measured in co-located Teflon filter samples collected from both heating and non-heating seasons. Overall, the validation data demonstrates the usefulness of this method to evaluate BC from archived Teflon filters while potentially providing additional component information.     

The role of design issues in work-related fatal injury in Australia

PROBLEM: This study aimed to provide an assessment of the contribution of design to the occurrence of fatal work-related injuries in Australia. METHODS: The Australian National Coroners' Information System was the data source for fatal injuries. Deaths resulting from workplace injuries on or between 1 July 2000 and 30 June 2002 were included. RESULTS: Seventy seven (37%) of the 210 identified workplace fatalities definitely or probably had design-related issues involved. In another 29 (14%), the circumstances were suggestive that design issues were involved. The most common scenarios involved problems with rollover protective structures and/or associated seat belts; inadequate guarding; lack of residual current devices; inadequate fall protection; failed hydraulic lifting systems in vehicles and mobile equipment; and inadequate protection mechanisms on mobile plant and vehicles. SUMMARY: Design is a significant contributor to work-related fatal injury in Australia. There is considerable scope for preventing serious work-related injury through improving design of plant, equipment, and vehicles used for work-related purposes.     

Parasitism and a shortage of refuges jointly mediate the strength of density dependence in a reef fish

Various predator-prey, host-pathogen, and competitive interactions can combine to cause density dependence in population growth. Despite this possibility, most empirical tests for density-dependent interactions have focused on single mechanisms. Here we tested the hypothesis that two mechanisms of density dependence, parasitism and a shortage of refuges, jointly influence the strength of density-dependent mortality. We used mark-recapture analysis to estimate mortality of the host species, the bridled goby (Coryphopterus glaucofraenum). Sixty-three marked gobies were infected with a copepod gill parasite (Pharodes tortugensis), and 188 were uninfected. We used the spatial scale at which gobies were clustered naturally (approximately 4 m2) as an ecologically relevant neighborhood and measured goby density and the availability of refuges from predators within each goby's neighborhood. Goby survival generally declined with increasing density, and this decline was steeper for gobies with access to few refuges than for gobies in neighborhoods where refuges were common. The negative effects of high density and refuge shortage were also more severe for parasitized gobies than for gobies free of parasites. This parasite has characteristics typical of emerging diseases and appears to have altered the strength of a preexisting density-dependent interaction.     

Nonadditive effects among threats on rare plant species

The current loss of biodiversity has put 50,000 plant species at an elevated risk of extinction worldwide. Conserving at-risk species is often complicated by covariance or nonadditivity among threats, which makes it difficult to determine optimal management strategies. We sought to demographically quantify covariance and nonadditive effects of more threats on more rare plant species than ever attempted in a single analysis. We used 1082 population reports from 186 populations across 3 U.S. states of 27 rare, herbaceous plant species collected over 15 years by citizen scientists. We used a linear mixed-effects model with 4 threats and their interactions as fixed predictors, species as a random predictor, and annual growth rates as the response. We found a significant 3-way interaction on annual growth rates; rare plant population sizes were reduced by 46% during the time immediately after disturbance when populations were also browsed by deer (Odocoileus virginianus) and had high levels of encroachment by woody species. This nonadditive effect should be considered a major threat to the persistence of rare plant species. Our results highlight the need for comprehensive, multithreat assessments to determine optimal conservation actions.