Monitoring of heavy metal concentrations in home outdoor air using moss bags

One monitoring station is insufficient to characterize the high spatial variation of traffic-related heavy metals within cities. We tested moss bags (Hylocomium splendens), deployed in a dense network, for the monitoring of metals in outdoor air and characterized metals’ long-term spatial distribution and its determinants in Girona, Spain. Mosses were exposed outside 23 homes for two months; NO₂ was monitored for comparison. Metals were not highly correlated with NO₂ and showed higher spatial variation than NO₂. Regression models explained 61-85% of Cu, Cr, Mo, Pb, Sb, Sn, and Zn and 72% of NO₂ variability. Metals were strongly associated with the number of bus lines in the nearest street. Heavy metals are an alternative traffic-marker to NO₂ given their toxicological relevance, stronger association with local traffic and higher spatial variability. Monitoring heavy metals with mosses is appealing, particularly for long-term exposure assessment, as mosses can remain on site many months without maintenance.     

Thermal decomposition of electronic wastes: mobile phone case and other parts

Pyrolysis and combustion runs at 850°C in a horizontal laboratory furnace were carried out on different parts of a mobile phone (printed circuit board, mobile case and a mixture of both materials). The analyses of the carbon oxides, light hydrocarbons, polycyclic aromatic hydrocarbons (PAHs), polychlorodibenzo-p-dioxin, polychlorodibenzofurans (PCDD/Fs), and dioxin-like PCBs are shown. Regarding semivolatile compounds, phenol, styrene, and its derivatives had the highest yields. In nearly all the runs the same PAHs were identified, naphthalene being the most common component obtained. Combustion of the printed circuit board produced the highest emission factor of PCDD/Fs, possibly due to the high copper content.     

Journal of Environmental Radioactivity special issue: international topical conference on Po and radioactive Pb isotopes

An international conference on polonium (Po) and radioactive isotopes was held in Seville Spain, 26-28 October 2009 at the Centro Nacional de Aceleradores. It was attended by 138 participants from 38 different countries. The sessions covered all aspects on Po and lead (Pb) such as radiochemistry, terrestrial and marine radioecology, kinetics, sedimentation rates, atmospheric tracers, NORM industries and dose assessment     

Assessment of aliphatic-aromatic copolyester biodegradable mulch films. Part I: field study

The objective of this work was to study the use of new biodegradable films in agriculture under open field conditions. Three biodegradable mulch films made from modified biodegradable polyester of different thicknesses and colors (black and white) and a conventional low density polyethylene (LDPE) mulch film were used to cover the beds of tomato plants. Changes in physical appearance of the films were recorded as well as changes in their mechanical, optical, and physical properties. Once tomato harvest was completed, the conventional LDPE mulch film was removed and all the tomato plants were cut using a mower. The biodegradable mulch films were plowed into the soil. The change in the appearance of the film was recorded and samples of each film after plowing were characterized according to the properties mentioned above. After the biodegradable films photodegraded, cross-link formation occurred within the films which promoted brittleness. Titanium dioxide, an additive used to produce white color in the films, catalyzed the photodegradation, while carbon black used for black color stabilized the photodegradation. The white films started to degrade after two weeks while it took about eight weeks for the black films to significantly degrade. The black biodegradable film seems to be a more promising alternative as a mulch film because of the comparable yields and weed suppression ability to conventional mulch film.     

Assessment of aliphatic-aromatic copolyester biodegradable mulch films. Part II: laboratory simulated conditions

In a previous paper, we demonstrated that the main mechanism of degradation of poly(butylene adipate-co-terephthalate) (PBAT) biodegradable mulch films when exposed to field conditions was crosslinking due to the photodegradation from solar radiation. The aim of this work was to determine the effect of crosslinking on the biodegradability of PBAT samples. PBAT films were subjected to UV photodegradation in laboratory simulated conditions to investigate the effects of crosslinking and other major changes in the structure and mechanical properties of the films. Crosslinking caused the films to become more brittle and produced a reduction of the tensile strength and percent elongation. Besides the crosslinking degradation mechanism, chain scission also occurred in the samples. After 45d of biodegradation test, the non-crosslinked PBAT sample reached 60% of mineralization. However, the percent mineralization was reduced when samples were crosslinked. The percent mineralization of samples with 10%, 30%, 50%, and 70% gel content was 36%, 43%, 21%, and 24%, respectively. Our results indicate that crosslinking is a key process underlying the degradation of the PBAT film and did affect the biodegradability of the films, since the samples with greater amount of gel content generally showed less percent mineralization in the biodegradation tests.     

Ten years measuring PCDDs/PCDFs in ambient air in Catalonia (Spain)

This work summarizes the results of a ten year surveillance programme on PCDD/F in ambient air carried out in Catalonia (Spain). The study has been conducted by the Dioxin Laboratory of Spanish Council for Scientific Research (CSIC) in collaboration with the Environment Department of the Catalonian Government. 175 samples have been collected throughout Catalonia from 1994 to 2004. Different sampling locations classified as industrial, traffic, urban, suburban and rural sites have been monitored in order to find the most contaminated zones as well as the ones with expected background concentrations. The highest concentrations found in this study were determined at the industrial locations. Concentrations ranging from 5 to 1196 fg I-TEQ/m3, with a mean value of 140 fg I-TEQ/m3 and from 10 to 357 fg I-TEQ/m3, with a mean value of 72 fg I-TEQ/m3 were determined in industrial and traffic sampling points, respectively. In contrast, the lowest concentrations were found in rural stations, ranging from 5 to 45 fg I-TEQ/m3, with a mean value of 28 fg I-TEQ/m3. The PCDD/F concentration trend in Catalonian ambient air shown a clear drop of the median values occurred during the study sampling period. A decline of about 70% was observed from 1997-1998 to 2003-2004.     

Molecular phylogeny of the American <Emphasis Type="Italic">Callinectes</Emphasis> Stimpson, 1860 (Brachyura: Portunidae), based on two partial mitochondrial genes

The genus Callinectes encompasses 16 species of commercially important swimming crabs. Most (13) occur on the Pacific and Atlantic coasts of the Americas. We compare mtDNA regions corresponding to 964 basepairs of the large (16S) and small (12S) ribosomal subunits among American Callinectes in order to examine phylogenetic relationships. The status of Callinectes affinis Fausto-Filho and Callinectes maracaiboensis Taissoun is questioned, and C. maracaiboensis is concluded to be a junior synonym of Callinectes bocourti A. Milne-Edwards, from which it cannot be consistently distinguished. We find two major lineages, one of which includes C. affinis, C. bocourti, Callinectes rathbunae Contreras, Callinectes sapidus Rathbun, and Callinectes toxotes Ordway. A second lineage is comprised of Callinectes arcuatus Ordway, Callinectes bellicosus (Stimpson), Callinectes danae Smith, Callinectes exasperatus (Gerstaecker), Callinectes larvatus Ordway, Callinectes ornatus Ordway, and Callinectes similis Williams. Definition of these clades is supported by previously described morphological differences in the length of the gonopods and shared physioecological adaptations. A calibrated molecular clock is used to estimate divergence of the two lineages near 13 mybp. Our analyses suggest that C. ornatus is the closest relative of C. arcuatus, and that C. affinis is closest to C. bocourti.