Two and three-dimensional shoreline behaviour at a MESO-MACROTIDAL barred beach

The present work investigates cross-shore shoreline migration as well as its alongshore variability (with deformation) on timescales of days to years using 6 years of time-averaged video images. The variability of the shoreline is estimated through empirical statistical methods with comprehensive reference to three scales of variability. At the meso-to macro-tidal barred Biscarrosse beach, shoreline responds in decreasing order at seasonal (winter/summer cycles, 52%), event (storms, 28%) and inter-annual scales. Whereas seasonal evolution is dominated by wave climate modulation, short-term evolution is influenced by tidal range and surf-zone sandbar characteristics. The influence of tide range and sandbars increases when timescale decreases. This is even more the case for the alongshore deformation of the shoreline which is dominated by short-term evolution. An EOF analysis reveals that the first mode of shoreline change time series is associated with cross-shore migration and explains 58% of the shoreline variability. The rest of the modes are associated to deformation which explain 42% of shoreline variability.     

Accounting for the Impact of Management Scenarios on Typha Domingensis (Cattail) in an Everglades Wetland

Environmental Management - The coupled regional simulation model, and the transport and reaction simulation engine were recently adapted to simulate ecology, specifically Typha domingensis...     

Exposure to elevated ozone levels differentially affects the antioxidant capacity and the redox homeostasis of two subtropical Phaseolus vulgaris L. varieties

Ozone (O₃) has become one of the most toxic air pollutants to plants worldwide. However, investigations on O₃ impacts on crops health and productivity in South America countries are still scarce. The present study analyzed the differences on the enzymatic and non-enzymatic antioxidant system in foliar tissue of two subtropical Phaseolus vulgaris varieties exposed to high O₃ concentration. Both varieties were negatively impacted by the pollutant, but the responses between each variety were quite distinct. Results revealed that Irai has higher constitutive levels of reactive oxygen species (ROS) and ascorbate (AsA) concentration, but lower total thiol levels and catalase immunocontent. In this variety catalase protein concentration was increased after O₃ exposure, indicating a better cellular capacity to reduce hydrogen peroxide. On the opposite, Fepagro 26-exposed plants increased ROS generation and AsA concentration, but had the levels of total thiol content and catalase protein unchanged. Furthermore, O₃ treatment reduced the levels of chlorophylls a and b, and the relationship analysis between the chlorophyll ratio (a/b) and protein concentration were positively correlated indicating that photosynthetic apparatus is compromised, and thus probably is the biomass acquisition on Fepagro 26. Differently, O₃ treatment of Irai did not affect chlorophylls a and b content, and loss on the protein content was lower. Altogether, these data suggest that early accumulation of ROS on Fepagro 26 are associated with an insufficient leaf antioxidant capacity, which leads to cell structure disruption and impairs the photosynthesis. Irai seems to be more tolerant to O₃ toxic effects than Fepagro 26, and the observed differences on O₃ sensitivity between the two varieties are apparently based on constitutive differences involved in the maintenance of intracellular redox homeostasis.     

Ozone Predictions in Atlanta,Georgia: Analysis of the 1999 Ozone Season

ABSTRACT

Ozone prediction has become an important activity in many U.S. ozone nonattainment areas. In this study, we describe the ozone prediction program in the Atlanta metropolitan area and analyze the performance of this program during the 1999 ozone-forecasting season. From May to September, a team of 10 air quality regulators, meteorologists, and atmospheric scientists made a daily prediction of the next-day maximum 8-hr average ozone concentration. The daily forecast was made aided by two linear regression models, a 3-dimensional air quality model, and the no-skill ozone persistence model. The team's performance is compared with the numerical models using several numerical indicators. Our analysis indicated that (1) the team correctly predicted next-day peak ozone concentrations 84% of the time, (2) the two linear regression models had a better performance than a 3-dimensional air quality model, (3) persistence was a strong predictor of ozone concentrations with a performance of 78%, and (4) about half of the team's wrong predictions could be prevented with improved meteorological predictions.     

Evaluating pollution-related damage and restoration success in urban forests with participatory monitoring and digital tools

Peri-urban forest monitoring requires indicators of vegetation damage. An example is the sacred fir (Abies religiosa) forests surrounding Mexico City, which have been heavily exposed to tropospheric ozone, a harmful pollutant, for over 4 decades. We developed a participatory monitoring system with which local community members and scientists generated data on ozone tree damage. Santa Rosa Xochiac rangers (13) used the digital tool KoboToolBox to record ozone damage to trees, tree height, tree ages, tree condition, tree position, and whether the tree had been planted. Thirty-five percent of the trees (n = 1765) had ozone damage. Younger trees had a lower percentage of foliage damaged by ozone than older trees (p < 0.0001), and asymptomatic trees tended to be younger (p < 0.0001). Symptomatic trees were taller than asymptomatic trees of the same age (R²_c = 0.43, R²_m = 0.27). Involving local communities facilitated forest monitoring and using digital technology improved data quality. This participatory system can be used to monitor forest condition change over time and thus aids restoration efforts driven by government or local communities’ interests, facilitating local decision-making.     

Assessing heavy metal pollution by biomonitoring honeybee nectar in Córdoba (Spain)

Environmental Science and Pollution Research - Nectar of honeybee colonies has been used in order to identify heavy metals and establish the benefit of this type of studies as a tool for...     

Degradation of organic pollutants in Mediterranean forest soils amended with sewage sludge

The degradation of two groups of organic pollutants in three different Mediterranean forest soils amended with sewage sludge was studied for nine months. The sewage sludge produced by a domestic water treatment plant was applied to soils developed from limestone, marl and sandstone, showing contrasting alkalinity and texture. The compounds analysed were: linear alkylbenzene sulphonates (LAS) with a 10–13 carbon alkylic chain, and nonylphenolic compounds, including nonylphenol (NP) and nonylphenol ethoxylates with one and two ethoxy groups (NP1EO + NP2EO). These compounds were studied because they frequently exceed the limits proposed for sludge application to land in Europe. After nine months, LAS decomposition was 86–96%, and NP + NP1EO + NP2EO decomposition was 61–84%, which can be considered high. Temporal trends in LAS and NP + NP1EO + NP2EO decomposition were similar, and the concentrations of both types of compounds were highly correlated. The decomposition rates were higher in the period of 6–9 months (summer period) than in the period 0–6 months (winter + spring period) for total LAS and NP + NP1EO + NP2EO. Differences in decay rates with regard to soil type were not significant. The average values of decay rates found are similar to those observed in agricultural soils.     

Environmental education for small- and medium-sized enterprises: methodology and e-learning experience in the Valencian region

The last decades have shown an increasing social demand for environmental awareness, which firms are inevitably required to adapt to. More and more, small- and medium-sized enterprises (SMEs) are finding it necessary to train their staff in environmental issues if they wish to survive in a market where it is no longer sufficient to excel in price competitiveness exclusively, but where quality, service and environmental standards also play an important role.     

Construction Job Safety Analysis

Job Safety Analysis (JSA), which is also known as Job Hazard Analysis, is an efficient proactive measure for safety risk assessment used in industrial manufacturing settings. However, unlike the manufacturing settings for which JSA was developed, at construction sites the physical environment is constantly changing, workers move through the site in the course of their work, and they are often endangered by activities performed by other teams. To address this difficulty, a structured method for hazard analysis and assessment for construction activities, called “Construction Job Safety Analysis” (CJSA), was developed. The method was developed within the framework of research toward a lean approach to safety management in construction, which required the ability to predict fluctuating safety risk levels in order to support safety conscious planning and pulling of safety management efforts to the places and times where they are most effective. The method involves identification of potential loss-of-control events for detailed stages of the activities commonly performed in construction, and assessment of the probability of occurrence for each event identified. It was applied to explore 14 primary construction activities in an extensive trial implementation that included expert workshops and a series of 101 interviews with site engineers and superintendents. Detailed quantitative results were obtained for a total of 699 possible loss-of-control events; the most frequent events are those related to exterior work at height.     

Contamination Levels and Preliminary Assessment of the Technical Feasibility of Employing Natural Attenuation in 5 Priority Areas of Presidente Bernardes Refinery in Cubatão, São Paulo, Brazil

Five priority areas of potential impact by contaminants (API) were investigated at the Presidente Bernardes Refinery in Cubatão, São Paulo, Brazil with the following aims: (i) to identify both organic and inorganic contaminants present in soil and groundwater; (ii) to define the environmental conditions relevant for microbial activity at the site and (iii) to evaluate the feasibility of employing natural attenuation for treatment of the hydrocarbon contamination. One area (API 1) was an uncontrolled landfill, where waste materials from the refinery were deposited between 1954 and 1986, and four areas (API 4, 5, 7 and 11) were located in the operational section of the refinery. Soil contamination by regulated BTEX compounds (benzene, toluene, total xylenes) was restricted to two samples from API 1. Nonregulated ethylbenzene was detected in one soil sample from API 4, one from API 5 and two from API 1. No soil contained regulated PAH above threshold levels. Several nonregulated PAHs were found in 6 soil samples from API 1, 3 soil samples from API 4 and 1 soil sample from API 5. Site soils contained very high aluminium concentrations, but metal contamination was restricted to one soil sample from API 1, which contained nickel above threshold limits. BTEX contamination of groundwater was due mostly to benzene. Of the 17 PAH molecules tested, only naphthalene and 2-methylnaphthalene occurred in groundwater. The sum of total BTEX and total PAH exceeded 200 μg/L in only a few monitoring wells in API 4, 5 and 11 and was always below 2.640 μg/L. Be, Cd, Cr, Cu, Hg, Ni, Se, Ag, Tl and Zn were not detected in groundwater, which was contaminated in a few locations by aluminium (mostly below 1 mg/L), lead (<0.066 mg/L) and arsenic (<0.056 mg/L). S, K, Ca, Mg and Fe were present in groundwater in excess of physiological requirements for microbial growth, but low concentrations of N and P could become growth limiting. However, BTEX were efficiently degraded in saturated and unsaturated zone microcosms and nutrient amendments did not stimulate biodegradation rates measurably. The inorganic carbon pool in groundwater was up to one order of magnitude larger than the organic carbon pool. Total inorganic carbon (TIC) in API groundwater exceeded TIC of clean groundwater by factors of 2 (API 4), 6 (API 5, 7 and 11) or 10 (API 1). Most of the inorganic carbon incorporated into groundwater beneath the refinery originated from biodegradation in the unsaturated soil, which contained a microbiota (10⁶ cells/g on average) capable of growth with most of the pure (benzene, toluene, ethylbenzene and xylene) and mixed hydrocarbons tested (diesel oil, gasoline, naphtha, condensate, aromatic residue and fuel oil). A viscous hydrocarbon paste uncovered in API 1 was insoluble in water but dissolved in dichloromethane. Many organic components of this paste were biodegradable as evidenced by weight reduction of the hydrocarbon paste and by the growth of suspended and attached biomass in saturated zone microcosms, where the paste was the only carbon source. This study indicates that monitored natural attenuation may be a technically feasible and efficient means for plume control in API 1, 4 and 5, provided the plumes in API 4 and 5 are not expanding. This technique is not suitable for contaminant reduction in API 11.