Daytime resolved analysis of polycyclic aromatic hydrocarbons in urban aerosol samples - impact of sources and meteorological conditions

Urban aerosol was collected in a summer and a winter campaign for 7 and 3 days, respectively. Low volume samples were taken with a time resolution of 160 min using a filter/sorption cartridge system extended by an ozone scrubber. Concentrations of mainly particle associated polycyclic aromatic hydrocarbons (PAH) and oxidised PAH (O-PAH) were determined by gas chromatography/high resolution mass spectrometry. The sampling site was located in the city centre of Augsburg, Germany, near major roads with high traffic volume. The daily concentrations and profiles were mainly governed by local emissions from traffic and domestic heating, as well as by the meteorological conditions. During the winter campaign, concentrations were more than 10 fold higher than during the summer campaign. Highest concentrations were found concurrent with low boundary layer heights and low wind speeds. Significant diurnal variation of the PAH profiles was observed. Enhanced influences of traffic related PAH on the PAH profiles were evident during daytime in summer, whereas emissions from hot water generation and domestic heating were obvious during the night time of both seasons. A general idea about the global meteorological situation was acquired using back trajectory calculations (NOAA ARL HYSPLIT4). Due to high local emissions in combination with low air exchange during the two sampling campaigns, effects of mesoscale transport were not clearly observable.     

Modeling the decline of labor-sharing in the semi-desert region of Chile

Regional Environmental Change - The rapid environmental changes currently underway in many dry regions of the world, and the deep uncertainty about their consequences, underscore a critical...     

Greening flood protection through knowledge processes: lessons from the Markermeer dikes project in the Netherlands

Greening flood protection (GFP) is increasingly recognized as an adaptive and flexible approach to water management that is well suited to addressing uncertain futures associated with climate change. In the last decade, GFP knowledge and policies have developed rapidly, but implementation has been less successful and has run into numerous barriers. In this paper, we address the challenge of realizing green flood protection goals by specifically considering knowledge in the decision-making of a Dutch flood protection project in Lake Markermeer. In this project, an ecological knowledge arrangement and a traditional flood protection knowledge arrangement are compared and their interactions analysed. The analysis provides insight into the specific difficulties of implementing GFP measures and identifies ways to realize GFP goals. The primary challenge is twofold: First, a self-reinforcing cycle of knowledge production and decision-making in the flood protection domain inhibits the introduction of innovative and multifunctional approaches such as GFP; second, the distribution of power is severely unbalanced in terms of ecological enhancement and flood protection, favouring the latter. Implementation of GFP requires structural change and the integration of ecological and flood protection knowledge and policy. Potentially rewarding routes towards this integration are the exploration of shared interests in GFP and the creation of mutual dependency between knowledge arrangements. The case study and the insights it provides show that GFP is far from mainstream practice and that implementation requires serious effort and courage to break with historical practices.     

Comparison of micrometeorological and two-film estimates of air–water gas exchange for alpha-hexachlorocyclohexane in the Canadian archipelago

The air-sea gas exchange of alpha-hexachlorocyclohexane (α-HCH) in the Canadian Arctic was estimated using a micrometeorological approach and the commonly used Whitman two-film model. Concurrent shipboard measurements of α-HCH in air at two heights (1 and 15 m) and in surface seawater were conducted during the Circumpolar Flaw Lead study in 2008. Sampling was carried out during eight events in the early summer time when open water was encountered. The micrometeorological technique employed the vertical gradient in air concentration and the wind speed to estimate the flux; results were corrected for atmospheric stability using the Monin-Obukhov stability parameter. The Whitman two-film model used the concentrations of α-HCH in surface seawater, in bulk air at 1 and 15 m above the surface, and the Henry's law constant adjusted for temperature and salinity to derive the flux. Both approaches showed that the overall net flux of α-HCH was from water to air. Mean fluxes calculated using the micrometeorological technique ranged from -3.5 to 18 ng m(-2) day(-1) (mean 7.4), compared to 3.5 to 14 ng m(-2) day(-1) (mean 7.5) using the Whitman two-film model. Flux estimates for individual events agreed in direction and within a factor of two in magnitude for six of eight events. For two events, fluxes estimated by micrometeorology were zero or negative, while fluxes estimated with the two-film model were positive, and the reasons for these discrepancies are unclear. Improvements are needed to shorten air sampling times to ensure that stationarity of meteorological conditions is not compromised over the measurement periods. The micrometeorological technique could be particularly useful to estimate fluxes of organic chemicals over water in situations where no water samples are available.     

Transformation and biodegradation of 1,2,3-trichloropropane (TCP)

PURPOSE: 1,2,3-Trichloropropane (TCP) is a persistent groundwater pollutant and a suspected human carcinogen. It is also is an industrial chemical waste that has been formed in large amounts during epichlorohydrin manufacture. In view of the spread of TCP via groundwater and its toxicity, there is a need for cheap and efficient technologies for the cleanup of TCP-contaminated sites. In situ or on-site bioremediation of TCP is an option if biodegradation can be achieved and stimulated. This paper presents an overview of methods for the remediation of TCP-contaminated water with an emphasis on the possibilities of biodegradation. CONCLUSIONS: Although TCP is a xenobiotic chlorinated compound of high chemical stability, a number of abiotic and biotic conversions have been demonstrated, including abiotic oxidative conversion in the presence of a strong oxidant and reductive conversion by zero-valent zinc. Biotransformations that have been observed include reductive dechlorination, monooxygenase-mediated cometabolism, and enzymatic hydrolysis. No natural organisms are known that can use TCP as a carbon source for growth under aerobic conditions, but anaerobically TCP may serve as electron acceptor. The application of biodegradation is hindered by low degradation rates and incomplete mineralization. Protein engineering and genetic modification can be used to obtain microorganisms with enhanced TCP degradation potential.     

A Generic Bio-Economic Farm Model for Environmental and Economic Assessment of Agricultural Systems

Bio-economic farm models are tools to evaluate ex-post or to assess ex-ante the impact of policy and technology change on agriculture, economics and environment. Recently, various BEFMs have been developed, often for one purpose or location, but hardly any of these models are re-used later for other purposes or locations. The Farm System Simulator (FSSIM) provides a generic framework enabling the application of BEFMs under various situations and for different purposes (generating supply response functions and detailed regional or farm type assessments). FSSIM is set up as a component-based framework with components representing farmer objectives, risk, calibration, policies, current activities, alternative activities and different types of activities (e.g., annual and perennial cropping and livestock). The generic nature of FSSIM is evaluated using five criteria by examining its applications. FSSIM has been applied for different climate zones and soil types (criterion 1) and to a range of different farm types (criterion 2) with different specializations, intensities and sizes. In most applications FSSIM has been used to assess the effects of policy changes and in two applications to assess the impact of technological innovations (criterion 3). In the various applications, different data sources, level of detail (e.g., criterion 4) and model configurations have been used. FSSIM has been linked to an economic and several biophysical models (criterion 5). The model is available for applications to other conditions and research issues, and it is open to be further tested and to be extended with new components, indicators or linkages to other models.     

Remote sampling of a CO2 point source in an urban setting

High frequency CO₂ and wind speed measurements were used to examine the urban baseline eddy covariance CO₂ flux and analyse the CO₂ rich plume from a local power station. A reliable relationship between high frequency CO₂ maxima and the rate of CO₂ emission at the power station was established. This relationship was shown to be highly dependant on wind speed. The ensemble mean plume was found to be Gaussian in horizontal profile with a width dependant on wind speed. The relationship between peak CO₂ mixing ratio and averaging time was shown to be a simple power law with a time exponent of approximately 0.5. The large, short pulses in CO₂ mixing ratio in the power plant plume were found to have an approximately Lorentzian shape. These pulses generated negative vertical eddy flux measurements so data from the plume sector were necessarily excluded from the flux baseline results. The plume-excluded flux had a similar magnitude and variability to those reported in other urban CO₂ flux studies despite this site not being ideal due to the proximity of roughness elements to the measurement point.     

Misuse of null hypothesis significance testing: would estimation of positive and negative predictive values improve certainty of chemical risk assessment?

Although generally misunderstood, the p value is the probability of the test results or more extreme results given H₀ is true: it is not the probability of H₀ being true given the results. To obtain directly useful insight about H₀, the positive predictive value (PPV) and the negative predictive value (NPV) may be useful extensions of null hypothesis significance testing (NHST). They provide information about the probability of statistically significant and non-significant test outcomes being true based on an a priori defined biologically meaningful effect size. The present study explores the utility of PPV and NPV in an ecotoxicological context by using the frequently applied Daphnia magna reproduction test (OECD guideline 211) and the chemical stressor lindane as a model system. The results indicate that especially the NPV deviates meaningfully between a test design strictly following the guideline and an experimental procedure controlling for α and β at the level of 0.05. Consequently, PPV and NPV may be useful supplements to NHST that inform the researcher about the level of confidence warranted by both statistically significant and non-significant test results. This approach also reinforces the value of considering α, β, and a biologically meaningful effect size a priori.     

Spatial distribution of perfluoroalkyl acids in the Pearl River of Southern China

An intensive campaign was conducted in September 2012 to collect surface water samples along the tributaries of the Pearl River in southern China. Thirteen perfluoroalkyl acids (PFAAs), including perfluorocarboxylates (PFCAs, C4–C11) and perfluorosulfonates (PFSAs, C4, C6–C8, and C10), were determined using high-performance liquid chromatography/negative electrospray ionization–tandem mass spectrometry (HPLC/(-)ESI–MS/MS). The concentrations of total PFAAs (ΣPFAAs) ranged from 3.0 to 52 ng L⁻¹, with an average of 19 ± 12 ng L⁻¹. The highest concentrations of ΣPFAAs were detected in the surface water of the Dong Jiang tributary (17–52 ng L⁻¹), followed by the main stream (13–26 ng L⁻¹) and the Sha Wan stream (3.0–4.5 ng L⁻¹). Perfluorooctanoate (PFOA), perfluorobutane sulfonate (PFBS), and perfluorooctane sulfonate (PFOS) were the three most abundant PFAAs and on average accounted for 20%, 24%, and 19% of ΣPFAAs, respectively. PFBS was the most abundant PFAA in the Dong Jiang tributary, and PFOA was the highest PFAA in the samples from the main stream of the Pearl River. A correlation was found between PFBS and PFOA, which suggests that both of these PFAAs originate from common source(s) in the region. Nevertheless, the slope of PFBS/PFOA was different in the different tributaries sampled, which indicates a spatial difference in the source profiles of the PFAAs.     

Levels and distribution of Dechlorane Plus in coastal sediments of the Yellow Sea, North China

Dechlorane Plus (DP) has been determined in surface sediments from three Chinese coastal bays, e.g. Jiaozhou, Sishili and Taozi Bay in North China. DP concentrations ranged from <1.2 to 187 pg g⁻¹ dry weight (dw) (mean: 24.7 pg g⁻¹ dw) in Jiaozhou Bay, <1.2 to 135 pg g⁻¹ dw (mean 69.9 pg g⁻¹ dw) in Sishili Bay and <1.2 to 66.7 pg g⁻¹ dw (mean: 40.4 pg g⁻¹ dw) in Taozi Bay, respectively. Additionally, two dechlorinated species were quantified, which accounted for 0.6-5.1% of the ∑DP concentration.The f_syn values (syn-isomer/(syn- + anti-isomer)) in sediments from Jiaozhou Bay (mean 0.29) were close to the technical DP mixture (0.2-0.4), probably indicating local inputs of DP. In contrast, sediments in Sishili and Taozi Bay showed much lower f_syn values (mean 0.16). During transportation the DP isomers are subject to stereo selective degradation which partly resulted in the relative enrichment of anti-DP in coastal sediments.