The ability of selected cladoceran species to utilize domestic wastewaters in Mexico City

The population growth patterns of four cladocerans, viz. Alona rectangula, Ceriodaphnia dubia, Moina macrocopa and Daphnia pulex on wastewaters from a treatment plant at Iztacalco, Mexico City were analyzed in this study. Crude wastewater (tank A) did not support A. rectangula and all animals in the replicates died after 5 days. A. rectangula with partially treated wastewater (tank B) showed growth curves similar to controls where algal density was 1 x 10(6) cells ml(-1). With wastewater from tank C (last stage before treatment with purifying agents such as chlorine), the populations maintained a low density (7 ind. ml(-1)). In wastewaters from tanks A and B, C. dubia showed no positive population growth, but in water from tank C, they maintained a low density (2 ind. ml(-1)). D. pulex showed no positive growth in all replicates involving wastewater. Only in controls (diet of algae Chlorella), the population density increased with time. M. macrocopa showed higher population growth in crude wastewaters than controls. Partially treated wastewater from tank B also resulted in a greater population growth than in the controls. However, when wastewater from the tank C was used, the population declined after day 12. Under comparable conditions, A. rectangula reached much higher peak abundances (55 ind. ml(-1)) than the rest of the cladoceran species. The rates of population growth (r) of the tested cladoceran species followed trends similar to the peak population densities. A. rectangula had the highest growth rates (0.25 per day) in controls and from the wastewater from tank B. The r-values were negative for A. rectangula and C. dubia in crude wastewater. For M. macrocopa the r-values were higher (0.19) in crude wastewater than in algae (0.15). However, r-values of M. macrocopa became negative when cultured in treated wastewater from tank C.     

Enumeration of waterborne Escherichia coli with petrifilm plates: comparison to standard methods

Escherichia coli is often monitored in environmental waters as an indicator of the possible presence of human pathogens associated with feces. Petrifilm E. coli/coliform count plates (3M, Minneapolis, MN), previously validated for enumerating E. coli in food, were tested for monitoring E. coli in environmental water. Escherichia coli counts in environmental water samples enumerated with Petrifilm were significantly correlated (R > 0.9; slope = 0.9-1.0; p < 0.001) with counts obtained with three commonly used methods, mTEC (Becton Dickinson, Sparks, MD), m-ColiBlue (Hach, Loveland, CO), and Colilert-18/IDEXX Quanti-Tray 2000 (IDEXX, Westbrook, ME). Blue colonies on Petrifilm plates were most reliably identified as E. coli when accompanied by gas formation, as determined by characterization of the colonies on MacConkey agar plates (PML Microbiologicals, Mississauga, ON, Canada) and by polymerase chair reaction (PCR) with E. coli-specific primers. The main disadvantage of Petrifilm plates for environmental water testing is the small volume (1 mL per sample) that can be tested; however, the plates appear to be suitable for screening and locating sites that exceed criteria for total body and partial body contact. Simplicity of use and storage, reliability, and relatively low cost make Petrifilm plates suitable for volunteer-based and educational water quality monitoring applications, particularly when used as a preliminary screening method to identify problem sites.     

Private micro-hydro power and associated investments in Nepal: the Barpak village case and broader issues

This article examines a number of issues connected with the development of small-scale hydroelectric power and related investments in Nepal. The micro-hydro investment scheme in Barpak village serves as a case study, and the article also presents a number of related issues discussed against the background of the evolution of micro-hydro power in Nepal. The article outlines the success of micro-hydro development, modest in relation to its enormous potential, the realization of which depends on whether a number of challenges and constraints can be overcome. The article closes with suggestions on implementing sustainable micro-hydro development in rural areas, based on the Barpak experience and the authors' other recent studies of rural energy issues in Nepal.     

Spatio-temporal variations of biomass and abundance in bathyal non-crustacean megafauna in the Catalan Sea (North-western Mediterranean)

The spatio-temporal variations in diversity, biomass and abundance of bathyal invertebrates (excluding decapod crustaceans, which have been analysed elsewhere) from the North-western Mediterranean margin are described. The upper canyon (∼450 m), middle slope (∼650 m) and lower slope (∼1,200 m) habitats were investigated throughout the year. The first two sites are visited daily by a specialised commercial fisheries’ fleet, while the deeper site has not been impacted by fishing activities. A total of 140 species from 12 phyla were collected from the 3 study areas. Of these, the Mollusca, Echinodermata, Polychaeta and Cnidaria were the most speciose groups. The patterns of species diversity (H′) and evenness (E) were similar in time and space. The upper canyon and middle-slope sites were dominated by echinoderms and molluscs, while the lower-slope site was dominated by cnidarians and sponges. Multifactorial ANOVA showed significant spatio-temporal differences in the biomass and/or abundance only in echinoderms, molluscs, cnidarians and polychaetes. The faunal differences observed were explained by habitat type, but not by season. The role of submarine canyons and commercial fishing on shaping the diversity and biomass of bathyal Mediterranean invertebrates is discussed. Luis Dantart: Deceased March 2005     

Energy consumption analysis of ABS plastic parts injected in a hybrid injection moulding machine

The energy analysis of injection moulding processes is influenced by complex interactions amongst the moulded part, its material, the injection machine, the process parameters and the environmental conditions. The availability of energy usage analyses that comprehend information on specific materials and machine kind is limited. This paper reports a study that estimates and analyses the power usage profile (PUP), the specific energy consumption (SEC), and the energy distribution at an operation level of two different injected parts made of acrylonitrile-butadiene-styrene and produced in a hybrid injection moulding machine. The methodology followed by the authors incorporates an experiment carried out in an industrial facility. A large sample size, and data-acquisition and data post-processing processes to obtain an accurate PUP and SEC are used. A breakdown of the energy consumed by the injection moulding process of the parts studied at an operation level using Sankey diagrams is discussed. The study results are used to identify strategies to reduce the energy consumed by the processes. The methodology employed, and the strategies reported could be used with other plastic parts regardless of the material and machine used. The results reported are new experimental data useful input for theoretical models.     

A semi-target analytical method for quantification of OH-PCBs in environmental samples

Environmental Science and Pollution Research - Hydroxylated polychlorinated biphenyls (OH-PCBs) are oxidative metabolites of PCBs and residuals found in original Aroclors. OH-PCBs are known to play...     

Regression models to estimate total concentrations of polybrominated diphenyl ethers: data from NHANES 2003–2004

The objective of this study was to develop regression models to estimate the total concentration of polybrominated diphenyl ethers in serum based on the known concentrations of a limited number of congeners. Because of the possible adverse health effects associated with the exposure to polybrominated diphenyl ethers, it is of interest to know their total concentrations. Data from the National Health and Nutrition Examination Survey for 2003–2004 (N = 1859) were used to develop regression models to estimate both wet weight and lipid-adjusted total concentrations. Only the knowledge of three congeners, namely, 2,2′,4,4′-tetrabromodiphenyl ether, 2,2′,4,4′,5-pentadibromodiphenyl ether, and 2,2′,4,4′,5,5′-hexabromodiphenyl ether was required to use these models. Other than the concentrations of these three congeners, age, gender, and smoking status were the only information needed to use these models. Optionally, models were developed that could also use the race/ethnicity of the participants. All models explained more than 98% of the known variability in the observed total concentration levels. Over 98% of the model generated, predicted values were found to be within 5% of the observed values.     

A simultaneous equations model of crash frequency by collision type for rural intersections

Safety at roadway intersections is of significant interest to transportation professionals due to the large number of intersections in transportation networks, the complexity of traffic movements at these locations that leads to large numbers of conflicts, and the wide variety of geometric and operational features that define them. A variety of collision types including head-on, sideswipe, rear-end, and angle crashes occur at intersections. While intersection crash totals may not reveal a site deficiency, over exposure of a specific crash type may reveal otherwise undetected deficiencies. Thus, there is a need to be able to model the expected frequency of crashes by collision type at intersections to enable the detection of problems and the implementation of effective design strategies and countermeasures. Statistically, it is important to consider modeling collision type frequencies simultaneously to account for the possibility of common unobserved factors affecting crash frequencies across crash types. In this paper, a simultaneous equations model of crash frequencies by collision type is developed and presented using crash data for rural intersections in Georgia. The model estimation results support the notion of the presence of significant common unobserved factors across crash types, although the impact of these factors on parameter estimates is found to be rather modest.     

Measurement of total site mercury emissions from a chlor-alkali plant using ultraviolet differential optical absorption spectroscopy and cell room roof-vent monitoring

This technical note describes a United States Environmental Protection Agency (U.S. EPA) measurement project to determine elemental mercury (Hg⁰) emissions from a mercury cell chlor-alkali (MCCA) facility in the southeastern U.S. during a 53-day monitoring campaign in the fall of 2006. The optical remote sensing (ORS) area source measurement method EPA OTM 10 was used to provide Hg⁰ flux data for the site. These results are reported and compared with cell room roof-vent monitoring data acquired by the facility for similar time periods. The 24-h extrapolated mercury emission rate estimates determined by the two monitoring approaches are shown to be similar with overall averages in the 400 g day^?1 range with maximum values around 1200 g day^?1. Results from the OTM 10 measurements, which include both cell room emissions and potential fugitive sources outside the cell room, are shown to be approximately 10% higher than cell room monitoring results indicating that fugitive emissions from outside the cell room produce a small but measurable effect for this site.