Water resource conservation promotes synergy between economy and environment in China’s northern drylands

•Considering evenness provides a more accurate assessment of sustainable development. •Water resource conservation drives industrial transformation. •Synergy between economic development and environmental protection is achieved. •Regional collaboration over water could promote sustainable development in drylands. Water resource availability is the major limiting factor for sustainable development in drylands. Climate change intensifies the conflicting water demands between people and the environment and highlights the importance of effective water resource management for achieving a balance between economic development and environmental protection. In 2008, Inner Mongolia, typical dryland in northern China, proposed strict regulations on water exploitation and utilization aimed at achieving sustainable development. Our study is the first to investigate the effectiveness and performance of these long-standing water conservation regulations. Our analyses found that the regulations drove industrial transformation, evidenced by the decreasing proportion of environmentally harmful industries such as coal and steel, and the increasing proportion of tertiary industries (especially tourism). Following industrial transformation, economic development decoupled from industrial water consumption and subsequently led to reduced negative environmental impacts. Based on these results, adaptive strategies were developed for 12 cities by revealing and integrating their development pathways and relative status in achieving sustainable development. Integration and cooperation between cities were proposed, e.g., a water trade agreement between eastern Inner Mongolia (an economically underdeveloped region with relatively abundant water resources) and central Inner Mongolia (an economically developed region with high water stress). Such an agreement may enable the holistic achievement of sustainable development across regions. By integrating the findings of our research, our study presents a reproducible framework for water-management-based sustainable development strategies in drylands.     

Impact of anthropogenic heat emissions on meteorological parameters and air quality in Beijing using a high-resolution model simulation

• The Large scale Urban Consumption of energY model was updated and coupled with WRF. • Anthropogenic heat emissions altered the precipitation and its spatial distribution. • A reasonable AHE scheme could improve the performance of simulated PM_2.5. • AHE aggravated the O₃ pollution in urban areas. Anthropogenic heat emissions (AHE) play an important role in modulating the atmospheric thermodynamic and kinetic properties within the urban planetary boundary layer, particularly in densely populated megacities like Beijing. In this study, we estimate the AHE by using a Large-scale Urban Consumption of energY (LUCY) model and further couple LUCY with a high-resolution regional chemical transport model to evaluate the impact of AHE on atmospheric environment in Beijing. In areas with high AHE, the 2-m temperature (T₂) increased to varying degrees and showed distinct diurnal and seasonal variations with maxima in night and winter. The increase in 10-m wind speed (WS₁₀) and planetary boundary layer height (PBLH) exhibited slight diurnal variations but showed significant seasonal variations. Further, the systematic continuous precipitation increased by 2.1 mm due to the increase in PBLH and water vapor in upper air. In contrast, the precipitation in local thermal convective showers increased little because of the limited water vapor. Meanwhile, the PM_2.5 reduced in areas with high AHE because of the increase in WS₁₀ and PBLH and continued to reduce as the pollution levels increased. In contrast, in areas where prevailing wind direction was opposite to that of thermal circulation caused by AHE, the WS₁₀ reduced, leading to increased PM_2.5. The changes of PM_2.5 illustrated that a reasonable AHE scheme might be an effective means to improve the performance of PM_2.5 simulation. Besides, high AHE aggravated the O₃ pollution in urban areas due to the reduction in NO_x.     

Fe~0体系降解2,4二氯酚的影响因素及其反应机理

采用铁屑、炉渣及河砂混合介质降解2,4-二氯酚（2,4-DCP）模拟废水,研究铁屑粒径、铁屑投加量、铁屑与炉渣配比、pH值等因素对2,4-DCP脱氯效果的影响,探讨Fe0体系降解2,4-DCP的反应机理。结果表明,铁屑粒径、铁屑投加量、铁屑与炉渣配比、pH对2,4-DCP脱氯效果均有显著影响,在铁屑粒径为2～5 mm、不改变废水pH、铁屑与炉渣质量比为31∶9条件下,Fe0体系对2,4-DCP去除率高达97%。2,4-DCP经脱氯后主要产物为2-氯酚、4-氯酚和苯酚,反应后废水的可生化性明显提高,利于后续的生物处理。     

高层建筑安全核区域防排烟技术探讨

本文在某高层安全核区域设计了一系列现场实验,通过送风系统和机械排烟的不同开启、关闭组合方式,定性判断送风与排烟的相互作用。结果显示：在送风量略大于排烟量的前提下,烟气层能够稳定在一定的高度,对人员的安全疏散是最有利的。因此,本文提出在满足楼梯间及其前室足够正压值的前提下,改造现有的送风系统,利用多余的正压值进行补气,以优化高层建筑内的防排烟效果。     

多粘类芽孢杆菌GA1产絮凝剂的培养基和分段培养工艺

对1株从土壤中筛选的产絮凝剂微生物GA1进行了研究.该菌株经形态学特征、生理生化反应及16S rDNA序列(GenBank序列登陆号为DQ166375)相似性分析鉴定为多粘类芽孢杆菌,并命名为Paenibacillus polymyxa GA1.对其进行了产絮凝剂培养条件和培养工艺的研究.结果表明:GA1产絮凝剂的最佳培养基成分(g/L)为蔗糖40.0、酵母浸膏4.0、K₂HPO₄5.0、KH₂PO₄、2.0、NaCl 0.1、MgSO₄ 0.2.研究了该菌株产絮凝剂的最佳培养条件,包括培养基的初始pH、培养温度、摇床速度和接种量.同时针对其产絮凝剂和菌体生长的关系,首次将分段培养工艺应用于GA1产絮凝剂中,即在培养的初期24h内采用菌体生长最佳培养条件,在培养后期采用菌体产絮凝剂的最佳培养条件.结果表明,采用分段培养的工艺,既可保证GA1絮凝剂的产量,又能缩短培养周期.     

Identification of two mutations for ataxia telangiectasia among the Druze community

Ataxia telangiectasia (AT) is a rare autosomal recessive disease characterized by progressive cerebellar ataxia, immunodeficiency, susceptibility to lymphoreticular malignancies and cancer predisposition, hypersensitivity to ionic radiation and chromosomal instability. In this study, we report a founder effect of AT with two different mutations: 1339 C > T and 6672 del GG together with 6677 del TACG, found in four Israeli Druze clans originating from three different Druze centers in the Middle East (Lebanon, Syria and Jordan). The 1339 C > T mutation, which results in a stop codon at position 447 of the ATM protein, was observed in two unrelated clans originating from Lebanon and Jordan. The 6672 del GG/6677 del TACG mutation was observed in two unrelated clans originating from Syria and Lebanon. In the present study, simple and fast detection assays were developed for both mutations. The ability to identify AT carriers routinely provides a unique opportunity for prenatal diagnosis, genetic counseling as well as marriage guidance in the Druze community. Copyright © 2004 John Wiley & Sons, Ltd.     

厌氧折流板反应器处理土霉素废水的潜能和运行特性研究

采用固定水力停留时间(HRT)、逐步提高进水土霉素(OTC)浓度的方式,考察了四格室厌氧折流板反应器(ABR)处理土霉素废水的潜能和运行特性,以期为工程实践提供理论指导和技术参考.结果表明,ABR在pH=7.00~7.50、(35±1)℃、HRT=24 h、进水初始COD为2000.0mg·L-1的条件下启动,经49 d的运行,在进水COD为4500.0 mg·L-1、OTC为0.1 g·m-3·d-1、pH=7.20条件下达到了稳定状态,系统COD去除效率稳定在95.0%左右.在维持进水COD和HRT不变的条件下,通过增加进水OTC浓度的方式将OTC的负荷分阶段提高为1.0、3.3和5.0g·m-3·d-1的过程中,ABR对OTC的去除率略有下降,从59.9%降低到了57.7%,而对COD的去除率则始终保持在95%上下.可见,ABR处理土霉素废水具有有效性和运行稳定性,是值得深入研发的土霉素废水处理工艺.     

某炮弹地面制导装备可修复维修器材保障研究

目的对某炮弹地面制导装备可修复维修器材的保障进行探讨。方法对维修器材的可修复性、修理级别进行分析,研究可修复器材的管理包括可修复器材的技术、质量和供应管理,可修复器材的筹措和报废。结果制定了可修复器材的确定步骤,编制了可修复器材的管理细则。结论编制了紧贴标准和实际、有经济效益的可修复器材划分标准,在可修复器材筹措、供应、管理、回收等环节建立了统一、规范的规章制度。     

不同构型人工湿地基质中土著菌的耐药性及整合子丰度调查

采用Kirby-Bauer纸片琼脂扩散法分析了夏、冬季节9个不同构型人工湿地中的葡萄球菌(Staphylococcus)、假单胞菌(Pseudomonas)两种土著菌对7种常用抗生素的耐药性,并通过荧光定量PCR检测人工湿地基质中Ⅰ型整合子(int1)的丰度.结果表明,共分离出的522株葡萄球菌和543株假单胞菌,约84%的菌株对所测试的抗生素具有耐药性,多重耐药率达到68%以上,MRI指数平均为0.22,与某些环境中人源或动物源细菌耐药水平相当,表明人工湿地基质土著菌具有较高水平的耐药性;两种土著菌对氨苄西林和复方新诺明的耐药率较高,四环素、庆大霉素和环丙沙星的耐药率均极低(3%),而对头孢他啶和氯霉素的耐药性呈现差别.湿地基质中int1基因的浓度为1.14×105~5.66×105copies·g-1,其相对丰度为0.54%~3.68%.季节和湿地工艺对细菌耐药和整合酶基因分布有较大影响.夏季2种细菌的抗生素耐药率、多重耐药指数和int1丰度均显著高于冬季;下行垂直流湿地中的抗生素耐药率、多重耐药指数(MRI)最高,而在水平潜流湿地中int1丰度最高.研究表明人工湿地基质的土著菌长期暴露在一定浓度抗生素和耐药肠道菌的生活污水环境下获得了耐药性,人工湿地中抗生素耐药菌和耐药基因的污染及环境风险不容忽视.     

An optimized two-step derivatization method for analyzing diethylene glycol ozonation products using gas chromatography and mass spectrometry

The ozonation of hydroxyl compounds(e.g., sugars and alcohols) gives a broad range of products such as alcohols, aldehydes, ketones, and carboxylic acids. This study developed and optimized a two-step derivatization procedure for analyzing polar products of aldehydes and carboxylic acids from the ozonation of diethylene glycol(DEG) in a non-aqueous environment using gas chromatography–mass spectrometry. Experiments based on Central Composite Design with response surface methodology were carried out to evaluate the effects of derivatization variables and their interactions on the analysis. The most desirable derivatization conditions were reported, i.e., oximation was performed at room temperature overnight with the o-(2,3,4,5,6-pentafluorobenzyl) hydroxyl amine to analyte molar ratio of 6, silylation reaction temperature of 70°C, reaction duration of 70 min, and N,O-bis(trimethylsilyl)-trifluoroacetamide volume of 12.5 μL. The applicability of this optimized procedure was verified by analyzing DEG ozonation products in an ultrafine condensation particle counter simulation system.