Characterization of chlorine dioxide as disinfectant for the removal of low concentration microcystins

Microcystins, which represents one kind of cancerogenic organic compounds, is abundant in eutrophication water. The effects of reaction factors on chlorine dioxide (ClO₂) for removal of low-concentration Microcystin-LR, Microcystin-RR, and Microcystin-YR in water as well as the reaction mechanisms was investigated by using enzyme-linked immunosorbent assay (ELISA) kit and gas chromatography-mass spectrometry (GC-MS). The results showed that MC-LR, MC-RR, and MC-YR could be efficiently decomposed by ClO₂. The degradation efficiency was shown positively correlated to the concentration of ClO₂ and reaction time; while the effect of reaction temperature and pH is slight. The kinetic constants and activation energies of the reaction of MC-LR, MC-RR, and MC-YR with ClO₂ are determined as 459.89, 583.15, 488.43 L·(mol·min)⁻¹ and 64.78, 53.01, 59.15 kJ·mol⁻¹, respectively. As indicated by high performance liquid chromatography mass spectrometer (HPLC-MS) analysis, degradation should be accomplished via destruction of Adda group by oxidation, with the formation of dihydroxy substituendums as end products. This study has provided a fundamental demonstration of ClO₂ serving as oxidizing disinfectant to eliminate microcystins from raw water source.     

弃渣场滑坡影响因素敏感性计算分析

结合典型弃渣场工程实例,引入正交试验设计和方差分析理论,基于Morgenstern-Price严格条分法对弃渣场滑坡影响因素敏感性进行了计算分析。结果表明:坡率、内聚力、内摩擦角对弃渣场坡体稳定性影响高度显著,而坡高、渣体容重、堆积位置下伏基岩倾角对弃渣场坡体稳定性影响较小;指出敏感性分析亦有其局限性,采用概率分析理论研究弃渣场滑坡影响因素将是今后的主要研究方向。     

Cadmium removal from wastewater by sponge iron sphere prepared by hydrogen reduction

A new type of sponge iron sphere (NSIS) with 1-5 mm diameter, made of concentrated iron powder and possessed high activity and intension, was prepared by mini-pellet sintering integrated with H₂ direct reduction. Static state experiment has been carried on to investigate the Cd²⁺ removal efficiency from wastewater by the NSIS and to explore the Cd²⁺ removal reaction kinetics. It was suggested that initial pH value and Cd²⁺ original concentration had significant influence on Cd²⁺ removal percentage. Cd²⁺ removal percentage decreased significantly with the increasing of Cd²⁺original concentration whether the original pH value be adjusted to 3.0 or without adjustment. The results showed that the Cd²⁺ removal process followed the first order reaction because the reaction order was from 0.803 to 0.996. The apparent reaction rate constant between Cd²⁺ and NSIS was from 0.0025 to 0.1000 (mg·L^?1)^1-n·min^?1. Compared with SIS reduced by charcoal reduction, NSIS deoxided by hydrogen possessed higher activity, and could remove the same quantity of Cd²⁺ within a shorter period of time.     

Efficient dechlorination of chlorinated solvent pollutants under UV irradiation by using the synthesized TiO2 nano-sheets in aqueous phase

Titanium dioxide(TiO2), which is the widely used photo-catalyst, has been synthesized by simple hydrothermal solution containing tetrabutyl titanate and hydrofluoric acid. The synthesized product has been applied to photo-degradation in aqueous phase of chlorinated solvents, namely tetrachloroethene(PCE), trichloroethene(TCE) and 1,1,1-trichloroethane(TCA). The photo-degradation results revealed that the degradation of these harmful chemicals was better in UV/synthesized TiO2 system compared to UV/commercial P25 system and UV only system. The photo-catalytic efficiency of the synthesized TiO2 was 1.4, 1.8 and 3.0 folds higher compared to the commercial P25 for TCA, TCE and PCE degradation, respectively. Moreover, using nitrobenzene(NB) as a probe of hydroxyl radical(.OH), the degradation rate was better over UV/synthesized TiO2, suggesting the high concentration of.OH generated in UV/synthesized TiO2system. In addition,.OH concentration was confirmed by the strong peak displayed in EPR analysis over UV/synthesized TiO2system. The characterization result using XRD and TEM showed that the synthesized TiO2 was in anatase form and consisted of well-defined sheet-shaped structures having a rectangular outline with a thickness of 4 nm, side length of 50 nm and width of 33 nm and a surface 90.3 m2/g. XPS analysis revealed that ≡Ti-F bond was formed on the surface of the synthesized TiO2. The above results on both photocatalytic activity and the surface analysis demonstrated the good applicability of the synthesized TiO2 nano-sheets for the remediation of chlorinated solvent contaminated groundwater.     

胞外聚合物磷酸盐形态对生物除磷过程的影响研究

以不同DO条件下污泥龄(SRT)分别为10 d和30 d的两组实验室A/O-SBR反应器活性污泥为研究对象,探讨了胞外聚合物(EPS)磷酸盐形态对生物除磷过程的影响.结果表明,污泥絮体中的磷主要分布于EPS中,PO3-4-P和聚磷酸盐(Poly-P,包括低分子量聚磷酸盐LMW PolyP和高分子量聚磷酸盐HMW Poly-P)是EPS磷的主要形态;EPS对生物除磷的影响明显大于细菌细胞,EPS磷的厌氧降低量和好氧升高量为胞内磷变化量的2.8~6.4倍.EPS中的LMW Poly-P和HMW Poly-P含量均表现厌氧降低和好氧升高的变化规律;对于相同SRT的污泥,中DO(2.5~3.5 mg·L-1)条件较低DO(0.7~1.0 mg·L-1)条件下EPS的LMW Poly-P和HMW Poly-P有更大的厌氧降低量和好氧升高量,对应着更明显的生物除磷过程,说明EPS不仅是生物除磷过程的中转站,而且参与了生物聚磷过程.     

2011年10月珠江三角洲一次区域性空气污染过程特征分析

2011年10月18—25日珠江三角洲地区出现了一次区域性空气污染过程,重污染区域集中在西部,后期向中部转移,PM₁₀为首要污染物.针对本次空气污染过程的研究发现,此次珠江三角洲地区空气污染过程主要受大尺度冷高压活动的影响,一直为下沉气流所控制,500 m以下近地层风速很小,边界层高度较低,存在贴地逆温层,非常不利于污染物的输送和扩散.PM₁₀浓度与风速、能见度呈显著的负相关关系,与温度相关性不显著;且与风速和温度的相关性存在滞后性.稳定天气形势、大范围下沉气流、近地层静小风和贴地逆温是导致这次区域性空气污染过程的气象原因,PM₁₀浓度增加导致珠江三角洲能见度下降.     

上海一次典型雾霾过程中不同天气现象的气溶胶光学特性及转化机制

以上海市2013年冬季一次持续雾霾过程为例,根据能见度和相对湿度的地面观测资料将雾霾过程划分为干霾、湿霾、雾3种不同天气现象,对不同天气现象的气溶胶光学特性垂直分布特征进行了研究,并初步分析不同天气现象的转化机制.结果表明,3种不同天气现象的发生顺序为湿霾→干霾→湿霾及湿霾→雾→干霾→湿霾,相对湿度对能见度的影响最大,温度次之,再次是风速,而PM_(2.5)对能见度的影响最小.CALIPSO(Cloud Aerosol Lidar and Infrared Pathfinder Satellite Observation)探测期间,存在2~3 km明显气溶胶层,且不同天气现象的气溶胶层厚度不同(雾湿霾干霾);雾霾发生期间,1.0 km以下高度气溶胶消光能力最大;在干霾、湿霾到雾的转化过程中,球形、大粒径气溶胶增多,非球形、小粒径气溶胶减少.     

烟草行业的火灾特点及其监测方法的讨论

烟厂是火灾危险性较大的部门，加强其火灾的早期探测报警是防止火灾发生、减少火灾损失的重要方面。本文对烟厂中各主要生产环节的火灾特点作了分析，指出应针对各部分的特殊性采取适当的火灾探测方法并对现在常用的一些火灾探测技术在烟厂中的适用性作了讨论，认为现有的光束式火灾探测器较适用于内部空间较大的烟厂仓库和厂房。对安装了电视监控系统的企业，建议将其与计算机图象分析技术相结合，增加其防火监视功能。     

天然黏土材料附着纳米TiO2对 电解锰渣中锰的吸附固定

采用机械球磨法对膨润土、硅藻土、高岭土3种天然黏土材料进行预处理,通过超声法将纳米TiO_2附着于其上制得复合材料,考察了不同复合材料加入量及养护时间条件下复合材料对电解锰渣中Mn的吸附固定效果。3种天然黏土材料中,硅藻土的平均粒径最小,比表面积和总孔隙度最大,对水中Mn的吸附量也最大。黏土材料附着纳米TiO_2后对电解锰渣中Mn的吸附固定效果较单纯黏土材料有明显改善。在养护时间为12 d、硅藻土附着纳米Ti O_2复合材料加入量为10%(w)的最佳条件下,Mn的TCLP浸出量较原电解锰渣下降了83.04%。     

煤矿综采放顶煤工作面高浓度粉尘的综合防治

煤矿综采放顶煤工作面开采强度大、产尘尘源多、粉尘浓度高,因而对尘毒的治理难度大。为此,提出了治理的总体思路、防治方案并在几十个煤矿综采放顶煤工作面推广,取得了很好的效果。