A model for cost-benefit analysis of construction and demolition waste management throughout the waste chain

Economic instrument is indubitably perceived as effective for encouraging or forcing contractors to conduct environmentally friendly construction practices. Previous studies in relation to this topic mainly put emphasis on economic analysis of construction and demolition (C&D) waste management from a static point of view, which failed to consider its dynamics nature by integrating all essential activities throughout the waste chain. This paper is thus intended to highlight the dynamics and interrelationships of C&D waste management practices and analyze the cost-benefit of this process using a system dynamics approach. Data related to concrete and aggregate of a construction project in Shenzhen was collected for the application of the proposed model. The findings reveal that net benefits from conducting C&D waste management will occur, but a higher landfill charge will lead to a higher net benefit, as well as an earlier realization of the net benefit. In addition, the general public under a higher landfill charge will suffer from a higher environmental cost caused by illegal dumping. The simulation results also suggest that current regulation in Shenzhen should be promoted to facilitate a dramatic increase in net benefit from the implementation of C&D waste management. This research is of value in facilitating better understanding on the dynamics of C&D waste management activities throughout the waste chain, as well as providing a tool for simulating the cost-benefit of C&D waste management practices over the project duration.     

Reducing surface water pollution through the assessment of the cost-effectiveness of BMPs at different spatial scales

Two kinds of agricultural Best Management Practices (BMPs) were examined with respect to cost-effectiveness (CE) in reducing sediment, nitrates-nitrogen (NO₃–N) and total phosphorus (TP) losses to surface waters of the Arachtos catchment in Western Greece. The establishment of filter strips at the edge of fields and a non-structural measure, namely fertilization reduction in alfalfa, combined with contour farming and zero-tillage in corn and reduction of animal numbers in pastureland, were evaluated. The Soil and Water Assessment Tool (SWAT) model was used as the non-point-source (NPS) estimator, while a simple economic component was developed estimating BMP implementation cost as the mean annual expenses needed to undertake and operate the practice for a 5-year period. After each BMP implementation, the ratio of their CE in reducing pollution was calculated for each Hydrologic Response Unit (HRU) separately, for each agricultural land use type entirely and for the whole catchment. The results at the HRU scale are presented comprehensively on a map, demonstrating the spatial differentiation of CE ratios across the catchment that enhances the identification of locations where each BMP is most advisable for implementation. Based on the analysis, a catchment management solution of affordable total cost would include the expensive measure of filter strips in corn and only in a small number of pastureland fields, in combination with the profitable measure of reducing fertilization to alfalfa fields. When examined for its impact on river loads at the outlet, the latter measure led to a 20 tn or 8% annual decrease of TP from the baseline with savings of 15€/kg of pollutant reduction. Filter strips in corn fields reduced annual sediments by 66 Ktn or 5%, NO₃–N by 71 tn or 9.5% and TP by 27 tn or 10%, with an additional cost of 3.1 €/tn, 3.3 €/kg and 8.1 €/kg of each pollutant respectively. The study concludes that considerable reductions of several pollutant types at the same time can be achieved, even at low total cost, by combining targeted BMP implementation strategies only in small parts of the catchment, also enabling policy makers to take local socio-economic constraints into consideration. The methodology and the results presented aim to facilitate decision making for a cost-effective management of diffuse pollution by enabling modelers and researchers to make rapid and reliable BMP cost estimations and thus being able to calculate their CE at the local level in order to identify the most suitable areas for their implementation.     

Characterisation of workers' exposure in a Russian nickel refinery

In support of a feasibility study of reproductive and developmental health among females employed in the Monchegorsk (Russia) nickel refinery, personal exposure and biological monitoring assessments were conducted. The inhalable aerosol fraction was measured and characterised by chemical speciation and particle-size distribution measurements. Unexpected findings were that: (i), pyrometallurgical working environments had significant levels of water-soluble nickel; (ii), significant exposure to cobalt occurred for the nickel workers; (iii), particles of size corresponding to the thoracic and respirable fractions appeared to be virtually absent in most of the areas surveyed. The water-soluble fraction is judged to be primarily responsible for the observed urinary nickel and cobalt concentrations. It is concluded relative to current international occupational-exposure limits for nickel in air, and because of the high nickel concentrations observed in urine, that the Monchegorsk nickel workers are heavily exposed. The implication of this finding for follow-up epidemiological work is alluded to.     

Feasibility study prior to the certification of trace elements in urban and industrial wastewater reference materials

Reliable results for the determination of trace elements in urban and industrial wastewaters are of paramount importance for both checking the performance of sewage treatment and for detecting possible urban or industrial contamination sources. The quality control of measurements should in principle rely on external tools such as certified reference materials (CRM), which should represent, as closely as possible, the matrix of samples currently analysed, e.g., in the frame of environmental monitoring. To date, however, no CRM representatives of wastewater composition are available, which limits the possibility for control laboratories to check their QC externally. To fill this gap, the European Commission's Standards, Measurements and Testing Programme (formerly BCR) has started a European collaborative project of which the aim is to test the feasibility of preparation of wastewater reference materials and the analytical state-of-the-art to enable the certification of trace elements in such matrices. This paper presents the results of the first phase of this project, namely the feasibility study and the results of an interlaboratory trial.     

A field test for the assessment of faecal contamination of potable water

A simple, sensitive, rapid, inexpensive paper strip impregnated with Salmonellal E. coli medium (SEM) was formulated, and placed in a test tube. When potable water of 10 ml was added to the test tube it detected the faecal contamination of water samples within 16-48 h when incubated at room temperature from 20 to 35 degrees C. The positive results were indicated when the medium turned black (hydrogen sulfide production) for the presence of Salmonella sp. and/or the formation of a red ring (free indole from tryptophan) when a few drops of Kovac's reagent was added for the presence of coliform bacteria (E. coli). More than 600 water samples were tested with the new test (SEM) and results showed 99% agreement with that of the standard most probable number (MPN) coliform test and also proved highly successful in the field when it was employed to detect both Salmonella and E. coli. Different water testing laboratories involved in a water quality monitoring programme and governmental agencies evaluated the test media and reported that the test was user friendly, reliable and simple to perform in the field and will be especially useful for screening of both urban and rural water supplies for routine monitoring of bacteriological contamination.     

Changes in persistent contaminant concentration and CYP1A1 protein expression in biopsy samples from northern bottlenose whales, Hyperoodon ampullatus, following the onset of nearby oil and gas development

A small population of endangered northern bottlenose whales (Hyperoodon ampullatus) inhabits "The Gully" a Marine Protected Area on the Scotian Shelf, eastern Canada. Amid concerns regarding nearby oil and gas development, we took 36 skin and blubber biopsy samples in 1996-1997 (prior to major development) and 2002-2003 (five years after development began), and three samples from a population in the Davis Strait, Labrador in 2003. These were analysed for cytochrome P4501A1 (CYP1A1) protein expression (n=36), and for persistent contaminants (n=23). CYP1A1 showed generally low expression in whales from The Gully, but higher levels during 2003, potentially coincident with recorded oil spills, and higher levels in Davis Strait whales. A range of PCB congeners and organochlorine compounds were detected, with concentrations similar to other North Atlantic odontocetes. Concentrations were higher in whales from The Gully than from the Davis Strait, with significant increases in 4,4'-DDE and trans-nonachlor in 2002-2003 relative to 1996-1997.     

Respiratory health of road-side vendors in a large industrialized city

GOAL, SCOPE AND BACKGROUND: The literature reports a high prevalence of respiratory symptoms associated with exposure to motor vehicle exhaust emissions and people exposed to vehicle emissions are at risk of reduced lung function and cardiovascular performance. Although the effect of traffic emissions is a known risk to respiratory health, retailers are often situated along major roads in a busy urban environment to maximise customers. Shop assistants in an air-conditioned environment should be less exposed to traffic fumes and their lung function should be better preserved compared to 'unprotected' vendors exposed directly to vehicle emissions. The lung function of these two groups of workers has not previously been compared. The aims of this study are to determine if there is a difference in the concentration of respirable particles of diameter less than 10 micrometers (PM10) inside and outside air-conditioned shops along a busy major road; and to compare the lung function parameters, blood lead levels and respiratory symptoms between road-side vendors directly 'exposed' to traffic fumes and vendors working in 'protected' air-conditioned shops along the same road. METHODS: Roadside vendors (n=33) and adjacent shop assistants (n=31) were recruited for the study in a district known to have high emissions and pollution measures. All subjects were asked to complete a questionnaire providing the frequency of their respiratory symptoms. Spirometry pulmonary function tests were conducted and exhaled carbon monoxide levels (ECO), oxygen saturation and blood lead levels (BLL) were measured. PM10 level was concurrently measured in the subject's working environment. Pulmonary function data and ECO levels collected from a cohort of university staff aged > or = 30 years (n=92) at a university campus were included for comparison. RESULTS: The concentration of particulate matter (PM10) at the roadside (210 +/- 70 microg/m3) was significantly higher than inside the shops (130 +/- 40 microg/m3). There was no difference in lung function parameters or BLL between the groups, however the forced vital capacity of both groups of vendors was significantly lower than a 'control' cohort of academic institution personnel (n=92). DISCUSSION: This study illustrated that while the level of pollution improved with air conditioning, this may not be sufficient to prevent respiratory consequences. Our data suggests that a reduction in occupational exposure is not enough to protect these workers. CONCLUSIONS: Air-conditioned work environment is insufficient to protect the respiratory system against the adverse effects of exposure to vehicle emissions. RECOMMENDATIONS: The overwhelming effect of exposure during travel to and from work and at home cannot be underestimated. More stringent guidelines to control pollution appear necessary to protect the respiratory health of both shop-keepers and road-side vendors and further studies to explore the effect on respiratory health of the exposure to pollutants associated with commuting to and from work are warranted.     

Relationship between atmospheric pollution processes and synoptic pressure patterns in northern China

The air pollution index (API) sequences in 10 cities in northern China and the synoptic pressure patterns during autumn and winter from 2002 to 2006 were analyzed with diagnostic and statistical methods. The results showed that the air qualities in northern China had a prominent correlation with the pressure systems. It revealed that (a) the increasing phase of API was associated with high pressure and the successive low pressure, (b) the preceding part of front (i.e. the retral part of low pressure) was associated with the maximum of API values during a cycle of air pollution process, (c) the pressure systems with high gradient led to the decrease of API, and (d) the synoptic pressure patterns and their evolvements were the main causes of regional air pollution processes. These relations can be used to analyze the variation characteristics and mechanism of regional atmosphere pollution process, and provide important basis for the qualitative prediction, control, and management of regional air pollution problems.     

Feasibility of phytoextraction to remediate cadmium and zinc contaminated soils

A Cd and Zn contaminated soil was mixed and equilibrated with an uncontaminated, but otherwise similar soil to establish a gradient in soil contamination levels. Growth of Thlaspi caerulescens (Ganges ecotype) significantly decreased the metal concentrations in soil solution. Plant uptake of Cd and Zn exceeded the decrease of the soluble metal concentrations by several orders of magnitude. Hence, desorption of metals must have occurred to maintain the soil solution concentrations. A coupled regression model was developed to describe the transfer of metals from soil to solution and plant shoots. This model was applied to estimate the phytoextraction duration required to decrease the soil Cd concentration from 10 to 0.5 mg kg⁻¹. A biomass production of 1 and 5 t dm ha⁻¹ yr⁻¹ yields a duration of 42 and 11 yr, respectively. Successful phytoextraction operations based on T. caerulescens require an increased biomass production.