印染RO浓水深度处理及回用

采用Fenton-石灰苏打法耦合工艺对某印染厂印染反渗透(RO)浓水进行深度处理。通过实验研究了不同H2O2和Fe2+投加量、pH和反应时间对废水COD去除率的影响,以及不同石灰和碳酸钠投加量对废水硬度的脱除效果,出水回用于染色工段进行染色实验。结果表明,在pH=3.0,Fe2+投加量为1.5 mmol/L,H2O2投加量为3.75 mmol/L,反应时间为45 min,石灰和碳酸钠投加量分别为450 mg/L和1 000 mg/L的条件下,出水COD和硬度的去除率可分别达到73.9%和85.0%,耦合工艺出水水质符合该厂回用染色水标准,且减少了盐的使用,可实现印染RO浓水回用。     

Air assimilative capacity-based environment friendly siting of new industries--a case study of Kochi region, India

Air pollution has become a matter of grave concern, particularly in mega-cities and urban areas, where the situation is alarming and becoming more and more severe day-by-day and warrants, therefore, careful planning to facilitate future industrial development. Site selection, with the objective of minimizing adverse environmental impacts based on environmental criteria is a vital prerequisite, particularly for air polluting industries. In order to locate any air polluting industry, the assimilative capacity of the region needs to be assessed carefully and planned accordingly, so that the receiving environment is not adversely affected. Assimilative capacity of a region/airshed, widely represented through the ventilation coefficient by many researchers in the past, does not give a clear picture about the amount of emission load that can be assimilated in a given region. The ventilation coefficient, at best, can only present a broad picture about the air pollution dispersion potential (low, medium or high) of the region. A modified approach, which utilizes air quality modelling as a tool to estimate the maximum allowable emission load that a region can assimilate without violating the stipulated standards, has been used for estimating the assimilative capacity of the air environment. Details of this approach have been presented in this paper through a case study carried out for the Kochi region, located in the Kerala State of India. A variety of emission and meteorological scenarios have been considered and critical emission loads have been estimated. This approach shall provide necessary technical guidance to the environmental regulatory authorities as well as to the industries in planning environment friendly industrial development.     

Metal fractionation study on bed sediments of Hussainsagar Lake, Hyderabad, India

Hussainsagar Lake in the heart of Hyderabad City (India) receives toxic substances through five streams draining from a catchment area of 245 km². Of particular interest are heavy metals received from urban runoff as well as municipal sewage and industrial effluents. Heavy metals entering the lake get adsorbed onto the suspended sediments, which eventually settle down in the bottom of the lake. In this study, fractionation of metal ions has been studied on the bed sediments of Hussainsagar Lake in order to determine the ecotoxic potential of metal ions. Comparison of sediments with average shale values indicated anthropogenic enrichment with copper, nickel, lead, cadmium, and zinc. The risk assessment code as applied to the present study reveals that 10–17% of manganese, 10–18% of nickel, 14–24% of chromium, 10–19% of lead, 21–30% of cadmium, and 18–28% of zinc exist in exchangeable fraction and, therefore, comes under medium risk category and may enter into food chain. The association of these metals with the exchangeable fraction may cause deleterious effects to aquatic life. The present database will help in formulating guidelines for carrying out dredging operations under restoration programs in the Hussainsagar Lake.     

Risk management: Time for innovative approaches

Risk management practices under the current environmental regulations is a long, complex process that considers scientific, technologic, and management factors to develop various regulatory standards and pollution control measures. Using the mandatory enforcement approach, sometimes referred to as “command-and-control”, a set of preliminary environmental goals, such as better air and water qualities, were achieved. However, the information-intensive nature of the risk management process and the lack of flexibility in conventional regulatory methods to changing economic and technologic realities of the decade has created interest among risk managers to examine some innovative management approaches. Above all, environmental problems of a global scale require novel management methods while striving to achieve the desired environmental goals. As the principal analytical tool in risk management, quantitative risk assessment exerts considerable influence on the risk management process. Therefore, advances in risk management are closely associated with scientific developments that enhance the risk assessment process, particularly those efforts aimed at improving human exposure and toxicity assessments. Market incentives, information dissemination, creative enforcement practices, and interagency and intergovernmental interactions were identified as the key elements of innovative environmental risk management practices. This paper will present an overview of the emerging innovative risk management approaches.     

甲苯降解菌的分离、鉴定及其对甲苯的降解特性

从重庆钢铁集团焦化厂脱酚池车间污泥中分离纯化得到一株能以甲苯为惟一碳源和能源的革兰氏阴性菌。根据生理生化实验结果、菌落特征、菌体形态,初步鉴定为假单孢菌属。菌株的最佳生长条件为：pH7、温度35℃、加入量100mL培养基中加入60μL甲苯、接种量5．0％。考察了菌株对甲苯的降解特性,在甲苯质量浓度为150mg/L时,比降解速率达到0．211h^-1。     

Multi-drug resistance,integron and transposon-mediated gene transfer in heterotrophic bacteria from Penaeus vannamei and its culture environment

Environmental Science and Pollution Research - Multi-drug resistance (MDR) in bacteria is regarded as an emerging pollutant in different food production avenues including aquaculture. One hundred...     

Selective removal of common cyanotoxins: a review

Environmental Science and Pollution Research - The development of cyanobacterial blooms can have adverse effects on water bodies and may produce cyanotoxins. Several physical and chemical methods...     

羟基磷灰石的制备及其对水中氟离子的吸附

本研究利用红外光谱(FTIR)、扫描电镜(SEM)和X射线粉末衍射(XRD)观察了共沉淀法合成羟基磷灰石(HAP)的形貌及其晶型结构,并探讨了Ca/P摩尔比、反应时间及反应温度等因素对羟基磷灰石吸附水中氟离子性能的影响。结果表明,n(Ca/P)=1.5/1、反应时间1 h、反应温度40℃、陈化时间48 h、煅烧温度200℃、煅烧时间2 h时,HAP除氟效果最佳,吸附效率和吸附容量分别达到68.8%和6.88 mg/g。实验数据Langmuir 等温模式拟合效果优于Freundlich模式,热力学参数计算可知,HAP对氟离子的吸附是自发 (ΔG0吸热 (ΔH0>0),熵增 (ΔS0 >0)的过程。HAP对氟离子的吸附符合拟二级反应动力学过程。