Halopriming imparts tolerance to salt and PEG induced drought stress in sugarcane

Sugarcane, a glycophyte grown in the tropical and subtropical regions, is frequently subjected to soil salinity, affecting the yield and quality of the harvest. The ameliorative efficiency of salt priming on emergence and plantlet growth was examined in sugarcane cultivars which are known to vary in salt tolerance under field conditions. Salt priming with NaCl (100 mM) improved both the percent and rate of germination of the sets of the tolerant (Co 62175) and moderately tolerant (CoM 265) varieties compared to sensitive (CoC 671) and test variety (Co 86032). Salt priming during germination also improved the growth performance of two-month-old sugarcane plants in terms of shoot length, shoot and root fresh weight when subjected to 15 day iso-osmotic (−0.7 MPa) NaCl (150 mM) or polyethylene glycol (PEG 8000; 20%, w/v) stress. The primed plants exhibited lower salt- and dehydration-induced leaf senescence. The results suggest salt priming as an efficient approach for imparting abiotic stress tolerance in sugarcane.     

Assisted phytostabilization of Pb-spiked soils amended with charcoal and banana compost and vegetated with Ricinus communis L. (Castor bean)

Environmental Geochemistry and Health - A greenhouse experiment was performed to elucidate the potency of Prosopis juliflora charcoal (PJC) and banana waste compost (BWC) to improve soil fertility...     

Development of a modular vapor intrusion model with variably saturated and non-isothermal vadose zone

Environmental Geochemistry and Health - Human health risk assessment at hydrocarbon-contaminated sites requires a critical evaluation of the exposure pathways of volatile organic compounds...     

Assessment of urban air pollution and it's probable health impact

The present study deals with the quantitative effect of vehicular emission on ambient air quality during May 2006 in urban area of Lucknow city. In this study SPM, RSPM, SO2, NOx and 7 trace metals associated with RSPM were estimated at 10 representative locations in urban area and one village area for control. Beside this, air quality index (AQI), health effects of different metals and mortality were assessed. The 24 hr average concentration of SPM, RSPM, SO2 and NOx was found to be 382.3, 171.5, 24.3 and 33.8 microg m(-3) respectively in urban area and these concentrations were found to be significantly (p < 0.01) higher by 94.8, 134.8, 107.4 and 129.6% than control site respectively The 24 hr mean of SPM and RSPM at each location of urban area were found to be higher than prescribed limit of National Ambient Air Quality Standard (NAAQS) except SPM for industrial area. The 24 hr mean concentration of metals associated with RSPM was found to be higher than the control site by 52.3, 271.8, 408.9, 75.81, 62.7, 487.54 and 189.5% for Fe, Cu, Pb, Zn, Ni, Mn and Cr respectively. The inter correlation of metals Pb with Mn, Fe and Cr; Zn with Ni and Cr; Ni with Cr; Mn with Fe and Cu with Cr showed significant positive relation either at p < 0.05 or p < 0.01 level. Metals Pb, Mn and Cr (p < 0.01) and Cu (p < 0.05) showed significant positive correlation with RSPM. These results indicate that ambient air quality in the urban area is affected adversely due to emission and accumulation of SPM, RSPM, SO2, NOx and trace metals. These pollutants may pose detrimental effect on human health, as exposure of these are associated with cardiovascular and respiratory diseases, neurological impairments, increased risk of preterm birth and even mortality and morbidity.     

Metals concentration associated with respirable particulate matter (PM10) in industrial area of Eastern U.P. India

The present study deals with the assessment of ambient air quality with respect to respirable suspended particulate matter (RSPM or PM10 < or = 10 microm) and trace metals (Fe, Zn, Cu, Cr Ni, Cd, Mn and Pb) concentrations in RSPM at five locations of Renukoot, an industrial area of Eastern Uttar Pradesh. The 24 hr mean concentrations of PM10 ranged between 69.3 to 118.9 microg m(-3), which is well within the permissible limit (150 microg m(-3)) of national ambient air quality standards (NAAQS) but found higher than the prescribed annual daily limit of US EPA (50 microg m(-3)). The ambient air was mostly dominated by the Fe and least by the Cd among the metal analysed. Murdhawa, a commercial place influenced by vehicular population, is found to be the most polluted area of Renukoot and Dongia nalla (forest area) the least. The ambient air of Murdhawa is rich in Cu and Ni, indicating contribution of mobile sources. The Rammandir a residential place near the industry, is rich in Cd and Cr suggesting contribution of point sources. The Ni concentration is found to be alarmingly high in the air at all the locations except Dongia nallah, when compared with the EC (European Commission) limit (20 ng m(-3)). The Cd concentration is found to be higher only at Rammandir as compared with the EC limit (5 ng m(-3)). Mean concentrations of Zn, Pb and Mn are found to be almost equal in the ambient air of all the locations, suggesting the significance of sources contributing to presence of these metals. Zn, Cu, Pb and Ni having a significant correlation with PM10 indicate the same source contributing these metals as well as PM10. The present study has focused on the quantitative variation in different metals in the PM10, which is extremely harmful due to their toxic and carcinogenic nature.     

Sorption and bioavailability of arsenic in selected Bangladesh soils

The bioavailability of arsenic (As) in the soil environment is largely governed by its adsorption–desorption reactions with soil constituents. We have investigated the sorption–desorption behaviour of As in four typical Bangladeshi soils subjected to irrigation with As-contaminated groundwater. The total As content of soils (160 samples) from the Laksham district ranged from <0.03 to approximately 43 mg kg⁻¹. Despite the low total soil As content, the concentration of As in the pore water of soils freshly irrigated with As-contaminated groundwater ranged from 0.01 to 0.1 mg l⁻¹. However, when these soils were allowed to dry, the concentration of As released in the pore water decreased to undetectable levels. Remoistening of soils to field moisture over a 10-day period resulted in a significant (up to 0.06 mg l⁻¹) release of As in the pore water of soils containing >10 mg As kg⁻¹ soil, indicating the potential availability of As. In soils containing <5 mg As kg⁻¹, As was not detected in the pore water. A comparison of Bangladeshi soils with strongly weathered long-term As-contaminated soils from Queensland, Australia showed a much greater release of As in water extracts from the Australian soils. However, this was attributed to the much higher loading of As in these Australian soils. The correlation of pore water As with other inorganic ions (P, S) showed a strongly significant (P < 0.001) relationship with P, although there was no significant relationship between As and other inorganic cations, such as Fe and Mn. Batch sorption studies showed an appreciable capacity for both As^V and As^III sorption, with As^V being retained in much greater concentrations than As^III.     

Bioremediation approaches for organic pollutants: a critical perspective

Due to human activities to a greater extent and natural processes to some extent, a large number of organic chemical substances such as petroleum hydrocarbons, halogenated and nitroaromatic compounds, phthalate esters, solvents and pesticides pollute the soil and aquatic environments. Remediation of these polluted sites following the conventional engineering approaches based on physicochemical methods is both technically and economically challenging. Bioremediation that involves the capabilities of microorganisms in the removal of pollutants is the most promising, relatively efficient and cost-effective technology. However, the current bioremediation approaches suffer from a number of limitations which include the poor capabilities of microbial communities in the field, lesser bioavailability of contaminants on spatial and temporal scales, and absence of bench-mark values for efficacy testing of bioremediation for their widespread application in the field. The restoration of all natural functions of some polluted soils remains impractical and, hence, the application of the principle of function-directed remediation may be sufficient to minimize the risks of persistence and spreading of pollutants. This review selectively examines and provides a critical view on the knowledge gaps and limitations in field application strategies, approaches such as composting, electrobioremediation and microbe-assisted phytoremediation, and the use of probes and assays for monitoring and testing the efficacy of bioremediation of polluted sites.     

Prenatal demonstration of a cervical myelocystocele

Myelocystocele is a rare spinal cord disorder and has not been described prenatally. We report a case in which prenatal ultrasound and magnetic resonance imaging (MRI) demonstrated a posterior cervical mass which was initially thought to be a meningocele or an atypical cystic hygroma. Surgery performed at 1 day of age showed this to be a myelocystocele. Therefore, the differential diagnosis of an extracranial cystic mass in the posterior cervical region should be expanded to include myelocystoceles.     

Removal of chromium from synthetic plating waste by zero-valent iron and sulfate-reducing bacteria.

Experiments were conducted to evaluate the potential of zero-valent iron and sulfate-reducing bacteria (SRB) for reduction and removal of chromium from synthetic electroplating waste. The zero-valent iron shows promising results as a reductant of hexavalent chromium (Cr+6) to trivalent chromium (Cr+3), capable of 100% reduction. The required iron concentration was a function of chromium concentration in the waste stream. Removal of Cr+3 by adsorption or precipitation on iron leads to complete removal of chromium from the waste and was a slower process than the reduction of Cr+6. Presence SRB in a completely mixed batch reactor inhibited the reduction of Cr+6. In a fixed-bed column reactor, SRB enhanced chromium removal and showed promising results for the treatment of wastes with low chromium concentrations. It is proposed that, for waste with high chromium concentration, zero-valent iron is an efficient reductant and can be used for reduction of Cr+6. For low chromium concentrations, a SRB augmented zero-valent iron and sand column is capable of removing chromium completely.     

Open-path tunable diode laser absorption spectroscopy for acquisition of fugitive emission flux data

Air pollutant emission from unconfined sources is an increasingly important environmental issue. The U.S. Environmental Protection Agency (EPA) has developed a ground-based optical remote-sensing method that enables direct measurement of fugitive emission flux from large area sources. Open-path Fourier transform infrared spectroscopy (OP-FTIR) has been the primary technique for acquisition of pollutant concentration data used in this emission measurement method. For a number of environmentally important compounds, such as ammonia and methane, open-path tunable diode laser absorption spectroscopy (OP-TDLAS) is shown to be a viable alternative to Fourier transform spectroscopy for pollutant concentration measurements. Near-IR diode laser spectroscopy systems offer significant operational and cost advantages over Fourier transform instruments enabling more efficient implementation of the measurement strategy. This article reviews the EPA's fugitive emission measurement method and describes its multipath tunable diode laser instrument. Validation testing of the system is discussed. OP-TDLAS versus OP-FTIR correlation testing results for ammonia (R2 = 0.980) and methane (R2 = 0.991) are reported. Two example applications of tunable diode laser-based fugitive emission measurements are presented.