Toxicity of fenamiphos and its metabolites to the cladoceran Daphnia carinata: the influence of microbial degradation in natural waters

The acute toxicity of an organophosphorous pesticide, fenamiphos and its metabolites, fenamiphos sulfoxide, fenamiphos sulfone, fenamiphos phenol, fenamiphos sulfoxide phenol and fenamiphos sulfone phenol, to a cladoceran, Daphnia carinata was studied in both cladoceran culture medium and natural water collected from a local river. The toxicity followed the order: fenamiphos>fenamiphos sulfone>fenamiphos sulfoxide. The hydrolysis products of fenamiphos, F. sulfoxide (FSO) and F. sulfone (FSO(2)) (F. phenol, FSO phenol and FSO(2) phenol) were not toxic to D. carinata up to 500microgl(-1) water, suggesting hydrolysis reaction leads to detoxification. Also the toxicity was reduced in natural water compared to the cladoceran culture medium due to microbial mediated degradation of toxicants in the natural water. Fenamiphos and its metabolites were stable in both cladoceran water and filter-sterilised natural water while these compounds showed degradation in unfiltered natural water implicating the microbial role in degradation of these compounds. To our knowledge this is the first study on acute toxicity of fenamiphos metabolites to cladoceran and this study suggests that the organophosphate pesticides are highly toxic to fresh water invertebrates and therefore pollution with these compounds may adversely affect the natural ecosystems.     

Atrazine and simazine degradation in Pennisetum rhizosphere

The ability of rhizosphere of four plant species to promote the degradation of charcoal-fixed atrazine and simazine in cement blocks of a long-term contaminated soil when mixed with a normal soil at 1:1 ratio was tested. Of the four selected plants viz., rye grass (Lolium perenne), tall fescue (Festuca arundinacae), Pennisetum (Pennisetum clandestinum) and a spring onion (Allium sp.) used in this study, only P. clandestinum was able to survive in herbicide contaminated soil while other plants died within few days after germination/transplanting. Both atrazine and simazine were degraded at a faster rate in contaminated soil planted to P. clandestinum than in unplanted soil. Within 80 days, nearly 45% and 52% of atrazine and simazine, respectively, were degraded in soil planted to P. clandestinum while only 22% and 20% of the respective herbicide were degraded in the unplanted soil. During 80-day experimental period, both microbial biomass and soil dehydrogenase activity were significantly increased (7-fold) in soil planted to P. clandestinum over that in unplanted soil. The suspension of contaminated rhizosphere soil, planted to P. clandestinum exhibited an exceptional capability to degrade both atrazine (300 microg) and simazine (50 microg) in a mineral salts medium over that of non-rhizosphere soil suspension. Results indicate that P. clandestinum, a C4 plant, may be useful for remediation of soils contaminated with atrazine and simazine.     

Size-resolved effective density of submicron particles during summertime in the rural atmosphere of Beijing, China

Particle density is an important physical property of atmospheric particles.The information on high time-resolution size-resolved particle density is essential for understanding the atmospheric physical and chemical aging processes of aerosols particles.In the present study,a centrifugal particle mass analyzer(CPMA) combined with a differential mobility analyzer(DMA) was deployed to determine the size-resolved effective density of 50 to 350 nm particles at a rural site of Beijing during summer 2016.The measured particle effective densities decreased with increasing particle sizes and ranged from 1.43 to 1.55 g/cm~3,on average.The effective particle density distributions were dominated by a mode peaked at around 1.5 g/cm~3 for 50 to350 nm particles.Extra modes with peaks at 1.0,0.8,and 0.6 g/cm3 for 150,240,and 350 nm particles,which might be freshly emitted soot particles,were observed during intensive primary emissions episodes.The particle effective densities showed a diurnal variation pattern,with higher values during daytime.A case study showed that the effective density of Aitken mode particles during the new particle formation(NPF) event decreased considerably,indicating the significant contribution of organics to new particle growth.     

Scattering cross-section emission factors for visibility and radiative transfer applications: military vehicles traveling on unpaved roads

Emission factors for particulate matter (PM) are generally reported as mass emission factors (PM mass emitted per time or activity) as appropriate for air quality standards based on mass concentration. However, for visibility and radiative transfer applications, scattering, absorption, and extinction coefficients are the parameters of interest, with visibility standards based on extinction coefficients. These coefficients (dimension of inverse distance) equal cross-section concentrations, and, therefore, cross-section emission factors are appropriate. Scattering cross-section emission factors were determined for dust entrainment by nine vehicles, ranging from light passenger vehicles to heavy military vehicles, traveling on an unpaved road. Each vehicle made multiple passes at multiple speeds while scattering and absorption coefficients, wind velocity and dust plume profiles, and additional parameters were measured downwind of the road. Light absorption of the entrained PM was negligible, and the light extinction was primarily caused by scattering. The resulting scattering cross-section emission factors per vehicle kilometer traveled (vkt) range from 12.5 m2/vkt for a slow (16 km/ hr), light (1176 kg) vehicle to 3724 m2/vkt for a fast (64 km/hr), heavy (17,727 kg) vehicle and generally increase with vehicle speed and mass. The increase is approximately linear with speed, yielding emission factors per vkt and speed ranging from 4.2 m2/(vkt km/hr) to 53 m2/(vkt km/hr). These emission factors depend approximately linearly on vehicle mass within the groups of light (vehicle mass < or =3100 kg) and heavy (vehicle mass >8000 kg) vehicles yielding emission factors per vkt, speed, and mass of 0.0056 m2/(vkt km/hr kg) and 0.0024 m2/(vkt km/hr kg), respectively. Comparison of the scattering cross-section and PM mass emission factors yields average mass scattering efficiencies of 1.5 m2/g for the light vehicles and of 0.8 m2/g for the heavy vehicles indicating that the heavy vehicles entrain larger particles than the light vehicles.     

Spatial distribution of fossil fuel derived CO2 over India using radiocarbon measurements in crop plants

Examining the contribution of fossil fuel CO₂to the total CO₂changes in the atmosphere is of primary concern due to its alarming levels of fossil fuel emissions over the globe,specifi cally developing countries.Atmospheric radiocarbon represents an important observationa constraint and utilized to trace fossil fuel derived CO₂(CO_2ff) in the atmosphere.For the firs time,we have presented a detailed analysis on the spatial distribution of fossil fuel der...     

Towards environmentally sustainable industrialization: a case study of some mini iron and steel industries in India

Summary Iron and steel have been used in India since ancient times (possibly as early as 5000 BC). There are several references to the use of iron and steel in the Vedic literatures. The rust and corrosionfree iron pillar of Qutub Minar in Delhi, built 1500 years ago and the steel girders used in the temples of Orissa around AD 700–1200 still bear the testimony of these early industries. Steels are in great demand today but the large steel plants provide a limited range of steel mostly consumed in building and construction activities. In India, heavy machine tools, locomotives, automobiles, aviation, ship building and engineering tools require super grade steels with various specifications and these are met by mini iron and steel industrial plants. There are approximately 160 such plants mostly situated in big cities and towns. There are several economic and ecological advantages of these mini steel plants. They mostly use iron and steel scrap and other kinds of iron wastes from large industries as their raw material, contrary to the large plants which use iron ores as primary raw materials, the extraction processing and utilization of which involves severe environmental damage by way of deforestation and air and water pollution. Mini steel plants consume much less water and energy. The government of India has given a number of incentives to the mini steel industries by way of exemption from income tax, custom and excise duties, depreciation and investment allowances and rebates on charges for consumption of water and electricity.Dr Rajiv K. Sinha is an assistant professor in human ecology at the University of Rajasthan. Mr V.N. Bhargava is an engineer employed at the Research and Development Division of National Engineering Industries, Khatipura Road, Jaipur 302006, India.     

Effects of adsorbent dose and size on phosphate-removal from wastewaters

Laboratory scale production of rinsed tamarind nutshell activated carbon (TNSAC) was done by the method of single stage chemical activation, with zinc chloride as an activation agent. Using this adsorbent, adsorption studies were conducted in agitated batch flow reactors with a fixed initial phosphate concentration and with varying adsorbent particle sizes and doses, The highest percentages adsorbed, for an adsorbent dose of 4 g litre(-1), were 57% and 44%, respectively, for adsorbent particle sizes of 106.1 microm and 232.4 microm. Two different models have been developed for predicting the percentage of phosphates adsorbed. Both models manifested high coefficients of correlation, indicating their robustness. The adsorption isotherms developed were observed to resemble the form of Freundlich isotherms. A generalized model has been developed for predicting the adsorptive capacity with respect to the stated test conditions. This model exhibited good coefficients of correlation.     

Improving the dynamic response of frequency and power in a wind integrated power system by optimal design of compensated superconducting magnetic energy storage

The frequency deviation and power fluctuation need to be controlled in a wind-integrated power system (WIPS) for keeping the balance between system power generation and demand, which support the quality and stability of overall power system. The present paper addresses this problem while concerning the integration of intermittent wind power and load disturbance into the WIPS. With this intent, it proposes the compensated superconducting magnetic energy storage (CSMES) system with proportional integral derivative (PID) controller for improving the frequency and power deviation profile. A novel swarm intelligence-based artificial bee colony (ABC) algorithm is used for optimal design of PID-CSMES system. Robustness of the proposed ABC-based PID-CSMES control strategy is tested in WIPS under various disturbance patterns of load and wind power. To demonstrate the improved dynamic response, their simulation results are compared with particle swarm optimization-based PID-CSMES, PID with SMES, and only PID controller technique. The performance indices and transient response characteristics of frequency and power deviation are used to evaluate and compare the accuracy and efficiency of each controller. Stability of various system configurations is analyzed using eigenvalue location. Comparing the results of different controller in WIPS indicates a substantial improvement in the dynamic response of system frequency and power deviations by utilizing the proposed control strategy.