A rapid and sensitive analytical method for the quantification of residues of endosulfan in blood

A new sensitive analytical procedure has been developed for the determination of residues of endosulfan in human blood samples. The method involves the extraction of residues of endosulfan from blood samples by the addition of 60% sulfuric acid at 10 degrees C, liquid/liquid partitioning by using hexane and acetone mixture (9:1) and quantification by using GC-ECD. Residues of endosulfan in blood samples were quantified as the sum of alpha-endosulfan, beta-endosulfan, endosulfan sulfate and endosulfandiol. The influence of temperature during the extraction has been studied. Recovery experiments were conducted over the concentration range 1.0-50 ng ml(-1) and the relative standard deviation calculated. The method was found to be sufficiently sensitive to quantify the residue of total endosulfan up to the 1.0 ng ml(-1) level. The recovery was 92% with a calculated relative standard deviation of 1.96%. Conversion of endosulfan to endosulfandiol is found to be less than 0.5% under the defined conditions. The method was applied to the analysis of residue contents of endosulfan and its metabolites in blood samples collected from the exposed population. The data obtained has been confirmed by GC-MS-EI in selective ion monitoring (SIM) mode.     

Selenium status in soils of northern districts of India

The HG-AAS technique was used to estimate the soil selenium status of the agricultural lands of northern parts of India. The drier lands where lesser rains were received or where less irrigation water was available in Rajasthan and southern parts of the Haryana states had above normal soil selenium levels. These soils were also found to be alkaline. Punjab, Himachal Pradesh and northern parts of the Haryana states had normal levels of selenium in their soils, except with slightly lower selenium levels in a few areas that were affected by floods along the river Yamuna. The results were also confirmed using the ICP-OES technique.     

Stress in the workplace: a comparison of gender and occupations

Stressful incidents at work were examined using an open‐ended technique for three different occupations: clerical workers, university professors and sales associates. The study revealed both similarities and differences in stressors and coping techniques reported across occupations. Interpersonal conflict, work overload and time wasters were common across all occupations. Lack of control and work overload were reported as major stressors by the clerical group and interpersonal conflict as a major stressor by the academic and sales groups. Gender differences were also found. Copyright © 1999 John Wiley & Sons, Ltd.     

Influence of crumb rubber on the geotechnical properties of clayey soil

The environmentally friendly and safe disposal of waste discarded rubber tyres are becoming a matter of serious concern across the globe because of its detrimental effect on health, environment and ecological systems. The paper aims at assessing the impact of waste rubber tyre inclusion on the geotechnical properties of clayey soil. Discarded rubber in the form of crumb rubber of size ranging between 0.8 and 2 mm varying from 0 to 10% was used in this investigation. Several tests, namely compaction, unconfined compressive strength, split tensile strength, California bearing ratio, consolidation and swelling pressure, along with microstructural studies have been carried out on different combinations of clayey soil and crumb rubber. The results of the study demonstrate that the inclusion of crumb rubber reduces the maximum dry unit weight and optimum moisture content of the clay. The addition of crumb rubber up to 5% in the clay causes an insignificant increase in the unconfined compressive strength and split tensile strength. Compared with the clayey soil, the inclusion of crumb rubber up to 5% improves the California bearing ratio of the clayey soil in unsoaked condition. It has also noticed that addition of crumb rubber helps in reducing the compression index and swelling pressure of the clayey soil.     

Treatment of Arctic wastewater by chemical coagulation,UV and peracetic acid disinfection

Conventional wastewater treatment is challenging in the Arctic region due to the cold climate and scattered population. Thus, no wastewater treatment plant exists in Greenland, and raw wastewater is discharged directly to nearby waterbodies without treatment. We investigated the efficiency of physicochemical wastewater treatment, in Kangerlussuaq, Greenland. Raw wastewater from Kangerlussuaq was treated by chemical coagulation and UV disinfection. By applying 7.5 mg Al/L polyaluminium chloride (PAX XL100), 73% of turbidity and 28% phosphate was removed from raw wastewater. E. coli and Enterococcus were removed by 4 and 2.5 log, respectively, when UV irradiation of 0.70 kWh/m³ was applied to coagulated wastewater. Furthermore, coagulated raw wastewater in Denmark, which has a chemical quality similar to Greenlandic wastewater, was disinfected by peracetic acid or UV irradiation. Removal of heterotrophic bacteria by applying 6 and 12 mg/L peracetic acid was 2.8 and 3.1 log, respectively. Similarly, removal of heterotrophic bacteria by applying 0.21 and 2.10 kWh/m³ for UV irradiation was 2.1 and greater than 4 log, respectively. Physicochemical treatment of raw wastewater followed by UV irradiation and/or peracetic acid disinfection showed the potential for treatment of arctic wastewater.     

Status and Environmental Impact of Emissions from Thermal Power Plants in India

The main emissions from coal combustion at thermal power plants are carbon dioxide (CO₂), nitrogen oxides, sulfur oxides, chlorofluorocarbons (CFCs), and airborne inorganic particles such as fly ash and soot; CO₂, methane, and CFCs are greenhouse gases. These emissions are considered to be partially responsible for harmful global climate change. This review summarizes the status of thermal power plants in India and their various types of emissions that directly or indirectly produce harmful effects on the environment and human health. Moreover, it focuses on various types of preventive measures used to avoid/minimize emissions.     

Nitrogen Oxides Emission Control Options for Coal-Fired Electric Utility Boilers

Abstract

Recent regulations have required reductions in emissions of nitrogen oxides (NO_x) from electric utility boilers. To comply with these regulatory requirements, it is increasingly important to implement state-of-the-art NO_x control technologies on coal-fired utility boilers. This paper reviews NO_x control options for these boilers. It discusses the established commercial primary and secondary control technologies and examines what is being done to use them more effectively. Furthermore, the paper discusses recent developments in NO_x controls. The popular primary control technologies in use in the United States are low-NO_x burners and overfire air. Data reflect that average NO_x reductions for specific primary controls have ranged from 35% to 63% from 1995 emissions levels. The secondary NO_x control technologies applied on U.S. coal-fired utility boilers include reburning, selective noncatalytic reduction (SNCR), and selective catalytic reduction (SCR). Thirty-six U.S. coal-fired utility boilers have installed SNCR, and reported NO_x reductions achieved at these applications ranged from 15% to 66%. Recently, SCR has been installed at >150 U.S. coal-fired utility boilers. Data on the performance of 20 SCR systems operating in the United States with low-NO_x emissions reflect that in 2003, these units achieved NO_x emission rates between 0.04 and 0.07 lb/10⁶ Btu.     

Investigation of Selective Catalytic Reduction Impact on Mercury Speciation under Simulated NOx Emission Control Conditions

Abstract

Selective catalytic reduction (SCR) technology increasingly is being applied for controlling emissions of nitrogen oxides (NO_x) from coal-fired boilers. Some recent field and pilot studies suggest that the operation of SCR could affect the chemical form of mercury (Hg) in coal combustion flue gases. The speciation of Hg is an important factor influencing the control and environmental fate of Hg emissions from coal combustion. The vanadium and titanium oxides, used commonly in the vanadia-titania SCR catalyst for catalytic NO_x reduction, promote the formation of oxidized mercury (Hg²⁺).

The work reported in this paper focuses on the impact of SCR on elemental mercury (Hg⁰) oxidation. Bench-scale experiments were conducted to investigate Hg⁰ oxidation in the presence of simulated coal combustion flue gases and under SCR reaction conditions. Flue gas mixtures with different concentrations of hydrogen chloride (HCl) and sulfur dioxide (SO₂) for simulating the combustion of bituminous coals and subbituminous coals were tested in these experiments. The effects of HCl and SO₂ in the flue gases on Hg⁰ oxidation under SCR reaction conditions were studied. It was observed that HCl is the most critical flue gas component that causes conversion of Hg⁰ to Hg²⁺ under SCR reaction conditions. The importance of HCl for Hg⁰ oxidation found in the present study provides the scientific basis for the apparent coal-type dependence observed for Hg⁰ oxidation occurring across the SCR reactors in the field.     

Atrazine degradation in a containerized rhizosphere system

Abstract

The effect of atrazine (2‐chloro‐4‐ethylamino‐6‐isopropylamino‐s‐triazine) on rhizosphere microorganisms and its fate in a containerized rhizosphere system was studied. The rhizosphere system consisted of corn grown in pot containing a defined potting mix of sand and bark with atrazine. Sterilized potting mix and a container without plants served as controls. Atrazine was extracted and analyzed via HPLC. Fluorescent pseudomonad populations increased 100‐fold in the rhizposphere during a 60‐day incubation period as compared to the nonvegetated control. Atrazine degradation was higher in the rhizosphere system (half‐life of 7 days) compared to the nonvegetated control (half‐life of greater than 45 days). The major degradation product detected in the rhizosphere system was deisopropylatrazine; other products detected included deethylatrazine, deethylhydroxyatrazine, deisopropylatrazine and hydroxyatrazine. Hydroxyatrazine was detected in the nonvegetated and sterile controls. The containerized rhizosphere system provides an experimental system to study the fate of pesticidal chemicals as well as the effects on microbial populations.