Comparative research on NIMBY risk acceptability between Chinese and Japanese college students

Along with the progressive acceleration of urbanization, the need to identify potentially troublesome “Not In My Back Yard” (NIMBY) facilities in the city is inevitable. To resolve NIMBY conflict, it is important to know people’s NIMBY risk acceptability for these facilities. A questionnaire survey was used among Chinese and Japanese college students to identify NIMBY risk acceptability. LISREL was used to construct a structural equation model to analyze the difference in NIMBY risk acceptability between the Chinese and Japanese college students. Factors that may affect NIMBY risk acceptability were analyzed: “perceiving utility,” “perceiving risk,” “trust in government,” “reasonable compensation,” and “procedural justice.” The findings show that Japanese students’ concerns were greater than Chinese students’ concerns. Perceiving utility and perceiving risk were the most important factors that affect people’s NIMBY risk acceptability, followed by procedural justice, trust in government, and reasonable compensation. There is a difference between the different cultural backgrounds in confronting the risk: Chinese students focus more on the reputation and value of real estate, while Japanese students pay more attention to environmental pollution and damage to health. Furthermore, cultural influences play a role in students’ risk perception. To improve the risk acceptability for NIMBY facilities and provide a basis for resolving NIMBY conflicts, it is necessary to ensure the benefits of the NIMBY facility while reducing environmental pollution. The findings of this study may be of interest for policy makers and practitioners to devise future NIMBY strategies.     

Chlorinated and brominated dibenzo-p-dioxins and dibenzofurans in surface sediment from Taihu Lake, China

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and polybrominated dibenzo-p-dioxins and dibenzofurans (PBDD/Fs) in surface sediment samples from Taihu Lake--an important water supply of the Yangtze River Delta, China--were investigated in the present study. Concentrations of PCDD/Fs ranged from 0.91 to 4.8 pg TEQ g(-1) dw (mean: 2.9 pg TEQ g(-1) dw, TEQ: Toxic Equivalent), which were all higher than the threshold effect level established by interim sediment quality guidelines in Canada (0.85 pg TEQ g(-1) dw). The levels of PBDD/Fs ranged from 0.16 to 1.6 pg TEQ g(-1) dw (mean: 0.52 pg TEQ g(-1) dw) and accounted for 5-33% (mean: 14%) of the total PCDD/Fs and PBDD/Fs TEQ. Comparatively, the abundance of sedimentary PCDD/Fs in the three regions (Meiliang Bay, Gonghu Bay, and Xukou Bay) showed a decreasing trend from the inflow region to the outflow region, while no significant difference was observed among their 2,3,7,8-PBDD/Fs levels, which suggested that the sources of PCDD/Fs and PBDD/Fs differed in this area. Principal component analysis suggested that the historical production/usage of pentachlorophenol and sodium pentachlorophenate was the dominant source of PCDD/Fs in the sediment of these regions. Although the specific sources of PBDD/Fs in the sediment of Taihu Lake were unclear, it was suspected to be due to atmospheric deposition; however, an additional study is needed to confirm this.     

Sb release characteristics of the solid waste produced in antimony mining smelting process

Sb release characteristics of blast furnace slag, mining waste rock and tailing sand were investigated in static immersion and dynamic leaching test. These three kinds of waste samples were collected from the antimony mine in Lengshuijiang, China, produced in mining smelting process. Effects of solid/liquid ratio, sample size and pH of leaching solution on Sb release characteristics were inspected based on the analysis of scanning electron microscope, pH and EC of leachate. The optimal parameters for Sb leaching of each sample were analyzed. For blast furnace slag and mining waste rock, Sb release contents increased along with the decline of solid/liquid ratio. The maximum accumulative release contents were 42.13, 34.26 mg/kg at the solid/liquid ratio of 1:20. While Sb release content for tailing sand decreased first and then increased with the reduction of solid/liquid ratio. When the solid/liquid ratio was 1:5, the accumulative Sb release content reached the most (24.30 mg/kg). Sb release content of mining waste rock increased with the drop of leaching solution pH, with the highest accumulative release content of 26.01 mg/kg at pH 2.0. Sb release contents of blast furnace slag and tailing sand showed positive correlation with the variation of leaching solution pH. The maximum accumulative release contents of these two samples were 215.91 and 147.83 mg/kg, respectively, when leaching solution pH was 7.0. In summary, Sb release capacity of the three samples in descending order was tailing sand, blast furnace slag and mining waste rock. pH and EC of the leachate in dynamic test varied independently with the initial pH of leaching solution while showing close relationship with mineral hydrolysis in the waste.     

双酚A及其类似物对斑马鱼胚胎及幼鱼的毒性效应

为探讨双酚A及其类似物对鱼类早期生长发育的毒性效应,研究了双酚A及其7种类似物对斑马鱼胚胎及仔鱼的毒性效应。通过对胚胎的孵化率、心率、仔鱼体长等指标进行测定分析,结果显示:(1)双酚A及其7种类似物都可使斑马鱼胚胎出现心包水肿、卵黄囊肿、脊柱弯曲和尾部弯曲等症状。(2)综合考虑斑马鱼78 hpf胚胎心率、120 hpf胚胎孵化率及7 dpf仔鱼体长抑制率等指标,8种受试物中双酚P(BPP)的毒性最大,其次是双酚AP(BPAP)、双酚AF(BPAF)、双酚Z(BPZ),然后是双酚A(BPA)、双酚B(BPB)、双酚F(BPF),双酚S(BPS)的毒性最小,每种受试物的浓度与受精卵的孵化率、仔鱼心率呈明显负相关关系,与体长抑制率呈明显正相关关系。8种受试物毒性与辛醇-水分配系数(log K_(OW))呈正相关关系,log K_(OW)越大毒性则越大。     

7种农药对管氏肿腿蜂的毒性及初级风险评价

为评估农药对寄生类自然天敌昆虫的安全性,选择管氏肿腿蜂(Scleroderma guani Xiao et Wu)作为受试生物,采用管测药膜法测定了3种杀虫剂、2种除草剂、2种杀菌剂对其致死效应,并根据田间推荐剂量计算暴露量,采用风险商值HQ对杀虫剂进行风险评估。结果显示,与空白对照比较,3种杀虫剂均具明显毒性作用,其中丁硫克百威、吡虫啉和呋虫胺对管氏肿腿蜂的24 h半致死量(24 h-LR50)分别为5.11、2.92和0.06 g a.i.·ha-1,农田内风险商值分别为60.23、16.64和3 105。除草剂和杀菌剂在3倍最大田间推荐剂量作用下,24 h管氏肿腿蜂死亡率均小于50%。上述结果表明,在田间推荐用量下,3种杀虫剂对管氏肿腿蜂的初级风险评价为存在高风险,建议进一步开展高级阶段风险评估或者采取合理的风险管理措施来降低风险;除草剂和杀菌剂对管氏肿腿蜂的风险可接受。     

Bringing together raptor collections in Europe for contaminant research and monitoring in relation to chemicals regulations

Raptors are good sentinels of environmental contamination and there is good capability for raptor biomonitoring in Europe. Raptor biomonitoring can benefit from natural history museums (NHMs), environmental specimen banks (ESBs) and other collections (e.g. specialist raptor specimen collections). Europe’s NHMs, ESBs and other collections hold large numbers of raptor specimens and samples, covering long periods of time. These collections are potentially a valuable resource for contaminant studies over time and space. There are strong needs to monitor contaminants in the environment to support EU and national chemical management. However, data on raptor specimens in NHMs, ESBs and other collections are dispersed, few are digitised, and they are thus not easy to access. Specimen coverage is patchy in terms of species, space and time. Contaminant research with raptors would be facilitated by creating a framework to link relevant collections, digitising all collections, developing a searchable meta-database covering all existing collections, making them more visible and accessible for contaminant research. This would also help identify gaps in coverage and stimulate specimen collection to fill gaps in support of prioritised contaminant monitoring. Collections can further support raptor biomonitoring by making samples available for analysis on request.     

Pollution characteristics and potential ecological risk assessment of metals in the sediments of Xiaoqing River,Jinan

Environmental Science and Pollution Research - The spatial–temporal changing characteristics and potential ecological risk combined with local policies and industrial status were analyzed....     

Spatial variation and toxicity assessment for heavy metals in sediments of intertidal zone in a typical subtropical estuary (Min River) of China

Environmental Science and Pollution Research - Sediment samples were collected in five marshes (C1, Phragmites australis marsh; C2, P. australis and Cyperus malaccensis marsh; C3, C. malaccensis...     

CdIn2S4/复合材料的制备及光降解罗丹明B

利用高压静电纺丝技术,制得含有羧基的导电聚合物纤维(聚偏氟乙烯/苯乙烯-马来酸酐共聚物/纳米石墨),高温水热条件下在纤维表面制备CdIn2S4颗粒,得到CdIn2S4/导电聚合物纤维复合材料。运用扫描电子显微镜(SEM)、X射线衍射仪(XRD)、紫外-可见吸收光谱仪(UV-Vis)和热失重分析仪(TGA)对复合材料的结构进行表征。并利用350 W氙灯模拟太阳光进行光催化降解罗丹明B。结果发现,CdIn2S4/导电聚合物纤维复合材料的降解效率高于CdIn2S4粉体和Degussa P25 TiO2粉体,光催化降解3 h,罗丹明B的降解率为96.2%。