不同状态下的同一污泥胞外聚合物提取方法研究

以由厌氧污泥向好氧污泥转变前后2种不同状态下的污泥为研究对象,采用5种不同方法对污泥胞外聚合物(EPS)进行了提取实验。实验结果表明,NaOH法提取的EPS含量最高,但会导致胞内物质泄漏。CER和离心提取法较温和,但EPS产量不高。甲醛-NaOH和H2SO4法提取的EPS含量较高,且无大量细胞自溶发生,是有效的EPS提取方法。厌氧污泥转变为好氧污泥后蛋白质/多糖(PN/PS)比例有所增加,表明EPS各组分含量发生改变。红外分析表明厌氧污泥转变为好氧污泥前后EPS中主要组成成分没有发生改变,但各成分含量有所增加,特征明显的峰表明EPS中存在蛋白质、多聚糖。     

光合细菌(PSB)处理明胶废水中填料挂膜性能研究

分别以纤维填料和毛刷填料为载体,采用优势菌种挂膜法,利用光合细菌处理明胶生产过程中产生的磷钙废水。两种填料表现出不同的挂膜效果,综合比较二者的挂膜时间、最终COD去除率和TP含量后得出毛刷填料挂膜性能优于纤维填料,其挂膜时间为23 d,最终COD去除率和TP含量分别达到93%,2.8 mg/L,在磷钙水处理中有适应性。通过对2种填料的电镜分析,发现纤维填料表面挂膜前后没有变化且十分光滑,而毛刷填料挂膜前表面粗糙,挂膜后表面有鳞片状突起,粗糙的表面状况有利于光合细菌的附着,最终促进生物膜功效的发挥。废水中Ca2+和pH是影响填料挂膜的主要因素。     

渗透汽化复合膜分离废水中的低浓度甲醇

采用两种商品化渗透汽化复合膜--GKSS-GS膜和PDMS-P膜分离模拟低浓度甲醇废水,考察了操作温度、甲醇质量分数、废水流量对膜渗透汽化性能的影响.实验结果表明:随温度升高、废水中甲醇质量分数的增大,两种膜的渗透通量都呈增加趋势;GKSS-GS膜的分离系数变化较明显,而PDMS-P膜的分离系数变化较小;废水流量对渗透通量和分离系数的影响均较小.在最佳条件下,GKSS-GS膜的渗透通量为914.6 g/(m~2·h),分离系数为5.6;PDMS-P膜的渗透通量为1 887.2 g/(m~2·h),分离系数为4.8.     

消防头盔对冲击加速度的防护作用

本文通过论述消防头盔对冲击加速度的防护原理、试验方法和试验结果,分析了不同方向冲击时,消防头盔对冲击加速度的防护作用,提出改进消防头盔设计的一些设想。     

十三烷基苯磺酸钠和辛基酚聚氧乙烯醚二元复配溶液的定量分析

采用向十三烷基苯磺酸钠（STBS）和非离子表面活性剂辛基酚聚氧乙烯醚（OP-10）二元复配溶液中添加β-环糊精（β-CD）的方法,降低STBS和OP-10之间定量检测时的相互干扰。实验结果表明：添加β-CD时,可提高STBS的检测准确性,降低STBS对OP-10的检测干扰;在二元复配溶液中,STBS和OP-10的方法回收率分别在100.8%~102.0%,97.4%~102.2%之间,检测误差分别在2.0%和2.6%以内;Cl^-,SO₄^2-,Na⁺,Ca²⁺的存在对二元复配溶液中STBS和OP-10的检测干扰可忽略;将该方法应用于地层水水样中,仍可准确定量分析STBS和OP-10的含量。     

硫酸法制二氧化钛生产中废酸浓缩技术的述评

介绍和评价了国内外硫酸法制二氧化钛生产中废酸的浓缩技术,从工艺、设备及材质3方面分析了国内在二氧化钛废酸处理中存在的问题,指出最有效的解决措施是：以防为主,改善工艺条件;使硫完全参与反应,减少硫的损失和对环境的破坏;完善配套设施,提高设备质量;综合考虑废酸、新酸和钛铁矿的物料配比;选择耐腐蚀性较好的复合材料作为设备材质;最终使废酸少产生或无产生。     

TiO_2/PTh/Fe_3O_4催化剂制备及光催化与磁回收性能

以聚噻吩磁性微珠PTh/Fe3O4(PF)为载体,采用低温水热法(170℃,pH=7±0.2)在其表面负载TiO2,制备了壳/壳/核结构的磁载光催化剂TiO2/PTh/Fe3O4(TPTF)。用透射电子显微镜(TEM)、X射线衍射仪(XRD)、傅里叶红外分光光度计(FT-IR)、振动样品磁强计(VSM)对催化剂的形貌、物相组成、表面性质、磁学性质进行了表征。以苯酚为模拟污染物,评价其光催化活性;通过自制的磁回收装置,考察其磁回收特性。结果表明,TiO2晶粒大小在4~6 nm之间,具有混晶结构(锐钛矿型占93.6%,金红石型占6.4%);当nTiO2∶n噻吩单体∶nFe3O4=75∶2.5∶1时,TPTF的催化活性最佳;P25、纯TiO2、TPTF(nTiO2∶n噻吩单体:nFe3O4=75∶2.5∶1)和TiO2/Fe3O4(TF)光催化降解苯酚的速率常数分别是0.0371、0.0302、0.0253和0.0106 min-1;TPTF循环使用5次,其反应速率常数、饱和磁化强度以及磁回收率为0.0205 min-1、1.59emu/g和89.3%,比第1次的0.0253 min-1、1.85 emu/g和94.7%略有降低。     

Analysis and discussion on formation and control of primary particulate matter generated from coal-fired power plants

Particulate matter (PM) has been becoming the principal urban pollutant in many major cities in China, and even all over the world. It is reported that the coal combustion process is one of the main sources of PM in the atmosphere. Therefore, an investigation of formation and emission of fine primary PM in coal combustion was conducted. First, the sources and classification of coal-fired primary PM were discussed; then their formation pathways during the coal combustion process were analyzed in detail. Accordingly, the emission control methods for fine particles generated from coal-fired power plants were put forward, and were classified as precombustion control, in-combustion control, and postcombustion control. Precombustion control refers to the processes for improving the coal quality before combustion, such as coal type selection and coal preparation. In-combustion control means to take measures for adjusting the combustion conditions and injection of additives during the combustion process to abate the formation of PM. Postcombustion control is the way that the fine PM are aggregated into larger ones by some agglomeration approaches and subsequently are removed by dust removal devices, or some high-performance modifications of conventional particle emission control devices (PECDs) can be taken for capturing fine particles. Finally, some general management suggestions are given for reducing fine PM emission in coal-fired power plants.

ImplicationsThe analysis and discussions of coal properties and its combustion process are critical to recognizing the formation and emission of the fine primary PM in combustion. The measures of precombustion, in-combustion, and postcombustion control based on the analysis and discussions are favorable for abating the PM emission. Practically, some measures of implementation do need the support of national policies, even needing to sacrifice economy to gain environmental profit, but this is the very time to execute these, and high-performance PECDs, especially novel devices, should be used for removing fine PM in flue gas.     

Food utilization and growth of cutworm Spodoptera litura Fabricius larvae exposed to nickel,and its effect on reproductive potential

Food utilization and growth of the 5th and 6th instar Spodoptera litura Fabricius larvae, and its effect on reproduction potential was evaluated by feeding larvae diets with different doses of Ni for 3 generations. Dose-dependent relationships between Ni levels and food consumption and growth were variable with different larval developmental period and Ni exposure duration. RCR, AD and RGR of the 6th instar larvae were much more affected by Ni exposure than those of 5th instar larvae, and the effects were strongest in the 3rd generation. It was found that RCR was significantly stimulated after 1 and 20 mg kg⁻¹ Ni exposure, while AD was significantly inhibited after 1, 5, 10 and 40 mg kg⁻¹ Ni exposure. However, lower levels of Ni (?5 mg kg⁻¹) significantly increased and higher levels of Ni (?10 mg kg⁻¹) significantly decreased RGR. In 3 successive generations, 10 mg kg⁻¹ Ni significantly increased the ECI and ECD of the 5th instar larvae, and 5 mg kg⁻¹ Ni significantly increased the ECD of the 6th instar larvae. However, ECD were all significantly inhibited with 20 mg kg⁻¹ Ni exposure. Results also revealed that durations of larvae were shortened at low levels of Ni, but extended at high levels of Ni. Fecundity was inhibited by the highest Ni doses in each generation, while improved by low Ni doses in the 3rd generation. Hatching rates in all treatments were significantly decreased in a Ni dose-dependent manner. Study indicated that effects of Ni on these parameters were predominant with the increasing Ni exposure period.     

The early warning of aquatic organophosphorus pesticide contamination by on-line monitoring behavioral changes of Daphnia magna

In this paper, the movement behavior of Daphnia magna was studied as a bio-indicator of organophosphorous pesticide (OP) contamination, using an on-line bio-monitoring method, the Multispecies Freshwater Biomonitor. A static test of acute toxicity test revealed the 24-h and 48-h LC(50) values (95% confidence limit) for Daphnia magna to be respectively 0.45 microg/l and 0.21 microg/l for dipterex 3.80 microg/l and 0.90 microg/l for malathion, and 1.25 microg/l and 0.38 microg/l for parathion. The behavior strength of Daphnia magna was a sensitive indicator of sublethal OP stress and resulted in significant concentration-response relationships for the three OPs. Increasing OP concentration will result in more intensive behavioral responses of Daphnia magna and shorter response time, which could be described by the Stepwise Stress Model (SSM). Therefore movement behavior can be effectively applied in early warning of environment quality by on-line bio-monitoring. The intensive changes in behavior strength of Daphnia magna over a short time follow the SSM concept and can be used as an indicator of early stress response to OP accidental contamination.