Storm water contamination and its effect on the quality of urban surface waters

We studied the effect of storm water drained by the sewerage system and discharged into a river and a small reservoir, on the example of five catchments located within the boundaries of the city of Poznań (Poland). These catchments differed both in terms of their surface area and land use (single- and multi-family housing, industrial areas). The aim of the analyses was to explain to what extent pollutants found in storm water runoff from the studied catchments affected the quality of surface waters and whether it threatened the aquatic organisms. Only some of the 14 studied variables and 22 chemical elements were important for the water quality of the river, i.e., pH, TSS, rain intensity, temperature, conductivity, dissolved oxygen, organic matter content, Al, Cu, Pb, Zn, Fe, Cd, Ni, Se, and Tl. The most serious threat to biota in the receiver came from the copper contamination of storm water runoff. Of all samples below the sewerage outflow, 74 % exceeded the mean acute value for Daphnia species. Some of them exceeded safe concentrations for other aquatic organisms. Only the outlet from the industrial area with the highest impervious surface had a substantial influence on the water quality of the river. A reservoir situated in the river course had an important influence on the elimination of storm water pollution, despite the very short residence time of its water.     

Trace level determination of selected sulfonylurea herbicides in wetland sediment by liquid chromatography electrospray tandem mass spectrometry

Sulfonylurea herbicides are widely used in crop production on the Canadian prairies and a portion of these herbicides applied to cropland are inevitably lost to surrounding aquatic ecosystems. Little is known regarding the presence of sulfonylurea herbicides in wetlands located amongst cropland. This paper describes a new analytical method for the extraction and the determination of seven sulfonylurea herbicides (thifensulfuron-methyl, tribenuron-methyl, ethametsulfuron-methyl, metsulfuron-methyl, rimsulfuron, nicosulfuron and sulfosulfuron) in wetland sediment. The method provided > 85% analyte recovery from fortified sediment for six of the seven sulfonylurea herbicides with a limit of quantification (LOQ) of 1.0 μ g kg^{? 1}. Tribenuron-methyl had significantly lower recovery compared to the other six sulfonylurea herbicides (LOQ = 2 μ g kg^{? 1}). Mean recovery standard deviations were < 10%. This methodology was used to quantify sulfonylurea herbicide residues in sediment samples collected from prairie wetlands situated within the agricultural landscape of Saskatchewan and Manitoba, Canada. This is the first-known detection of sulfonylurea herbicide residues in prairie wetland sediments. Ethametsulfuron-methyl, sulfosulfuron and metsulfuron-methyl, the three most environmentally persistent of the seven sulfonylurea herbicides monitored in the surveillance component of this study, were most frequently detected in wetland sediment with mean concentrations ranging from 1.2 to 10 μ g kg^{? 1}.     

Fate of PBDEs during food processing: Assessment of formation of mixed chlorinated/brominated diphenyl ethers and brominated dioxins/furans

The aim of this study was to evaluate effects of food processing on PBDE levels, in particular influence of heat treatment on degradation of PBDEs, including possible formation of chlorinated diphenyl ethers or brominated dioxins/furans as degradation products. It was shown that PBDEs heated in the presence of chlorine (from either organic or inorganic sources) formed mixed chlorinated/brominated diphenyl ethers. However, no PCDEs were formed in the presence of lipids. Lipid medium increased stability of PBDEs exposed to UV irradiation. Profile of congeners formed in result of the debromination reaction was significantly different than profiles observed by some other authors in aliphatic organic solvents. Grilling processes increased concentrations (calculated on the fresh product basis) of the studied compounds by 4–8/22–34% for electric/coal grill, respectively. Depending on the congener and on the applied heat treatment, PBDE mass in pork meat after grilling dropped by 26–53%. No detectable quantities of either brominated dioxins or furans were formed during thermal processing of food containing typical levels of PBDEs.     

Phylogenetic diversity of epibiotic bacteria in the accessory nidamental glands of squids (Cephalopoda: Loliginidae and Idiosepiidae)

Bacterial communities were identified from the accessory nidamental glands (ANGs) of European and Western Pacific squids of the families Loliginidae and Idiosepiidae, as also in the egg capsules, embryo and yolk of two loliginid squid species, and in the entire egg of one idiosepiid squid species. The results of phylogenetic analyses of 16S RNA gene (rDNA) confirmed that several phylotypes of α-proteobacteria, γ-proteobacteria and Cytophaga–Flavobacteria–Bacteroides phylum were present as potential symbiotic associations within the ANGs. Several identified clones were related to reference strains, while others had no known close relatives. Gram positive strains were rare in loliginid squids. Several bacterial groups may play important roles in the function of the ANGs, such as production of the toxic compounds involved in egg protection and carotenoid pigments. Within the eggs, no bacteria were associated with embryo or yolk of Loligo vulgaris and Sepioteuthis lessoniana, but α- and γ-proteobacteria were present in the egg capsules. Most bacterial strains detected in the egg capsules were the same as those found in the ANGs. The cephalopods of temperate regions (European cuttlefishes and the squid L. vulgaris) appear to be associated with one Agrobacterium strain (Agro2) while tropical-subtropical strains (Asian and Australian loliginids) are associated with Silicibacter-related strains, suggesting a biogeographic clustering for the Agrobacterium-like strains.     

The influence of environmental factors on the carbon dioxide flux across the water–air interface of reservoirs in south-eastern Poland

Studies concerning the emission of carbon dioxide(CO_2) were carried out in 2009–2012 for six reservoirs located in four provinces of south-eastern Poland. The CO_2 flux across the water–air interface was measured using the "static chamber" method. The measured fluxes of CO_2(FCO_2) ranged from-30.64 to 183.78 mmol/m~2/day, and the average values varied in the range from-3.52 to 82.11 mmol/m2/day. In most of the cases, emission of CO_2 to the atmosphere was observed. The obtained values of CO_2 fluxes were comparable to values typical for other temperate reservoirs. Analysis of the influence of selected environmental factors on the FCO_2 showed that it depends on parameters characterizing both the sediments and surface water. The CO_2 flux at the water–air interface was positively correlated with parameters of bottom sediments such as porosity, content of organic carbon and total nitrogen; and negatively with p H value and δ~(13)C of organic carbon. In the case of the parameters characterizing surface water, positive dependences on the concentrations of nitrate and total nitrogen, and negative relationships with water temperature and chlorophyll a concentrations, were found.     

Investigation on air quality of specific indoor environments—spa salons located in Gdynia,Poland

Environmental Science and Pollution Research - Due to excessive application of essential oils and scented products in spa salons during aromatherapy and massage sessions, the elevated concentration...     

Geographical location and key sensitivity issues of post-industrial regions in Europe

Primary objectives of our work were to spatially delineate post industrial areas of the EU-27 and indicate key environmental, social and economic sensitivity issues for these regions. The density of industrial sites within NUTS-x regions for EU-27 countries was assessed by using CORINE 2000 land cover layer. A development of postindustrial society in Europe represents a strong geographic diversity. There are distinct historical and current differences between regions which form major groups, comprising similar internal characteristics and definable trends in environmental and socioeconomic sense. Regions grouped into postindustrial clusters are fundamentally different from the European average, and are facing specific problems related to global market and political changes. Eastern postindustrial regions can be characterized as socially and economically weak, exhibiting high unemployment rate, low GDP, negative population growth and a strong environmental pressure, represented by a high density of dump sites. Most of the western EU postindustrial areas have been successfully recovered and moved into new economy as shown by most of the indicators. In urban postindustrial zones, however, emission sources of pollutants seem to continually be a major problem--not necessarily in terms of exceeding thresholds, but through a remarkable difference in the amount of pollutants produced relative to other regions.     

Beryllium natural background concentration and mobility: a reappraisal examining the case of high Be-bearing pyroclastic rocks

Beryllium is widely distributed in soils at low levels, but it can also occur naturally in higher concentrations in a variety of materials exploited for many industrial applications. Beryllium is also one of the most toxic natural elements and is known to be a human carcinogen. A concise account of the literature data on baseline concentrations of Be in soils illustrates the possibility of worldwide presence of areas with a high natural background concentration of Be (up to 300 mg/kg), the crustal abundance of which is generally estimated to be in the range 2–6 mg/kg. Nevertheless, the number of available data is rather limited in comparison with those about other toxic elements such as Pb, Cd and Cr. This has probably caused the choice of low values of concentration level as the reference for the definition of soil contamination: these values are not always realistic and are not applicable to large areas. As a case study, we report and analyse a diffuse, unusually high (up to 80 mg/kg, average approximately 20 mg/kg), natural occurrence of beryllium in loose and poorly consolidated pyroclastic layers related to the Pleistocene activity of the Vico volcano. Additionally, the analysis of Be leachability has been carried out, providing evidence of a not negligible mobility in contrast with the scarce data presented in the literature that usually indicate beryllium as an element with low mobility in oxidising surface environmental conditions. This research marks the beginning of a possible reappraisal of beryllium geochemical behaviour and background levels, providing more realistic reference values for risk assessment and land management.     

Microscale Toxicity Identification Evaluation (TIE) for interstitial water of estuarine sediments affected by multiple sources of pollution

Estuaries in the world are affected by different contamination sources related to urbanisation and port/industrial activities. Identifying the substances responsible for the environmental toxicity in estuaries is challenging due to the multitude of stressors, both natural and anthropogenic. The Toxicity Identification and Evaluation (TIE) is a suitable way of determining causes of toxicity of sediments, but it poses difficulties since its application is labour intensive and time consuming. The aim of this study is to evaluate the diagnosis provided by a TIE based on microscale embryotoxicity tests with interstitial water (IW) to identify toxicants in estuarine sediments affected by multiple stressors. TIE showed toxicity due to different combinations of metals, apolar organic compounds, ammonia and sulphides, depending on the contamination source closest to the sampling station. The microscale TIE was able to discern different toxicants on sites subject to different contamination sources. There is good agreement between the results indicated in the TIE and the chemical analyses in whole sediment, although there are some disagreements, either due to the sensitivity of the test used, or due to the particularities of the use of interstitial water to assess the sediment toxicity. The improvement of TIE methods focused on identifying toxicants in multiple-stressed estuarine areas are crucial to discern contamination sources and subsidise management strategies.

     

Possibilities of solar energy utilization

Geographic and economic aspects of solar energy are linked with the various physical and chemical methods of solar energy conversion to heat, electricity, and endothermal chemical reactions. Principles of the conversion methods are summarized and the efficiencies of various methods reviewed briefly. Methods of concentrating the solar energy are described.